[1]
|
V. Khoa and O. Olatunbosun, “A Method for Remote Monitoring of Structural Health Based on the Nonlinear Phenomenon in Dynamic Response of Damaged Structures,” Proceedings of the World Congress on Engineering, London, 2-4 July2007.
|
[2]
|
S. Benfratellol, P. Cacciola, N. Impollonia, A. Masnata and G. Muscolino, “Crack Identification in a Beam by Measure of the Response to White Noise,” Computers & Structures, Vol. 81, No. 18-19, 2006, pp. 1773-1782.
|
[3]
|
A. Saito, M. P. Castanier and C. Pierre, “Estimation and Veering Analysis of Nonlinear Resonant Frequencies of Cracked Plates,” Journal of Sound and Vibration, Vol. 326, No. 3-5, 2009, pp. 725-739.
|
[4]
|
A. Bazoune, “Survey on Modal Frequencies of Centrifugally Stiffened Beams,” The Shock and Vibration Digest, Vol. 37, No. 6, 2005, pp. 449-469.
doi:10.1177/0583102405056752
|
[5]
|
Y. Chou and W. Yeh, “Prediction of Rotating Blade Modes from Measured Non-Rotating Modal Parameters,” Journal of Vibration and Acoustics, Vol. 113, No. 4, October 1991, pp. 423-557.
|
[6]
|
S. Christides and A. Barr, “One-Dimensional Theory of Cracked Bernoulli–EULER Beams,” International Journal of Mechanical Sciences, Vol. 26, No. 11-12, 1984, pp. 639-648. doi:10.1016/0020-7403(84)90017-1
|
[7]
|
M. Shen and C. Pierre, “Natural Modes of Bernoulli– Euler Beams with Symmetric Cracks,” Journal of Sound and Vibration, Vol. 138, No. 1, 1990, pp. 115-134.
doi:10.1016/0022-460X(90)90707-7
|
[8]
|
M. Shen and C. Pierre, “Free Vibrations of Beams with a Single-Edge Crack,” Journal of Sound and Vibration, Vol. 170, No. 2, 1994, pp. 237-259.
doi:10.1006/jsvi.1994.1058
|
[9]
|
T. G. Chondros, A. D. Dimarogonas and J. Yao, “A Continuous Cracked Beam Vibration Theory,” Journal of Sound and Vibration, Vol. 215, No. 1, 1998, pp. 17-34.
doi:10.1006/jsvi.1998.1640
|
[10]
|
P. Gudmundson, “The Dynamic Behavior of Slender Structures with Cross-Sectional Cracks,” Journal of the Mechanics and Physics of Solids, Vol. 31, No. 4, 1983, pp. 329-345. doi:10.1016/0022-5096(83)90003-0
|
[11]
|
S. M. Cheng, A. S. Swamidas, X. J. Wu and W. Wallace, “Vibrational Response of a Beam with a Breathing Crack,” Journal of Sound and Vibration, Vol. 225, No. 1, 1999, pp. 201-208. doi:10.1006/jsvi.1999.2275
|
[12]
|
W. L. Bayissa and N. Haritos, “Experimental Investigation into Vibration Characteristics of a Cracked RCT- Beam,” Melbourne University Private Ltd Report, 2006.
|
[13]
|
S. S. Ki and J. H. Kim, “Rotating Composite Beam with a Breathing Crack,” Composite Structure, Vol. 60, No. 1, 2003, pp. 83-90.
|
[14]
|
T. G. Chondros, A. D. Dimarogonas and J. Yao, “Vibration of a Beam with a Breathing Crack,” Journal of Sound and vibration, Vol. 239, No. 1, 2001, pp. 57-67.
doi:10.1006/jsvi.2000.3156
|
[15]
|
X. S. Andreas and A. Polycarpou, “Measurement and Modeling of Normal Contact Stiffness and Contact Damping at the Meso Scale,” ASME Transactions of the ASME, Vol. 127, February 2005.
|
[16]
|
C. C. Ma and C. H. Huang, “Experimental and Numerical Analysis of Vibrating Cracked Plates at Resonant Frequencies,” Experimental Mechanics, Vol. 41, No. 1, 2001, pp. 8-18. doi:10.1007/BF02323099
|
[17]
|
M. Kulyk, O. Kucher, V. Kharyton, J. Laine and F. Thouverez, “Dynamic Nonlinear Analysis of Cracked Blade,” Journal of Aviation, Vol. 12, No. 3, 2008, pp. 66-79. doi:10.3846/1648-7788.2008.12.66-79
|
[18]
|
S. S. Rao, “The Finite Element Method in Engineering,” Fourth Edition, Elsevier Science & Technology Books, 2004.
|
[19]
|
A. Saito, M. P. Castanier, C. Pierre and O. Poudou, “Efficient Nonlinear Vibration Analysis of the Forced Response of Rotating Cracked Blades,” Journal of Computational and Nonlinear Dynamics, Vol. 4, No. 1, January 2009, pp. 011005.
|
[20]
|
ANSYS, “Engineering Analysis System Theoretical Manual,” http://www. Ansys. Com. Ansys, Version 11, 2007.
|
[21]
|
P. Cacciola, N. Impollonia and G. Muscolino, “Crack Detection and Location in a Damaged Beam Vibrating under White Noise,” Computers & Structures, Vol. 81, No. 18-19, 2003, pp. 1773-1782.
doi:10.1016/S0045-7949(03)00201-3
|