|
[1]
|
Fluxing Agents on Ceramification of Composites of MgO-Al2O3-SiO2/Boron Phenolic Resin
|
|
Journal of Wuhan University of Technology-Mater. Sci. Ed.,
2018 |
|
|
|
|
[2]
|
Fluxing Agents on Ceramification of Composites of MgO-Al 2 O 3-SiO 2/Boron Phenolic Resin
|
|
2018 |
|
|
|
|
[3]
|
短切聚酰亚胺纤维增强可瓷化三元乙丙橡胶复合材料的制备与性能 Preparation and properties of ceramifiable ethylene propylene diene monomer rubber composites …
|
|
2017 |
|
|
|
|
[4]
|
Effect of mineral filler additives on flammability, processing and use of silicone-based ceramifiable composites
|
|
Polymer Bulletin,
2017 |
|
|
|
|
[5]
|
Effect of glass frit with low softening temperature on the properties, microstructure and formation mechanism of polysiloxane elastomer-based ceramizable composites
|
|
Polymer Degradation and Stability,
2017 |
|
|
|
|
[6]
|
The thermal stabilisation and ceramifying of silicone rubbers
|
|
International Polymer Science and Technology,
2016 |
|
|
|
|
[7]
|
Effect of the sintering temperature on the microstructure, properties and formation mechanism of ceramic materials obtained from polysiloxane elastomer-based …
|
|
Journal of Alloys and Compounds,
2016 |
|
|
|
|
[8]
|
Effect of the sintering temperature on the microstructure, properties and formation mechanism of ceramic materials obtained from polysiloxane elastomer-based …
|
|
Journal of Alloys and Compounds,
2016 |
|
|
|
|
[9]
|
陶瓷化聚合物研究进展
|
|
特种橡胶制品,
2015 |
|
|
|
|
[10]
|
Tribological Properties of Silicone Rubber-Based Ceramizable Composites Destined for Wire Covers. Part I. Studies of Block-On-Ring Friction Contact
|
|
Tribology in Industry,
2015 |
|
|
|
|
[11]
|
Materials Science of Polymers: Plastics, Rubber, Blends and Composites
|
|
2015 |
|
|
|
|
[12]
|
Boron Oxide as a Fluxing Agent for Silicone Rubber-Based Ceramizable Composites
|
|
2015 |
|
|
|
|
[13]
|
Термостабилизация и керамообразование силиконовых резин
|
|
2015 |
|
|
|
|
[14]
|
Tribological Properties of Silicone Rubber-Based Ceramizable Composites Destined for Wire Covers. Part I. Studies of Block-On-Ring Friction Contact.
|
|
Tribology in Industry,
2015 |
|
|
|
|
[15]
|
Tribology in Industry
|
|
2015 |
|
|
|
|
[16]
|
INFLUENCE OF MOLECULAR STRUCTURE OF COMPONENTS ON CRYSTALLINITY AND MECHANICAL PROPERTIES OF LDPE/EPDM BLENDS
|
|
High Performance Elastomer Materials: An Engineering Approach,
2014 |
|
|
|
|
[17]
|
INTRODUCTION TO CERAMIZABLE POLYMER COMPOSITES
|
|
2014 |
|
|
|
|
[18]
|
Thermal stability of elastic polyurethane
|
|
2014 |
|
|
|
|
[19]
|
Elastomerowe kompozyty ceramizujące
|
|
2014 |
|
|
|
|
[20]
|
Investigation of rubber with microdispersed wastes of silicon carbide
|
|
2014 |
|
|
|
|
[21]
|
High performance elastomer materials: an engineering approach
|
|
2014 |
|
|
|