Taguchi Robust Design Method - Articles - Scientific Research Publishing

Investigation and Optimization of Sn/Gr Lubricants Effects on Cold Extrudability of Fe-TiC Nanocomposite Using Taguchi Robust Design Method (Articles)

Seyed Abdolkarim Sajjadi, Seyed Mojtaba Zebarjad, Nasrin Sasani, Heydar Khadivi, Behrooz Naderi

Engineering Vol.3 No.7，July 20, 2011

DOI: 10.4236/eng.2011.37083 4,574 Downloads 8,034 Views Citations
Simultaneous Optimization of Correlated Multiple Surface Quality Characteristics of Mild Steel Turned Product (Articles)

Saurav DATTA, Siba Sankar MAHAPATRA

Intelligent Information Management Vol.2 No.1，January 27, 2010

DOI: 10.4236/iim.2010.21004 6,306 Downloads 11,438 Views Citations
Process Window Determination for Biofiltration by the Taguchi Method (Articles)

Man Chung Law, Hong Chua, Ka Po Cheng, Chi Wai Kan

Journal of Water Resource and Protection Vol.4 No.10，October 30, 2012

DOI: 10.4236/jwarp.2012.410095 3,629 Downloads 5,510 Views Citations
A Systematic Framework of Equipment Maintenance and Service with Application to Wire Bonder (Articles)

Ren-Jung Chang, Yu-Tsang Hsieh, Eric Chang

iBusiness Vol.2 No.1，March 26, 2010

DOI: 10.4236/ib.2010.21003 7,250 Downloads 11,642 Views Citations
Robust Optimum Design of Thrust Hydrodynamic Bearings for Hard Disk Drives (Articles)

Hiromu Hashimoto, Yuta Sunami

Applied Mathematics Vol.3 No.10A，November 1, 2012

DOI: 10.4236/am.2012.330193 6,632 Downloads 12,791 Views Citations
This article belongs to the Special Issue on Optimization
The Method for Optimum Design of Water Rocket Flight Stability Performance Conditions Using CAE with T Method and Robust Parameter Design (Articles)

Eiji Toma, Yoshihiro Ito

Journal of Applied Mathematics and Physics Vol.9 No.11，November 8, 2021

DOI: 10.4236/jamp.2021.911172 1,522 Downloads 4,690 Views Citations
Selection of Best Materials and Parametric Optimization of Solar Parabolic Collector Using Fuzzy Logic (Articles)

Sri P. Mohana Reddy, Pathi Venkataramaiah, Devuru Vishnu Vardhan Reddy

Energy and Power Engineering Vol.6 No.14，December 12, 2014

DOI: 10.4236/epe.2014.614046 3,852 Downloads 5,397 Views Citations
Negative Imaginary Approached High Performance Robust Resonant Controller Design for Single-Phase Islanded Microgrid and Its Voltage Observation on Different Load Condition (Articles)

Arnob Kumar Bairagi, Ahasan Habib, Rakib Rahman, Motiur Rahman, Moniruzzaman Jewel

Intelligent Control and Automation Vol.9 No.2，May 30, 2018

DOI: 10.4236/ica.2018.92004 885 Downloads 1,837 Views Citations
Taguchi Optimization of Process Parameters in Friction Stir Welding of 6061 Aluminum Alloy: A Review and Case Study (Articles)

Mohamadreza Nourani, Abbas S. Milani, Spiro Yannacopoulos

Engineering Vol.3 No.2，March 18, 2011

DOI: 10.4236/eng.2011.32017 12,381 Downloads 26,486 Views Citations
Dry Sliding Wear Behaviour of Aluminium/Be₃Al₂(SiO₃)₆ Composite Using Taguchi Method (Articles)

H. B. Bhaskar, Abdul Sharief

J. of Minerals and Materials Characterization and Eng. Vol.11 No.7，July 25, 2012

DOI: 10.4236/jmmce.2012.117052 5,720 Downloads 8,501 Views Citations
An Application of the Taguchi Method (Robust Design) to Environmental Engineering: Evaluating Advanced Oxidative Processes in Polyester-Resin Wastewater Treatment (Articles)

Messias Borges Silva, Livia Melo Carneiro, João Paulo Alves Silva, Ivy dos Santos Oliveira, Hélcio José Izário Filho, Carlos Roberto de Oliveira Almeida

American Journal of Analytical Chemistry Vol.5 No.13，September 19, 2014

DOI: 10.4236/ajac.2014.513092 6,651 Downloads 9,063 Views Citations
Optimization of Carburized UNS G10170 Steel Process Parameters Using Taguchi Approach and Response Surface Model (RSM) (Articles)

Olawale Samuel Fatoba, Olaitan Lukman Akanji, Abiodun Samson Aasa

J. of Minerals and Materials Characterization and Eng. Vol.2 No.6，November 10, 2014

DOI: 10.4236/jmmce.2014.26058 4,413 Downloads 5,938 Views Citations
Reduction of Undercuts in Fillet Welded Joints Using Taguchi Optimization Method (Articles)

Joseph Achebo, Sule Salisu

J. of Minerals and Materials Characterization and Eng. Vol.3 No.3，May 12, 2015

DOI: 10.4236/jmmce.2015.33020 4,415 Downloads 5,270 Views Citations
Determining the Effect of Cutting Fluids on Surface Roughness in Turning AISI 1330 Alloy Steel Using Taguchi Method (Articles)

Onyemachi Joachim Onuoha, James Oseni Abu, Sunday Albert Lawal, Edeki Mudiare, Michael Bolaji Adeyemi

Modern Mechanical Engineering Vol.6 No.2，May 5, 2016

DOI: 10.4236/mme.2016.62006 3,914 Downloads 6,844 Views Citations
Optimization of Process Parameter for Sawdust/Recycled Polyethylene Composites (Articles)

Clement U. Atuanya, Chizoba M. Obele

J. of Minerals and Materials Characterization and Eng. Vol.4 No.4，July 29, 2016

DOI: 10.4236/jmmce.2016.44024 2,098 Downloads 3,255 Views Citations
Experimentation on Tool Wear and Surface Roughness in AISI D2 Steel Turning with WC Insert (Articles)

N. López-Luiz, O. Jiménez Alemán, F. Alvarado Hernández, M. Montoya Dávila, V. H. Baltazar-Hernández

Modern Mechanical Engineering Vol.8 No.3，August 29, 2018

DOI: 10.4236/mme.2018.83014 1,272 Downloads 3,237 Views Citations
Retro-Reflective Fiber Optic Displacement Sensor for Performance Optimization Using Taguchi Method (Articles)

Supriya S. Patil, A. D. Shaligram

Journal of Sensor Technology Vol.10 No.1，March 31, 2020

DOI: 10.4236/jst.2020.101001 637 Downloads 1,610 Views Citations
A Novel Statistical Analysis for Residual Stress in Injection Molding (Articles)

Faisal Alkaabneh, Mahmoud Barghash, Yousef Abdullat

American Journal of Operations Research Vol.6 No.1，January 29, 2016

DOI: 10.4236/ajor.2016.61012 4,530 Downloads 6,124 Views Citations
Optimization by the Taguchi Method of a Robust Synthesis Protocol of Calcium Carbonate Phosphate (Articles)

Mohamed Nohair, Meryem Nini, Hassan Chaair, Omar Ait Layachi, ElMaati Khoumri, Mohssine ElMarrakchi, Abdelhake ElBrouzi

Journal of Materials Science and Chemical Engineering Vol.11 No.7，July 31, 2023

DOI: 10.4236/msce.2023.117006 146 Downloads 751 Views Citations
Robust Sensitivity Design Optimization to Generalized Systems-Based Theoretical Kinematic Inverse/Regular Wedge Cam Theory for Three-Point Diametral Self-Centering Motion (Articles)

Shawn P. Guillory, Alan A. Barhorst, Jim Lee, Raju Gottumukkala, Jonathan R. Raush, Terrence L. Chambers

Journal of Applied Mathematics and Physics Vol.13 No.4，April 27, 2025

DOI: 10.4236/jamp.2025.134085 17 Downloads 107 Views Citations

<12 3 ...>

	customer@scirp.org
	+86 18163351462(WhatsApp)
	1655362766

	Paper Publishing WeChat

All	Title	Abstract	Keywords
DOI	Author	Journal	Affiliation
ISSN	Subject

	customer@scirp.org
	+86 18163351462(WhatsApp)
	1655362766

	Paper Publishing WeChat

Browse Subjects

Publish with us

Home

About SCIRP

Service

Policies