Performance Comparison of Three Algorithms Applied to UM2000 Signal Demodulation ()
Abstract
UM2000 signal is a type of multi-audio
frequency-modulated signal which is widely used for railway blocking. Principles
of three typical demodulating algorithms are presented in details in this
paper. Bit error rates of the three methods at different SNRs are achieved by Monte Carlo simulation experiments. Among the three
algorithms, the quadrature demodulation has the best performance at the real
working environment. However, the three methods have the same problem of phase
hopping when noise is too strong.
Share and Cite:
Qiao, Z. and Wang, F. (2013) Performance Comparison of Three Algorithms Applied to UM2000 Signal Demodulation.
Journal of Signal and Information Processing,
4, 58-61. doi:
10.4236/jsip.2013.43B010.
Conflicts of Interest
The authors declare no conflicts of interest.
References
|
[1]
|
H. Hui, F. Ye and J. Wang, “An Improved Analytic Method of Across-zero Detecting,” Aerospace Electronic Warfare, Vol. 23, No. 4, 2007, pp. 50-52.
|
|
[2]
|
L. Zhu and S. Wu, “Digital Demodulation Method for Multi-tone FM Signal in Track Circuit System,” China Railway Science, Vol. 26, No. 5, 2005, pp. 91-95.
|
|
[3]
|
G. Hu, “Digital Signal Processing,” 2nd Edition, Tsinghua University Press, Beijing, 2003.
|
|
[4]
|
L. Nan, “Brief Introduction of Communication Principles,” Tsinghua University Press, Beijing, 2000.
|
|
[5]
|
F. Wang, “Study on the Decoding Arithmetic of the UM2000 Track Circuit Signal,” Mater’s Thesis, China Academy of Railway Sciences, Beijing, 2010.
|