[1]
|
C.-M. Jang, J.-S. Lee, B.-Y. Tak and C.-G. Kim, “Characteristics of Design Parameters for an Industrial Regenerative Blower,” Proceedings of the Summer Conference of The Society of Air-Conditioning and Refrigerating Engineers of Korea, Yongpyeong Resort, June 2012, pp. 175-178. (in Korean).
|
[2]
|
C.-M. Jang and G.-Y. Han, “Enhancement of Performance by Blade Optimization in Two-Stage Ring Blower,” Journal of Thermal Science, Vol. 19, No. 5, 2010, pp. 383-389. doi:10.1007/s11630-010-0398-5
|
[3]
|
Y.-S. Choi, K.-Y. Lee, K.-H. Jeong, Y.-K. Kim and J.-M. Seo, “Design and Performance Evaluation of Side Channel Type Regenerative Blower,” Proceedings of KSME Manufacturing and Design Engineering Division Spring Conference, Jeju, June 2011, pp. 31-32. (in Korean).
|
[4]
|
R. H. Myers and D. C. Montgomery, “Response Surface Methodology: Process and Product Optimization Using Designed Experiments,” John Wiley & Sons, New York, 1995.
|
[5]
|
N. E. Sevant, M. I. G. Bloor and M. J. Wilson, “Aerodynamic Design of a Flying Wing Using Response Surface Methodology,” Journal of Aircraft, Vol. 37, No. 4, 2000, pp. 562-569. doi:10.2514/2.2665
|
[6]
|
“AMCA 210(ASHRAE 51) Standard: Laboratory Methods of Testing Fans for Aerodynamic Performance Rating,” Air Movement and Control Association (AMCA) International, Inc. and ASHRAE, Inc., Arlington Heights, Atlanta, 1999.
|
[7]
|
“CFX-13 User Manual,” ANSYS Inc., Canonsburg, 2011.
|
[8]
|
F. R. Menter, “Two-Equation Eddy-Viscosity Turbulence Models for Engineering Application,” AIAA Journal, Vol. 32, No. 8, 1994, pp. 1598-1605.
doi:10.2514/3.12149
|
[9]
|
A. A. Guinta, “Aircraft Multidisciplinary Design Optimization Using Design of Experimental Theory and Response Surface Modeling Methods,” Ph.D. Dissertant, Virginia Polytechnic Institute and State University, Blacksburg, 1997.
|