Share This Article:

Resonant Length Formulations for Dual Band Slot Cut Equilateral Triangular Microstrip Antennas

Abstract Full-Text HTML XML Download Download as PDF (Size:1295KB) PP. 55-63
DOI: 10.4236/wet.2010.12009    6,479 Downloads   11,805 Views   Citations

ABSTRACT

The dual band equilateral triangular microstrip antennas are realized by cutting the slots of either quarter wave or half wave in length, inside the patch. In this design, however these simpler approximations of slot length against the frequency do not give closer results for different slot lengths and there positions inside the patch. In this paper, the modal variations of slot cut patch antennas over wide frequency range are studied. It is observed that the slot does not introduce any mode but reduces the higher order mode resonance frequency of the patch and along with the fundamental mode realizes dual band response. The formulations of the resonant length for the mode introduce by the slots in these antennas are proposed. The resonance frequencies calculated using proposed formulations agree well with the simulated results with an error of less than 5%.

Conflicts of Interest

The authors declare no conflicts of interest.

Cite this paper

A. Deshmukh and K. Ray, "Resonant Length Formulations for Dual Band Slot Cut Equilateral Triangular Microstrip Antennas," Wireless Engineering and Technology, Vol. 1 No. 2, 2010, pp. 55-63. doi: 10.4236/wet.2010.12009.

References

[1] G. Kumar and K. P. Ray, “Broadband Microstrip Antenna,” Artech House, Norwood, 2003.
[2] R. Garg, P. Bhartia, I. Bahl and A. Ittipiboon, “Microstrip Antenna Design Handbook,” Artech House, Norwood, 2001.
[3] K. P. Ray and D. D. Krishna, “Compact Dual Band Suspended Semicircular Microstrip Antenna with Half U-Slot,” Microwave & Optical Technology Letters, Vol. 48, No. 10, 2006, pp. 2021-2024.
[4] K. L. Wong, “Compact and Broadband Microstrip Antennas,” John Wiley & sons, Inc., New York, USA, 2002.
[5] A. E. Daniel and R. K. Shevgaonkar, “Slot-Loaded Rectangular Microstrip Antenna for Tunable Dual-Band Operation,” Microwave & Optical Technology Letters, Vol. 44, No. 5, March 2005, pp. 441-444.
[6] J. H. Lu, “Single Feed Dual Frequency Rectangular Microstrip Antenna with Pair Step Slots,” Electronics Letters, Vol. 35, No. 5, 1999, pp. 354-355.
[7] A. A. Deshmukh and G. Kumar, “Even Mode Multi-Port Network Model for Slotted Dual Band Rectangular Microstrip Antennas,” Microwave & Optical Technology Letters, Vol. 48, No. 4, 2006, pp. 798-804.
[8] A. A. Deshmukh and K. P. Ray, “Multi-Band Equilateral Triangular Microstrip Antennas,” Proceedings of Recent Advances in Microwave Theory and Applications, Jaipur, 21-24 November 2008.
[9] J. B. Knorr and J. Saenz, “End Effect in a Shorted Slot,” IEEE Transactions on Microwave Theory & Techniques, September 1973, pp. 579-580.
[10] IE3D 12.1, Zeland Software, Freemont, 2004。
[11] J. Y. Sze and K. L. Wong, “Broadband RMSA Using Tooth-Brush Shaped Slots,” Electronics Letters, Vol. 34, No. 23, November 1998, pp. 2186-2187.

  
comments powered by Disqus

Copyright © 2018 by authors and Scientific Research Publishing Inc.

Creative Commons License

This work and the related PDF file are licensed under a Creative Commons Attribution 4.0 International License.