straight turning - Articles - Scientific Research Publishing

Simultaneous Optimization of Correlated Multiple Surface Quality Characteristics of Mild Steel Turned Product (Articles)

Saurav DATTA, Siba Sankar MAHAPATRA

Intelligent Information Management Vol.2 No.1，January 27, 2010

DOI: 10.4236/iim.2010.21004 6,434 Downloads 11,727 Views Citations
Burnout: Drudgery, Repetition, Creativity (Articles)

John Y. Wu, Kuangming Wu

Open Journal of Philosophy Vol.6 No.2，May 12, 2016

DOI: 10.4236/ojpp.2016.62020 2,557 Downloads 4,182 Views Citations
Bounded Turning of an m-th Partial Sum of Modified Caputo’s Fractional Calculus Derivative Operator (Articles)

Ajai P. Terwase, S. Longwap, N. M. Choji

Open Access Library Journal Vol.7 No.3，March 27, 2020

DOI: 10.4236/oalib.1105324 310 Downloads 964 Views Citations
Neck Motion Restriction Negatively Affects Turning Stability in Community-Dwelling Older Adults with and without a History of Falls (Articles)

Luzit Hadad, Herman Avner Cohen, Netta Kram, Zvi Kozol

Advances in Aging Research Vol.11 No.2，March 22, 2022

DOI: 10.4236/aar.2022.112004 318 Downloads 1,758 Views Citations
Method of Estimation of Chemical Compounds of a Solution by Analysis of Video Images of Titration from a Semi-Automatic Approach (Articles)

Marcelin Sandje, Sie Ouattara, Diako Doffou Jerome, Alain Clément

Open Journal of Applied Sciences Vol.12 No.6，June 30, 2022

DOI: 10.4236/ojapps.2022.126073 231 Downloads 1,819 Views Citations
A Quantitative Computational Method for Landslip Orientation of a Body Isolated from Bed Rock in Mountain by Using Spatial Analytic Geometry (Articles)

Chenggui Huang

Applied Mathematics Vol.4 No.8，July 24, 2013

DOI: 10.4236/am.2013.48152 5,932 Downloads 7,496 Views Citations
Document Clustering with Evolutionary Systems through Straight-Line Programs “slp” (Articles)

José Luis Castillo Sequera, José Raúl Fernández del Castillo Diez, León Gonzalez Sotos

Journal of Intelligent Learning Systems and Applications Vol.4 No.4，November 28, 2012

DOI: 10.4236/jilsa.2012.44032 5,351 Downloads 7,858 Views Citations
Transient Hydraulic Performance and Numerical Simulation of a Centrifugal Pump with an Open Impeller during Shutting Down (Articles)

Yuliang Zhang, Zuchao Zhu, Yingzi Jin, Baoling Cui

Open Journal of Fluid Dynamics Vol.2 No.4A，January 2, 2013

DOI: 10.4236/ojfd.2012.24A044 6,200 Downloads 10,105 Views Citations
This article belongs to the Special Issue on Thermophysics and Fluid Science
Riemann Boundary Value Problem of Non-Normal Type on the Infinite Straight Line (Articles)

Lixia Cao

Applied Mathematics Vol.4 No.8，August 7, 2013

DOI: 10.4236/am.2013.48165 5,287 Downloads 7,059 Views Citations
A Sectioning Technique for Extraction of Impacted Third Molar by Using a Straight Handpiece and Carbide Bur: Case Report (Articles)

Ikuya Miyamoto, Takeshi Kaneuji, Kokuryo Shinya, Hiroki Tsurushima, Izumi Yoshioka

Open Journal of Stomatology Vol.5 No.12，December 8, 2015

DOI: 10.4236/ojst.2015.512035 8,489 Downloads 12,443 Views Citations
On the Existence of Non-Intersecting Straight Lines on the Plane (Articles)

Andrew Chubykalo, Sergey Artekha

Journal of Modern Physics Vol.9 No.5，April 10, 2018

DOI: 10.4236/jmp.2018.95052 992 Downloads 2,107 Views Citations
Sectional Dimensions Identification of Metal Profile by Image Processing (Articles)

İlhami M. Orak, Şaban Şeker

Journal of Computer and Communications Vol.11 No.8，August 25, 2023

DOI: 10.4236/jcc.2023.118008 205 Downloads 762 Views Citations
This article belongs to the Special Issue on Image Processing and Machine Learning
Influence of Cutting Speed, Feed Rate and Bulk Texture on the Surface Finish of Nitrogen Alloyed Duplex Stainless Steels during Dry Turning (Articles)

D. Philip Selvaraj, P. Chandramohan

Engineering Vol.2 No.6，July 1, 2010

DOI: 10.4236/eng.2010.26059 9,139 Downloads 16,245 Views Citations
Some Preliminary Metallurgical Studies on Grain Size and Density of Work Material used in Micro Turning Operation (Articles)

A. S. Patil, H. K. Dave, R. Balasubramaniam, K. P. Desai, H. K. Raval

J. of Minerals and Materials Characterization and Eng. Vol.9 No.9，September 20, 2010

DOI: 10.4236/jmmce.2010.99061 7,431 Downloads 9,594 Views Citations
Motor Effects of 1,3-Disubstituted 8-Styrylxanthines as A₁ and A₂ Adenosine-Receptor Antagonists in Rats (Articles)

Ilhuicamina Daniel Limón-Pérez de León, María del Carmen Parra-Cid, Alejandro Muñoz-Zurita, Saúl Alejandro Merino-Contreras, Sara Montiel-Smith, Socorro Meza-Reyes, Gerardo Ramírez-Mejía, Jesús Sandoval-Ramírez

Pharmacology & Pharmacy Vol.4 No.3，June 4, 2013

DOI: 10.4236/pp.2013.43044 4,483 Downloads 6,745 Views Citations
Multi-Objective Optimization Using Genetic Algorithms of Multi-Pass Turning Process (Articles)

Abdelouahhab Jabri, Abdellah El Barkany, Ahmed El Khalfi

Engineering Vol.5 No.7，July 15, 2013

DOI: 10.4236/eng.2013.57072 5,920 Downloads 9,948 Views Citations
Detection of Approximate Potential Trend Turning Points in Temperature Time Series (1941-2010) for Asansol Weather Observation Station, West Bengal, India (Articles)

Soumendu Chatterjee, Dipak Bisai, Ansar Khan

Atmospheric and Climate Sciences Vol.4 No.1，January 9, 2014

DOI: 10.4236/acs.2014.41009 5,330 Downloads 8,446 Views Citations
Effect of Machining Parameters on Tool Wear and Nodal Temperature in Hard Turning of AISI D3 Steel (Articles)

Varaprasad Bhemuni, Srinivasa Rao Chelamalasetti, Siva Prasad Kondapalli

Open Access Library Journal Vol.1 No.6，September 16, 2014

DOI: 10.4236/oalib.1100627 1,521 Downloads 2,602 Views Citations
Determining the Effect of Cutting Fluids on Surface Roughness in Turning AISI 1330 Alloy Steel Using Taguchi Method (Articles)

Onyemachi Joachim Onuoha, James Oseni Abu, Sunday Albert Lawal, Edeki Mudiare, Michael Bolaji Adeyemi

Modern Mechanical Engineering Vol.6 No.2，May 5, 2016

DOI: 10.4236/mme.2016.62006 4,019 Downloads 7,275 Views Citations
Experimentation on Tool Wear and Surface Roughness in AISI D2 Steel Turning with WC Insert (Articles)

N. López-Luiz, O. Jiménez Alemán, F. Alvarado Hernández, M. Montoya Dávila, V. H. Baltazar-Hernández

Modern Mechanical Engineering Vol.8 No.3，August 29, 2018

DOI: 10.4236/mme.2018.83014 1,352 Downloads 3,525 Views Citations

<12 3 ...>

	customer@scirp.org
	+86 18163351462(WhatsApp)
	1655362766

	Paper Publishing WeChat

All	Title	Abstract	Keywords
DOI	Author	Journal	Affiliation
ISSN	Subject

	customer@scirp.org
	+86 18163351462(WhatsApp)
	1655362766

	Paper Publishing WeChat

Browse Subjects

Publish with us

Home

About SCIRP

Service

Policies