Share This Article:

Recognition of Bragg Wavelength Disturbed by Time Delay of Fiber Length in Prepositive Tunable Filter

Abstract Full-Text HTML Download Download as PDF (Size:303KB) PP. 232-235
DOI: 10.4236/opj.2013.32B054    2,558 Downloads   3,396 Views  

ABSTRACT

The wavelength shift in fiber Bragg grating does not depend directly on the total light levels, losses in the connecting fibers and couplers, or source power. However, if the tunable Fabry-Perot filter is place on the end of incident fiber, the detected time delay of modulation light is occurred due to the unmatch between the scanning time and light transmission time in the transmission fiber. Consequently, the detected peak wavelength shifts with the length of transmission fiber. Thus, the peak wavelength shift effect of Bragg reflective light transmitted in fiber with different fiber length can be obvious in the demodulator with a prepositive tunable Fabry-Perot filter. The experiment indicates the shift rates of 0.109 - 0.126 nm/km increase approximately linearly with the original peak wavelength of 1532.917 - 1560.300 nm at the fiber length of 0 - 6 km. To certify the consistency of measurement data, the criterion correction is introduced. By using the differential method of two fiber Bragg gratings with an optical path, the differential worth is compensated from the disturbance modulated by the time delay of fiber length.

Conflicts of Interest

The authors declare no conflicts of interest.

Cite this paper

C. Li, X. Chao, Y. Li, T. Xie, Z. Zhao and X. Xiong, "Recognition of Bragg Wavelength Disturbed by Time Delay of Fiber Length in Prepositive Tunable Filter," Optics and Photonics Journal, Vol. 3 No. 2B, 2013, pp. 232-235. doi: 10.4236/opj.2013.32B054.

References

[1] K. O. Hill, Y. Fujii, D. C. Johnson and B.S. Kawasaki, “Photosensitivity in Optical Fiber Waveguides: Application to Reflection Filter Fabrication,” Applied Physics Letters, Vol. 32, No. 10, 1978, pp. 647-649. doi:10.1063/1.89881
[2] G. Meltz, W. W. Morey, W. H. Glenn and J. D. Farina, “In-Fiber Bragg-Grating Temperature and Strain Sensors, Instrumentation in the Aerospace Industry,” Vol. 34, No.2, 1988, pp. 239-242.
[3] A. D. Kersey, M. A. Davis, H. J. Patrick, M. LeBlanc, K. P. Koo, C. G. Askins, M. A. Putnam and E. Joseph Friebele, “Fiber grating sensors,” IEEE Journal of Lightwave Technology, Vol. 15, No. 8, 1997, pp. 1442-1463. doi:10.1109/50.618377
[4] T. Erdogan, “Fiber Grating Spectra,” IEEE Journal of Lightwave Technology, Vol. 15, No. 8, 1997, pp. 1277-1294. doi:10.1109/50.618322
[5] C. Li, Y. M. Zhang, Y. G. Zhao and L. J. Li, “Fiber grating: Principles, Techniques and Applications,” Science Press, Beijing, 2005.
[6] H. G. Limberger, P. Y. Fonjallaz and R. P. Salathe, “Spectral Characterisation of Photoinduced High Efficient Bragg Gratings in Standard Telecommunication Fibres,” Electronics Letters, Vol. 29, No. 1, 1993, pp. 47-49. doi:10.1049/el:19930031
[7] V. Gaillarda, X. Aduriza, N. Daherab, et al., “Local and Spectral Characterization of Optical Fibers and Fiber Bragg Gratings with Low Coherence Interferometry,” Fiber and Integrated Optics, Vol. 28, No. 1, 2008, pp. 108-126. doi:10.1080/01468030802272575
[8] Y. L. Lo, J. F. Huang, P. H. Sung and M. D. Yang, “Intensity Effects in Bragg Grating Sensors Scanned by a Tunable Filter,” Measurement Science and Technology, Vol. 11, No. 10, 2000, pp. 1456-1462. doi:10.1088/0957-0233/11/10/306

  
comments powered by Disqus

Copyright © 2018 by authors and Scientific Research Publishing Inc.

Creative Commons License

This work and the related PDF file are licensed under a Creative Commons Attribution 4.0 International License.