[1]
|
S. M. Gaytan, L. E. Murr, D. A. Ramirez, B. I. Machado, E. Martinez, D. H. Hernandez, J. L. Martinez, F. Medina and R. B. Wicker, “A TEM Study of Cobalt-Base Alloy Prototypes Fabricated by EBM,” Materials Science and Applications, Vol. 2, No. 5, 2011, pp. 355-363.
doi:10.4236/msa.2011.25046
|
[2]
|
L. E. Murr, E. Martinez, S. M. Gaytan and D. A. Ramirez, “Contributions of Light Optical Microscopy to Contemporary Materials Characterization: The New Directional Solidification,” Metallography, Microstructure and Analysis, Vol. 1, No. 1, 2012. doi:10.1007/s13632-011-0002-8
|
[3]
|
L. E. Murr, S. M. Gaytan, D. A. Ramirez, E. Martinez, J. Hernandez, K. N. Amato, P. W. Shindo, F. R. Medina and R. B. Wicker, “Metal Fabrication by Additive Manufacturing Using Laser and Electron Beam Melting Technologies,” Journal of Materials Science and Technology, Vol. 28, No. 1, 2012, pp. 1-14.
doi:10.1016/S1005-0302(12)60016-4
|
[4]
|
L. Thijs, F. Verhaeghe, T. Craeghs, J. Van Humbeeck, and J.-P. Kruth, “A Study of the Microstructural Evolution During Selective Laser Melting of Ti-6Al-4V,” Acta Materialia, Vol. 58, No. 9, 2010, pp. 3303-3312.
doi:10.1016/j.actamat.2010.02.004
|
[5]
|
L. E. Murr, S. A. Quinones, S. M. Gaytan, M. I. Lopez, A. Rodela, E. Y. Martinez, D. H. Hernandez, E. Martinez, F. Medina and R. B. Wicker, “Microstructure and Mechanical Behavior of Ti-6Al-4V for Biomedical Applications Produced by Rapid-Layer Manufacturing,” Journal of Mechanical Behavior of Biomedical Materials, Vol. 2, No. 1, 2009, pp. 20-32. doi:10.1016/j.jmbbm.2008.05.004
|
[6]
|
S. M. Gaytan, L. E. Murr, F. Medina, E. Martinez, M. I. Lopez and R. B. Wicker, “Advanced Metal Powder-Based Manufacturing of Complex Components by Electron Beam Melting,” Materials Technology: Advanced Performance Materials, Vol. 24, No. 3, 2009, pp. 180-190.
|
[7]
|
L. J. Gibson and M. F. Ashby, “The Mechanics of ThreeDimensional Cellular Materials,” Proceedings of the Royal Society, Vol. 382, No. 1782, 1982, pp. 43-59.
doi:10.1098/rspa.1982.0088
|
[8]
|
L. E. Murr, S. M. Gaytan, F. Medina, H. Lopez, E. Martinez, B. I. Machado, D. H. Hernandez, L. Martinez, M. I. Lopez, L. B. Wicker and J. Bracke, “Next Generation Biomedical Implants Using Additive Manufacturing of Complex Cellular and Functional Mesh Arrays,” Philosophical Transactions of the Royal Society A, Vol. 368, No. 1917, 2010, pp. 1999-2032.
doi:10.1098/rsta.2010.0010
|
[9]
|
L. E. Murr, K. N. Amato, S. J. Li, Y-X Tian, X-Y Cheng, S. M. Gaytan, E. Martinez, P. W. Shindo, F. Medina and R. B. Wicker, “Microstructure and Mechanical Properties of Open-Cellular Biomaterials Prototypes for Total Knee Replacement Implants Fabricated by Electron Beam Melting,” Journal of Mechanical Behavior of Biomedical Materials, Vol. 4, No. 7, 2011, pp. 1396-1411.
doi:10.1016/j.jmbbm.2011.05.010
|