Composites; Fillers; Mechanical; Properties; Strength - Articles

A Scientific Review on Various Pellet Extruders Used in 3D Printing FDM Processes (Articles)

Yousuf Pasha Shaik, Jens Schuster, Aarif Shaik

Open Access Library Journal Vol.8 No.8，July 29, 2021

DOI: 10.4236/oalib.1107698 1,298 Downloads 11,692 Views Citations
Microstructures and Mechanical Properties of Al-Zn-Sn Bearing Alloys for High Performance Applications (Articles)

Nermin Ali Abdelhakim, Rizk Mostafa Shalaby

World Journal of Engineering and Technology Vol.9 No.3，August 17, 2021

DOI: 10.4236/wjet.2021.93045 331 Downloads 1,664 Views Citations
Chemical Modification on Woven Jute and Nonwoven Wet-Laid Glass Fiber Sheet Reinforced Poly-(ε-Caprolactone) Composites (Articles)

Mohammad Muzammel Hossen, Mohammad Obaidur Rahman

Open Journal of Composite Materials Vol.11 No.4，September 1, 2021

DOI: 10.4236/ojcm.2021.114006 359 Downloads 1,785 Views Citations
Effects of the Solution Treatment on Microstructural Evolution, Mechanical Properties, and Fracture Mechanism of Nickel-Based GH4099 Superalloy (Articles)

Guangsheng Xu, Chuan Wu, Zhenhua Liu, Yilong Wang, Zhanying Zhang, Yun Li, Ping Hu

J. of Minerals and Materials Characterization and Eng. Vol.9 No.6，November 9, 2021

DOI: 10.4236/jmmce.2021.96037 376 Downloads 1,519 Views Citations
Structural Characterization of Bauxite Red Mud to Utilization in Ceramic Wall/Roofing Tile: Effect of Temperature on Mechanical Properties and Physic-Chemical Stability (Articles)

Ahmat Tom, Paul Nestor Djomou Djonga, Cornelius Tsamo, Hambate Gomdje Valery, Joshiane Azangueu, Sandrine Kamdoum Noukelag

Advances in Materials Physics and Chemistry Vol.12 No.1，January 31, 2022

DOI: 10.4236/ampc.2022.121001 297 Downloads 1,308 Views Citations
Experimental Study on the Effect of Volume Ratio of Steel Fiber on Mechanical Properties of Ceramsite Concrete (Articles)

Ziyi Guo

Open Access Library Journal Vol.9 No.4，April 8, 2022

DOI: 10.4236/oalib.1108571 121 Downloads 894 Views Citations
Development and Evaluation of the Mechanical Properties of Coconut Fibre Reinforced Low Density Polyethylene Composite (Articles)

Ahmed Mohammed Bukar, Abubakar Mohammed El-Jummah, Abba Alhaji Hammajam

Open Journal of Composite Materials Vol.12 No.3，June 17, 2022

DOI: 10.4236/ojcm.2022.123007 295 Downloads 1,878 Views Citations
Characterization of Clay Materials and Performance Evaluation of Fired Clay Composites Made for Low-Cost Housing (Articles)

Paulette Cathy Mengue, Michel Mbessa, Rodrigue Cyriaque Kaze, Adeyemi Adesina, Chrispin Pettang

J. of Minerals and Materials Characterization and Eng. Vol.10 No.4，July 12, 2022

DOI: 10.4236/jmmce.2022.104024 251 Downloads 1,323 Views Citations
Comparative Study of the Thermal and Mechanical Properties of Foamed Concrete with Local Materials (Articles)

Adelaïde Lareba Ouédraogo, Sayouba Kabré, Etienne Malbila, Abdoulaye Compaoré, Ramatou Saré, Paul Ilboudo, Sié Kam, Bruno Korgo, Dieudonné Joseph Bathiebo, Florent P. Kieno, Philippe Blanchard

World Journal of Engineering and Technology Vol.10 No.3，August 3, 2022

DOI: 10.4236/wjet.2022.103035 259 Downloads 1,305 Views Citations
Study of Attapulgite as an Additive in Reinforced Concrete by Substitution of Cement and Its Effects on the Durability Properties of Hardened Concrete (Articles)

Malang Bodian, Dame Keinde, Ismaila Yade, Kinda Hannawi, Prince William Agbodjan, Modou Fall, Aveline Darquennes

Open Journal of Civil Engineering Vol.12 No.3，August 8, 2022

DOI: 10.4236/ojce.2022.123018 215 Downloads 1,220 Views Citations
Wear Evaluation of Copper-Nickel-Aluminum Alloys under Extreme Conditions (Articles)

Rene Guardian, Isai Rosales-Cadena, Constancio Diaz-Reyes, Juan Antonio Ruiz-Ochoa

J. of Minerals and Materials Characterization and Eng. Vol.11 No.1，December 30, 2022

DOI: 10.4236/jmmce.2023.111002 178 Downloads 760 Views Citations
Manufacturing and Product Analysis of Non-Woven and Paper Based Epoxy Composites (Articles)

Vinay Kumar Kotike, Jens Schuster, Yousuf Pasha Shaik

Open Journal of Composite Materials Vol.13 No.2，April 24, 2023

DOI: 10.4236/ojcm.2023.132003 145 Downloads 1,359 Views Citations
Mechanical Characterization of Rhecktophyllum Camerunense (RC) Fiber Reinforced Concrete (Articles)

Jean Calvin Bidoung, Nicolas Stéphane Nyobe, Mey Mahamat Imar, Lucien Meva’a

Journal of Materials Science and Chemical Engineering Vol.11 No.8，August 29, 2023

DOI: 10.4236/msce.2023.118002 119 Downloads 530 Views Citations
Effect of Titanium Content on the Structure, Electrical Conductivity and Mechanical Properties of Cu-3wt%Si Alloys (Articles)

C. W. Onyia, E. E. Nnuka, C. N. Nwambu, C. M. Ekwedigwe

Open Access Library Journal Vol.10 No.12，December 27, 2023

DOI: 10.4236/oalib.1110902 80 Downloads 445 Views Citations
Influence of Non-Natural Ageing Temperature on the Microstructural Characteristics and Mechanical Properties of Cast Aluminum 6063 Alloy (Articles)

Oluwole Oladele, Ayodele Adedeke, Olajesu Olanrewaju, Samuel Olusunle

J. of Minerals and Materials Characterization and Eng. Vol.12 No.2，March 13, 2024

DOI: 10.4236/jmmce.2024.122007 123 Downloads 427 Views Citations
A Systematic Review of the Effects of Soil Stabilization on Soil Mechanical Properties: A Comparative Study of Fly Ash, Cement and Lime (Articles)

Duke Magara, Haicheng She

Open Access Library Journal Vol.11 No.3，March 28, 2024

DOI: 10.4236/oalib.1111319 109 Downloads 853 Views Citations
Characterization and Modeling of Mechanical Properties of Additively Manufactured Coconut Fiber-Reinforced Polypropylene Composites (Articles)

George Mosi, Bernard W. Ikua, Samuel K. Kabini, James W. Mwangi

Advances in Materials Physics and Chemistry Vol.14 No.6，June 21, 2024

DOI: 10.4236/ampc.2024.146008 122 Downloads 753 Views Citations
Effect of Exchange-Correlation Functional on the Structural, Mechanical, and Optoelectronic Properties of Orthorhombic RbSrBr₃ Perovskite (Articles)

Fatema Najrin, Rabeya Bakar Sarna, Md. Alamin Sarker, Budrun Neher, Md. Mahbubur Rahman Bhuiyan, Farid Ahmed

Materials Sciences and Applications Vol.15 No.6，June 28, 2024

DOI: 10.4236/msa.2024.156010 88 Downloads 387 Views Citations
Experimental Study on the Durability of Red Clay Modified by Plant Fiber (Articles)

Zhenglong Wei, Yanheng Li, Zhichao Lin, Beixin Zhou, Bai Yang

Open Access Library Journal Vol.11 No.8，August 14, 2024

DOI: 10.4236/oalib.1111970 36 Downloads 536 Views Citations
Evaluation of Nylon 6 and Nylon 66 Cord Fabrics for Scooter Tyre Production under Different Curing Conditions (Articles)

Gasim Altundal, Husnu Gerengi, Kerem Savcı, Emine Demir, Canan Yüksel, Doğaç Çağıl

Materials Sciences and Applications Vol.15 No.10，October 23, 2024

DOI: 10.4236/msa.2024.1510031 46 Downloads 437 Views Citations

<...121314 ...>

	customer@scirp.org
	+86 18163351462(WhatsApp)
	1655362766

	Paper Publishing WeChat

All	Title	Abstract	Keywords
DOI	Author	Journal	Affiliation
ISSN	Subject

	customer@scirp.org
	+86 18163351462(WhatsApp)
	1655362766

	Paper Publishing WeChat

Browse Subjects

Publish with us

Home

About SCIRP

Service

Policies