Materials Sciences and Applications

Vol.4 No.3(2013), Paper ID 29521, 8 pages

DOI:10.4236/msa.2013.43020

 

On the Role of Copper and Cooling Rates on the Microstructure, Defect Formations and Mechanical Properties of Al-Si-Mg Alloys

 

Salem Seifeddine, Emma Sjölander, Toni Bogdanoff

 

Materials and Manufacturing-Casting, Department of Mechanical Engineering, School of Engineering, J?nk?ping University, J?nk?ping, Sweden.
Materials and Manufacturing-Casting, Department of Mechanical Engineering, School of Engineering, J?nk?ping University, J?nk?ping, Sweden.
Materials and Manufacturing-Casting, Department of Mechanical Engineering, School of Engineering, J?nk?ping University, J?nk?ping, Sweden.

 

Copyright © 2013 Salem Seifeddine, Emma Sjölander, Toni Bogdanoff et al. This is an open access article distributed under the Creative Commons Attribution License, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.

 

How to Cite this Article


S. Seifeddine, E. Sjölander and T. Bogdanoff, "On the Role of Copper and Cooling Rates on the Microstructure, Defect Formations and Mechanical Properties of Al-Si-Mg Alloys," Materials Sciences and Applications, Vol. 4 No. 3, 2013, pp. 171-178. doi: 10.4236/msa.2013.43020.

Copyright © 2018 by authors and Scientific Research Publishing Inc.

Creative Commons License

This work and the related PDF file are licensed under a Creative Commons Attribution 4.0 International License.