[1]
|
J. L. Nevins and D. E. Whitney, “Concurrent design of product and processes,” McGraw-Hill, New York, 1989.
|
[2]
|
U. Rembold, C. Blume, and R. Dillmann, “Computer- integrated manufacturing technology and systems,” Mar-cel Dekker, New York, 1985.
|
[3]
|
S. S. F. Smith, “Using multiple genetic operators to re-duce premature convergence in genetic assembly plan-ning,” Computers in Industry, Vol. 54, Iss. 1, pp. 35–49, May 2004.
|
[4]
|
C. M. Eastman, “The design of assembly,” SAE Techni-cal Paper Series 0148-7191/81/0223-0197, 1981.
|
[5]
|
H. Ko and K. Lee, “Automatic assembly procedure gen-eration from mating conditions,” Computer Aided Design, Vol. 19, pp. 3–10, 1987.
|
[6]
|
L. S. Homen De Mello, and A. C. Sanderson, “Represen-tations of mechanical assembly sequences,” IEEE Trans-actions on Robotics and Automation, Vol. 7, No. 2, pp. 211–227, 1991.
|
[7]
|
D. F. Baldwin, T. E. Abell, M. C. M. Lui, T. L. D. Fazio, and D. E. Whitney, “An integrated computer aid for gen-erating and evaluating assembly sequences for mechani-cal products,” IEEE International Conference on Robotics and Automation, Vo1. 7, No. 1, pp. 78–94, 1991.
|
[8]
|
K. W. Lyons, V. N. Rajan, and R. Sreerangam, “Repre-sentations and methodologies for Assembly Modeling,” NIST Int. Rep., Gaithersburg, MD, 1996.
|
[9]
|
J. J. Shah and M. T. Rogers, “Assembly modeling as an extension of feature based design,” Recent Trends in En-gineering Design, Vol. 3, No. 3 & 4, pp. 218–237, 1993.
|
[10]
|
C. Mascle, “Features modeling in assembly sequence and resource planning,” In Proceedings IEEE International Symposium on Assembly and Task Planning, Pittsburgh, PA, pp. 232–237, 1995.
|
[11]
|
R. Anantha, G. A. Kramer, and R.H. Crawford, “Assem-bly modeling by geometric constraint satisfaction,” Co- mputer Aided Design, Vol. 28, No. 9, pp. 707–722, 1996.
|
[12]
|
R. B. Gottipolu and K. Ghosh, “An Integrated approach to the generation of assembly sequences,” International Journal of Computer Applications in Technology, Vol. 8, No. 3–4, pp. 125–138, 1995.
|
[13]
|
R. B. Gottipolu and K. Ghosh, “A simplified and efficient representation for evaluation and selection of assembly sequences,” Computers in Industry, Vol. 50, pp. 251–264, 2003.
|
[14]
|
L. Laperriere and H. A. ElMaraghy, “Assembly sequen- ces planning for simultaneous engineering applications,” International Journal of Advanced Manufacturing Tech-nology, Vol. 9, pp. 231–244, 1994.
|
[15]
|
A. C. Lin and T. C. Chang, “3D MAPS: Three dimen-sional mechanical assembly planning system,” Journal of Manufacturing Systems, Vol. 12, No. 6, pp. 437–456, 1993.
|
[16]
|
R. J. Linn and H. Liu, “An automatic assembly liaison extraction method and assembly liaison model,” IIE Tr- ansactions, Vol. 31, pp. 353–363, 1996.
|
[17]
|
R. S. Chen, K. Y. Lu, and P. H. Tai, “Optimizing assem-bly planning through a three-stage integrated approach,” International Journal of Production Economics, Vol. 88, pp. 243–256, 2004.
|
[18]
|
J. S. Kim, K. S. Kim, J. Y. Lee, and J. H. Jeong, “Gen-eration of assembly models from kinematic constraints,” International Journal of Advanced Manufacturing Tech-nology, Vol. 26, pp. 131–137, 2005.
|
[19]
|
R. Sudarsan, Y. H. Han, S. Foufou, S. C. Feng, U. Roy, F. Wang, R. D. Sriram, and K. Lyons, “A model for captur-ing product assembly information,” Journal of Computing and Information Science in Engineering, Vol. 6, No. 1, pp. 11–21, 2006.
|
[20]
|
T. Dong, R. Tong, Ling, and J. Dong, “A Knowledge based approach to assembly sequence planning,” Interna-tional Journal of Advanced Manufacturing Technology, Vol. 32, pp. 1232–1244, 2007.
|
[21]
|
H. Wang, D. Xiang, G. Duan, and L. Zhang, “Assembly planning based on semantic modelling approach,” Com-puters in Industry, Vol. 58, pp. 227–239, 2007.
|