[1]
|
S. Iijima, “Helical Microtubules of Graphite Carbon,” Nature, Vol. 354, No. 7, 1991, pp. 56-58. doi:10.1038/354056a0
|
[2]
|
P. M. Ajayan, L. S. Schadler, C. Giannaris and A. Rubio, “Single Walled Carbon Nanotube Polymer Composites: Strength and Weakness,” Advanced Materials, Vol. 12, No. 10, 2000, pp. 750-753. doi:10.1002/(SICI)1521-4095(200005)12:10<750::AID-ADMA750>3.0.CO;2-6
|
[3]
|
J. P. Lu, “Understanding of Carbon Nano-tubes: From Basic to Applications,” Journal of Physics and Chemistry of Solids, Vol. 58, No. 11, 1997, pp. 1649-1655. doi:10.1016/S0022-3697(97)00045-0
|
[4]
|
M. F. Yu, O. Lourie, M. Dyer, K. Moloni, T. F. Kelly and R. S. Ruoff, “Strength and Breaking Mechanism of Mul-tiwalled Carbon Nanotubes under Tensile Load,” Science, Vol. 287, No. 10, 2000, pp. 637-643. doi:10.1126/science.287.5453.637
|
[5]
|
D. Qian, E. C. Dickey, R. Andrews and T. Rantell, “Load Transfer and Deformation Mechanisms in Carbon Nanotubes-Poly-Styrene Composites,” Applied Physics Letters, Vol. 76, No. 20, 2000, pp. 2868-2670. doi:10.1063/1.126500
|
[6]
|
H. D. Wanger, “Nano Composites: Issues at the Interface,” Materials Today, Vol. 7, No. 11, 2004, pp. 38-42. doi:10.1016/S1369-7021(04)00507-3
|
[7]
|
K. Liao and S. Li, “In-terfacial Characterization of a Carbon Nanotube-Polystrene Composite System,” Applied Physics Letters, Vol. 79, No. 25, 2001, pp. 4225-4232. doi:10.1063/1.1428116
|
[8]
|
K. T. Hsiao, J. Alms and S. G. Advani, “Use of Epoxy /Multiwalled Carbon Nanotubes as Adhesives to Join Graphite Fibre Reinforced Polymer Composites,” Nanotechnology, Vol. 14, No. 8, 2003, pp. 791-793. doi:10.1088/0957-4484/14/7/316
|
[9]
|
F. J. Gojny, M. H. G. Wichmann, U. Koupke, B. Fiedler and K. Schulte, “Carbon Nanotube-Reinforced Epoxy-Composites-Enhanced Stiffness and Fracture Toughness at Low Nanotubes Content,” Composite Science and Technology, Vol. 64, No. 15, 2004, pp. 2363-2371. doi:10.1016/j.compscitech.2004.04.002
|
[10]
|
F. J. Gojny, M. H. G. Wichmann, B. Fiedler and K. Schulte, “Influence of Different Carbon Nanotubes on the Me-chanical Properties of Epoxy Matrix Composites-A Comparative Study,” Composite Science and Technology, Vol. 65, No. 15-16, 2005, pp. 2300-2313. doi:10.1016/j.compscitech.2005.04.021
|
[11]
|
M. H. G. Wichmann, J. Sumfletch, B. Fiedler, F. G. Gojny and K. Schulte, “Multiwall Carbon Nanotube/Epoxy Composites Produced by a Masterbatch Process,” Me-chanics of Composite Materials, Vol. 42, No. 5, 2006, pp. 395-405. doi:10.1007/s11029-006-0050-3
|
[12]
|
J. Zhang and D. Jiang, “Interconnected Multiwalled Carbon Nanotubes Reinforced Polymer-Matrix Composites,” Composite Science and Technology, Vol. 71, No. 4, 2011, pp. 466-470. doi:10.1016/j.compscitech.2010.12.020
|
[13]
|
W. C. Oliver and G. M. Pharr, “An Improved Technique for Determining Hardness and Elastic-Modulus Using Load and Displacement Sensing Indentation Experiments,” Journal of Materials Research, Vol. 7, No. 9, 1992, pp. 1564-1572. doi:10.1557/JMR.1992.1564
|
[14]
|
V. K. Srivastava and B. Harris, “Effect of Particles on Inter-laminar Crack Growth in Cross?Plied Carbon Fibre Epoxy Laminates,” Journal of Materials Science, Vol. 29, No. 2, 1994, 548-553. doi:10.1007/BF01162520
|