[1]
|
Structural Composite Materials
Composites Science and Technology,
2024
DOI:10.1007/978-981-99-5982-2_14
|
|
|
[2]
|
Microstructure and properties of aluminium matrix hybrid nanocomposite
Canadian Metallurgical Quarterly,
2024
DOI:10.1080/00084433.2024.2306047
|
|
|
[3]
|
Mechano-tribological investigations of Al-%Wt. of boron nitride as metal-ceramic composites
INTERNATIONAL CONFERENCE ON RECENT TRENDS IN COMPOSITE SCIENCES WITH COMPUTATIONAL ANALYSIS,
2024
DOI:10.1063/5.0182965
|
|
|
[4]
|
Wear and frictional attributes of Al-alloy hybrid composite dispersed with hard-ceramic (ZrO2) and solid-lubricant (Gr) particles
Journal of Dispersion Science and Technology,
2023
DOI:10.1080/01932691.2023.2220784
|
|
|
[5]
|
The Use of Cu-W Sinters in MIG-MAG Welding Contact Tips for Improved Continuous Wire Abrasion Performance
Journal of Materials and Mechatronics: A,
2023
DOI:10.55546/jmm.1198415
|
|
|
[6]
|
Dry sliding wear response of aluminium matrix composites (AMCs): a critical review
Materials Research Express,
2023
DOI:10.1088/2053-1591/acb63c
|
|
|
[7]
|
Investigation on mechanical and Tribological properties of Al7075 reinforced with silicon carbide and graphite particulates
Materials Today: Proceedings,
2022
DOI:10.1016/j.matpr.2021.11.190
|
|
|
[8]
|
The Use of Cu-W Sinters in MIG-MAG Welding Contact Tips for Improved Continuous Wire Abrasion Performance
Journal of Materials and Mechatronics: A,
2022
DOI:10.55546/jmm.1198415
|
|
|
[9]
|
Dry Sliding Wear Study on AA6061/SiCp Nano and AA6061/SiCp/Gr Hybrid Nanocomposites
Silicon,
2022
DOI:10.1007/s12633-022-01908-z
|
|
|
[10]
|
Wear Investigation of Aluminum Alloy Surface Layers Fabricated through Friction Stir Welding Method
Advances in Materials Science and Engineering,
2022
DOI:10.1155/2022/4120145
|
|
|
[11]
|
Investigation on mechanical and Tribological properties of Al7075 reinforced with silicon carbide and graphite particulates
Materials Today: Proceedings,
2022
DOI:10.1016/j.matpr.2021.11.190
|
|
|
[12]
|
Optimization and Wear Properties for the Composites of Metal Matrix AA8011/Boron Nitride Using Taguchi Method
Journal of Nanomaterials,
2022
DOI:10.1155/2022/6957545
|
|
|
[13]
|
Experimental Investigation on Tribological Behaviour of AA6066: HSS-Cu Hybrid Composite in Dry Sliding Condition
Advances in Materials Science and Engineering,
2022
DOI:10.1155/2022/9349847
|
|
|
[14]
|
Dry Sliding Wear Study on AA6061/SiCp Nano and AA6061/SiCp/Gr Hybrid Nanocomposites
Silicon,
2022
DOI:10.1007/s12633-022-01908-z
|
|
|
[15]
|
Investigations into dry‐sliding wear behaviour of a novel composite (aluminium‐magnesium‐silicon‐copper‐silicon carbide) produced by powder metallurgy route
Materialwissenschaft und Werkstofftechnik,
2021
DOI:10.1002/mawe.202000140
|
|
|
[16]
|
Study of doping effect on properties of AlSiC composite: A review
Materials Today: Proceedings,
2021
DOI:10.1016/j.matpr.2021.05.332
|
|
|
[17]
|
Wear behaviour of Al/(Al2O3 + ZrB2 + TiB2) hybrid composites fabricated by hot pressing
International Journal of Materials Research,
2021
DOI:10.3139/146.111165
|
|
|
[18]
|
Investigations into dry‐sliding wear behaviour of a novel composite (aluminium‐magnesium‐silicon‐copper‐silicon carbide) produced by powder metallurgy route
Materialwissenschaft und Werkstofftechnik,
2021
DOI:10.1002/mawe.202000140
|
|
|
[19]
|
Preparation and characterization of alloy Al –SiC made by using powder metallurgy method
THE 1ST INTERNATIONAL CONFERENCE ON PHYSICS AND APPLIED PHYSICS (THE 1ST ICP&AP) 2019: Fundamental and Innovative Research for Improving Competitive Dignified Nation and Industrial Revolution 4.0,
2020
DOI:10.1063/5.0005086
|
|
|
[20]
|
Design and manufacturing of a novel continuous casting technique for the addition of ceramic particulate reinforcement, alloying elements and grain refiners in Al-system
CIRP Journal of Manufacturing Science and Technology,
2020
DOI:10.1016/j.cirpj.2020.06.009
|
|
|
[21]
|
Mechanical and tribological properties of AA7075-T6 metal matrix composite reinforced with ceramic particles and aloevera ash via Friction stir processing
Materials Research Express,
2020
DOI:10.1088/2053-1591/ab9c5e
|
|
|
[22]
|
Experimental Evaluation of Al-Zn-Al2O3 Composite on Piston Analysis by CAE Tools
Mechanics and Mechanical Engineering,
2019
DOI:10.2478/mme-2019-0028
|
|
|
[23]
|
Optimization of wear behaviour using Taguchi and ANN of fabricated aluminium matrix nanocomposites by two-step stir casting
Materials Research Express,
2019
DOI:10.1088/2053-1591/ab0871
|
|
|
[24]
|
Abrasive wear analysis of RZ5/TiC in-situ composites: a statistical approach
Industrial Lubrication and Tribology,
2019
DOI:10.1108/ILT-01-2018-0018
|
|
|
[25]
|
Wear behavior of AA 5083/SiC nano-particle metal matrix composite: Statistical analysis
IOP Conference Series: Materials Science and Engineering,
2018
DOI:10.1088/1757-899X/324/1/012087
|
|
|
[26]
|
Wear Characteristics Comparison of Cast and Powder Metallurgy Based Al and Al-Si Alloy [LM6]
Materials Today: Proceedings,
2018
DOI:10.1016/j.matpr.2017.11.501
|
|
|
[27]
|
Lightweight, Wear Resistant, High Thermal Conductivity Metal Matrix Composite Brake Rotors
SAE Technical Paper Series,
2018
DOI:10.4271/2018-01-1879
|
|
|
[28]
|
OPTIMIZATION AND ANALYSIS OF DRY SLIDING WEAR BEHAVIOR OF STIR CASTED AlSi6Cu4–TiO2 COMPOSITE USING CENTRAL COMPOSITE DESIGN
Surface Review and Letters,
2018
DOI:10.1142/S0218625X19500525
|
|
|
[29]
|
Investigation on Structural Steel and Silicon Carbide Aluminum Metal Matrix Composite Spur Gears Using PTC Creo and ANSYS 16.0
Materials Science Forum,
2018
DOI:10.4028/www.scientific.net/MSF.937.33
|
|
|
[30]
|
Mechanical Properties and Thermal Conductivity of Coal Ash-Recycled High-Density Polyethylene Composite
Journal of Molecular and Engineering Materials,
2018
DOI:10.1142/S2251237318500028
|
|
|
[31]
|
Study of Wear Characteristics of Hematite Reinforced Aluminum Metal Matrix Composites
Materials Today: Proceedings,
2017
DOI:10.1016/j.matpr.2017.02.238
|
|
|
[32]
|
Characteristics of Al-Si-Mg Reinforced SiC Composites Produced by Stir Casting Route
IOP Conference Series: Materials Science and Engineering,
2017
DOI:10.1088/1757-899X/202/1/012089
|
|
|
[33]
|
Tribomechanical behavior of TiCN/TiAlN/WC-C multilayer film on cutting tool inserts for machining
Materials Testing,
2017
DOI:10.3139/120.111060
|
|
|
[34]
|
Effect of wear parameters on dry sliding behavior of Fly Ash/SiC particles reinforced AA 2024 hybrid composites
Materials Research Express,
2017
DOI:10.1088/2053-1591/aa8a3e
|
|
|
[35]
|
Tribolological Behavior of
A356/SiC Metal Matrix Composite Fabricated by Two Different
Techniques
i-manager's Journal on Material Science,
2017
DOI:10.26634/jms.5.2.13655
|
|
|
[36]
|
Experimental Investigation of Wear and Frictional Properties of A356/SiC Metal Matrix Composite
SAE Technical Paper Series,
2017
DOI:10.4271/2017-01-5012
|
|
|
[37]
|
Experimental Study of Surface Integrity of Al/SiC Particulate Metal–matrix Composites in Hot Machining
Procedia CIRP,
2016
DOI:10.1016/j.procir.2016.01.024
|
|
|
[38]
|
Analysis of Composite Material Spur Gear Under Static Loading Condition
Materials Today: Proceedings,
2015
DOI:10.1016/j.matpr.2015.07.278
|
|
|
[39]
|
Comparison of microstructure and wear resistance of A356–SiCp composites processed via compocasting and vibrating cooling slope
Transactions of Nonferrous Metals Society of China,
2015
DOI:10.1016/S1003-6326(15)63867-5
|
|
|
[40]
|
A Study of Porosity Effect on Tribological Behavior of Cast Al A380M and Sintered Al 6061 Alloys
Journal of Surface Engineered Materials and Advanced Technology,
2015
DOI:10.4236/jsemat.2015.51001
|
|
|
[41]
|
Microstructure, mechanical property and wear performance of cold sprayed Al5056/SiCp composite coatings: Effect of reinforcement content
Applied Surface Science,
2014
DOI:10.1016/j.apsusc.2013.10.132
|
|
|
[42]
|
Study of Mechanical Properties & Residual Stresses on Post Wear Samples of A356-SiC Metal Matrix Composites
Procedia Materials Science,
2014
DOI:10.1016/j.mspro.2014.07.374
|
|
|
[43]
|
Development of Aluminium Based Silicon Carbide Particulate Metal Matrix Composite for Spur Gear
Procedia Materials Science,
2014
DOI:10.1016/j.mspro.2014.07.187
|
|
|
[44]
|
The Dry Sliding Wear of Cenosphere -Aluminium Metal Matrix Composite
Advanced Composites Letters,
2014
DOI:10.1177/096369351402300301
|
|
|
[45]
|
Effect of Sliding Distance, Applied Load, and Weight Percentage of Reinforcement on the Abrasive Wear Properties of In Situ Synthesized Al–12%Si/TiC Composites
Tribology Transactions,
2013
DOI:10.1080/10402004.2013.767401
|
|
|
[46]
|
On modeling the abrasive wear characteristics of in situ Al–12%Si/TiC composites
Materials & Design,
2013
DOI:10.1016/j.matdes.2013.02.042
|
|
|
[47]
|
TMS2013 Supplemental Proceedings
2013
DOI:10.1002/9781118663547.ch129
|
|
|
[48]
|
Preparation of Aluminum Metal Matrix Composite with Novel In situ Ceramic Composite Particulates, Developed from Waste Colliery Shale Material
Metallurgical and Materials Transactions B,
2013
DOI:10.1007/s11663-013-9832-x
|
|
|
[49]
|
Evaluate the Effects of Various Surface Roughness on the Tribological Characteristics under Dry and Lubricated Conditions for Al-Si Alloy
Journal of Surface Engineered Materials and Advanced Technology,
2012
DOI:10.4236/jsemat.2012.23027
|
|
|
[50]
|
Wear Characteristics in Al-SiC Particulate Composites and the Al-Si Piston Alloy
Journal of Minerals and Materials Characterization and Engineering,
2011
DOI:10.4236/jmmce.2011.1014104
|
|
|
[51]
|
Some Investigations of Wet Sliding Behaviour of Al - SiC Particulate Composites
Advanced Materials Research,
2011
DOI:10.4028/www.scientific.net/AMR.383-390.2759
|
|
|