Experimental Study on Latent Heat Storage Characteristics of W/O Emulsion by Ultrasonic Wave Impression

Abstract

The flowable latent heat storage material like Oil/Water type emulsion, microencapsulated latent heat material-water mixture or ice slurry, etc., is enabled to transport the latent heat in a pipe. Supercooling phenomenon of the dispersed latent heat storage material in continuous phase is obstructed by a latent heat storage. The latent heat storage rates of dispersed waterdrops in W/O (Water/Oil) emulsion are investigated experimentally in this study. The waterdrops in emulsion have the diameter within 3 - 25 μm, the averaged diameter of waterdrops is 7.3 μm and the standard deviation is 2.9 μm. Supercooling release of waterdrops in emulsion is examined by short time impressing of the ultrasonic. The direct contact heat exchange method is chosen as the phase change rate evaluation of waterdrops in W/O emulsion. The supercooled temperature is set as parameters of this study. The previous obtained experimental result, as the condition without impressing ultrasonic wave, showed that the 35 K or more degree from melting point brings 100% latent heat storage rate of W/O emulsion. It is clarified that it is possible to reduce 20 K of supercooling degree by impressing the ultrasonic.

Share and Cite:

S. Morita, Y. Hayamizu, A. Horibe, N. Haruki, H. Inaba and I. Higashi, "Experimental Study on Latent Heat Storage Characteristics of W/O Emulsion by Ultrasonic Wave Impression," Open Journal of Fluid Dynamics, Vol. 3 No. 2A, 2013, pp. 48-54. doi: 10.4236/ojfd.2013.32A008.

Conflicts of Interest

The authors declare no conflicts of interest.

References

[1] H. Inaba and S.-I. Morita, “Fundamental Study of Cold Heat Storage System of O/W-Type Emulsion Having Cold Latent Heat Dispersion Material (2nd Report, Flow and Cold Heat-Storage Characteristics of Emulsion in a Coiled Double-Tube Heat Exchanger),” JSME International Journal Series B: Fluids and Thermal Engineering, Vol. 60, No. 572, 1994, pp. 1422-1429. doi:10.1299/kikaib.60.1422
[2] H. Inaba, A. Horibe, H. Tsukamoto and M.-J. Kim, “Heat Storage Characteristics of Latent Microcapsules Using Hot Air Bubbles by Direct Contact Heat Exchange,” JSME International Journal Series B: Fluids and Thermal Engineering, Vol. 66, No. 645, 2000, pp. 1487-1494. doi:10.1299/kikaib.66.1487
[3] H. Kumano, A. Saito, S. Okawa and Y. Goto, “Study on Fundamental Characteristics of TBAB Hydrate Slurry,” JSME International Journal Series B: Fluids and Thermal Engineering, Vol. 72, No. 724, 2006, pp. 3089-3095.
[4] J. P. Bedecarrats, J. Castaing-Lasvignottes, F. Strub and J. P. Dumas, “Study of a Phase Change Energy Storage Using Spherical Capsules. Part 1 Experimental Results,” Energy Conversion and Management, Vol. 50, No. 10, 2009, pp. 2527-2536. doi:10.1016/j.enconman.2009.06.004
[5] J. P. Bedecarrats, J. Castaing-Lasvignottes, F. Strub and J. P. Dumas, “Study of a Phase Change Energy Storage Using Spherical Capsules. Part 2 Numerical Modeling,” Energy Conversion and Management, Vol. 50, No. 10, 2009, pp. 2537-2546. doi:10.1016/j.enconman.2009.06.003
[6] R. Yang, H. Xu and Y. P. Zhang, “Preparation, Physical Property and Thermal Physical Property of Phase Change Microcapsule Slurry and Phase Change Emulsion,” Solar Energy Materials & Solar Cells, Vol. 80, No. 4, 2003, pp. 405-416. doi:10.1016/j.solmat.2003.08.005
[7] A. Saito, Y. Utaka, A. Tamaki, K. Matsuzawa and S. Kajikawa, “On the Freezing Process with Supercooling (Measurements of the Heat Transfer Surface Effects on the Maximum Degree of Supercooling, and the Statistical Analyses),” JSME International Journal Series B: Fluids and Thermal Engineering, Vol. 54, No. 502, 1988, pp. 1439-1466. doi:10.1299/kikaib.54.1439
[8] S. Okawa, A. Saito and T. Harada, “Experimental Study on the Effect of the Electric Field on the Freezing of the Supercooled Water,” Transactions of the Japan Society of Refrigerating and Air Conditioning Engineers, Vol. 14, No. 1, 1997, pp. 47-55.
[9] T. Inada, X. Zhang, A. Yabe, M. Tanaka and Y. Kozawa, “Active Control of Freezing of Supercooled Water by Ultrasonic Vibratio,” JSME International Journal Series B: Fluids and Thermal Engineering, Vol. 65, No. 683, 1999, pp. 3455-3460. doi:10.1299/kikaib.65.3455
[10] H. Inaba, K. Takeya and T. Asano, “Study on Ice Formation in Still Supercoold Water with Ice Nucleating Substance,” Transactions of the Japan Society of Refrigerating and Air Conditioning Engineers, Vol. 11, No. 3, 1994, pp. 277-287.
[11] T. Hozumi, A. Saito and S. Okawa, “Study on the Mechanism of the Freezing of the Supercooled Water under the Effect of the Ultrasonic Wave,” Transactions of the Japan Society of Refrigerating and Air Conditioning Engineers, Vol. 16, No. 2, 1999, pp. 147-156.
[12] T. Inada, T. Koyama, F. Goto and T. Seto, “Loss of Ice-Nucleating Activity of Silver Iodide by Synthetic Polymers,” Proceedings of 48th National Heat Transfer Symposium of Japan, Okayama, 1-3 June 2011, pp. 443-444.
[13] H. Inaba and S.-I. Morita, “Fundamental Study of Cold Heat Storage System of O/W-Type Emulsion Having Cold Latent Heat Dispersion Material (3rd Report, Cold Heat-Release Characteristics of Emulsion by Air-Emulsion Direct-Contact Heat Exchange Method),” JSME International Journal Series B: Fluids and Thermal Engineering, Vol. 61, No. 583, 1995, pp. 1149-1156. doi:10.1299/kikaib.61.1149
[14] S. Aoyama and H. Inaba, “Fundamental Study on Cold Energy Release by Direct Contact Heat Exchange between Ice Water Slurry and Hot Air,” JSME International Journal Series B: Fluids and Thermal Engineering, Vol. 67, No. 654, 2001, pp. 514-521. doi:10.1299/kikaib.67.514
[15] P. Schalbart, M. Kawaji and K. Fumoto, “Formation of Tetradecane Nanoemulsion by Low-Energy Emulsification Methods,” International Journal of Refrigeration, Vol. 33, No. 8, 2010, pp. 1612-1624. doi:10.1016/j.ijrefrig.2010.09.002
[16] S.-I. Morita, Y. Hayamizu, A. Horibe, N. Haruki and H. Inaba, “Experimental Study on Latent Heat Storage Characteristics of W/O Emulsion,” Journal of Thermal Science, Vol. 22, No. 2, 2013, pp. 145-151. doi:10.1007/s11630-013-0605-2
[17] “Data Sheet of Silicone Oil TSF451-10,” Momentive Performance Materials Holdings Inc., Columbus, 2007, pp. 4-11.
[18] The Japan Society of Mechanical Engineering, “JSME Data Book Heat Transfer,” 5th Edition, Maruzen Company, Limited, Tokyo, 2009, 291 pp.

Copyright © 2024 by authors and Scientific Research Publishing Inc.

Creative Commons License

This work and the related PDF file are licensed under a Creative Commons Attribution 4.0 International License.