[1]
|
K. Nagano, S. Takeda, T. Mochida and K. Shimakura, “Thermal Characteristics of a Direct Heat Exchange System between Granules with Phase Change Material and Air,” Applied Thermal Engineering, Vol. 24, No. 14-15, 2004, pp. 2131-2144.
doi:10.1016/j.applthermaleng.2004.02.004
|
[2]
|
S. S. Gulawani, S. K. Dahikar, C. S. Mathpati, J. B. Joshi, M. S. Shah, C. S. RamaPrasad and D. S. Shukla, “Analysis of Flow Pattern and Heat Transfer in Direct Contact Condensation,” Chemical Engineering Science, Vol. 64, No. 8, 2009, pp. 1719-1738.
doi:10.1016/j.ces.2008.12.020
|
[3]
|
S. B. Geni?, “Direct-Contact Condensation Heat Transfer on Downcommerless Trays for Steam-Water System,” International Journal of Heat and Mass Transfer, Vol. 49, No. 7-8, 2006, pp. 1225-1230.
doi:10.1016/j.ijheatmasstransfer.2005.10.003
|
[4]
|
B. M. Smolsky and G. T. Sergeyev, “Heat and Mass Transfer with Liquid Evaporation,” International Journal of Heat and Mass Transfer, Vol. 5, No. 10, 1962, pp. 1011-1021. doi:10.1016/0017-9310(62)90081-9
|
[5]
|
M. Farid and K. Yacoub, “Performance of Direct Contact Latent Heat Storage Unit,” Solar Energy, Vol. 43, No. 4, 1989, pp. 237-251. doi:10.1016/0038-092X(89)90023-6
|
[6]
|
J. Siqueiros and O. Bonilla, “An Experimental Study of a Three-Phase, Direct-Contact Heat Exchanger,” Applied Thermal Engineering, Vol. 19, No. 5, 1999, pp. 477-493.
doi:10.1016/S1359-4311(98)00068-4
|
[7]
|
M. C. De Andrés, E. Hoo, and F. Zangrando, “Performance of Direct-Contact Heat and Mass Exchangers with Steam-Gas Mixtures at Subatmospheric Pressures,” International Journal of Heat and Mass Transfer, Vol. 39, No. 5, 1996, pp. 965-973.
doi:10.1016/0017-9310(95)00173-5
|
[8]
|
I. Z. Aronov, “Contact Heating Water by Combustion Products of Natural Gas,” Nauka Publishers, Moscow, 1990.
|
[9]
|
J. Mitrovic and K. Stephan, “Mean Fluid Temperatures in Direct Contact Heat Exchangers without Phase Change,” International Journal of Heat and Mass Transfer, Vol. 39, No. 13, 1996, pp. 2745-2750.
doi:10.1016/0017-9310(95)00357-6
|
[10]
|
L. Tadrist, P. Seguin, R. Santini, J. Pantaloni and A. Bricard, “Experimental and Numerical Study of Direct Contact Heat Exchangers,” International Journal of Heat and Mass Transfer, Vol. 28, No. 6, 1985, pp. 1215-1227.
doi:10.1016/0017-9310(85)90129-2
|
[11]
|
H. Belghazi, M. El Ganaoui and J.C. Labbe, “Analytical Solution of Unsteady Heat Conduction in a Two-Layered Material in Imperfect Heat Subjected to a Moving Heat Source,” International Journal of Thermal Sciences, Vol. 49, No. 2, 2010, pp. 311-318.
doi:10.1016/j.ijthermalsci.2009.06.006
|
[12]
|
R. N. Christensen, Q. Liu, and S. G. Talbert, “Computer Modeling of a Direct Contact Condensing Heat Exchanger for Gas Furnaces,” Heat Recovery Systems and CHP, Vol. 14, No. 2, 1994, pp. 195-209.
doi:10.1016/0890-4332(94)90010-8
|
[13]
|
H. Berthiaux, V. Mizonov and V. Zhukov, “Application of the Theory of Markov Chains to Model Different Processes in Particle Technology,” Powder Technology, Vol. 157, Vol. 1-3, 2005, pp. 128-137.
doi:10.1016/j.powtec.2005.05.019
|
[14]
|
V. Mizonov, H. Berthiaux, P. Arlabosse and D. Djerroud, “Application of the Theory of Markov Chains to Model Heat and Mass Transfer between Stochastically Moving Particulate and Gas Flows,” Granular Matter, Vol. 10, No. 4, 2008, pp. 335-340.
doi:10.1007/s10035-008-0094-2
|