[1]
|
Advances in Plasma Treatment of Textile Surfaces
2024
DOI:10.1016/B978-0-443-19079-7.00006-3
|
|
|
[2]
|
Nano-engineered prepreg manufacturing: control of capillary rise of resin into VACNTs’ forests
Carbon Letters,
2023
DOI:10.1007/s42823-023-00495-2
|
|
|
[3]
|
Nano-engineered prepreg manufacturing: control of capillary rise of resin into VACNTs’ forests
Carbon Letters,
2023
DOI:10.1007/s42823-023-00495-2
|
|
|
[4]
|
A porous capillary tube approach for textile saturation
Composites Science and Technology,
2022
DOI:10.1016/j.compscitech.2022.109450
|
|
|
[5]
|
Characterising microstructural organisation in unidirectional composites
Composites Science and Technology,
2021
DOI:10.1016/j.compscitech.2021.109030
|
|
|
[6]
|
In-operando dynamic visualization of flow through porous preforms based on X-ray phase contrast imaging
Composites Part A: Applied Science and Manufacturing,
2021
DOI:10.1016/j.compositesa.2021.106560
|
|
|
[7]
|
Flow-speed-controlled quality optimisation for one-shot-hybrid RTM parts
Advanced Manufacturing: Polymer & Composites Science,
2020
DOI:10.1080/20550340.2020.1722910
|
|
|
[8]
|
Development of the automated software and device for determination of wicking in textiles using open-source tools
PLOS ONE,
2020
DOI:10.1371/journal.pone.0241665
|
|
|
[9]
|
Assessment of capillary phenomena in liquid composite molding
Composites Part A: Applied Science and Manufacturing,
2019
DOI:10.1016/j.compositesa.2019.02.018
|
|
|
[10]
|
Capillary Characterization of Fibrous Reinforcement and Optimization of Injection Strategy in Resin Transfer Molding
Journal of Composites Science,
2018
DOI:10.3390/jcs2020019
|
|
|
[11]
|
Experimental study of saturation by visible light transmission in dual-scale fibrous reinforcements during composite manufacturing
Journal of Reinforced Plastics and Composites,
2017
DOI:10.1177/0731684417725187
|
|
|
[12]
|
Modeling and simulation of filling in dual-scale fibrous reinforcements: state of the art and new methodology to quantify the sink effect
Journal of Composite Materials,
2017
DOI:10.1177/0021998317734038
|
|
|
[13]
|
A two-phase flow model to simulate mold filling and saturation in Resin Transfer Molding
International Journal of Material Forming,
2016
DOI:10.1007/s12289-015-1225-z
|
|
|
[14]
|
An in situ investigation of microscopic infusion and void transport during vacuum-assisted infiltration by means of X-ray computed tomography
Composites Science and Technology,
2015
DOI:10.1016/j.compscitech.2015.09.016
|
|
|
[15]
|
Determination of the optimal impregnation velocity in Resin Transfer Molding by capillary rise experiments and infrared thermography
Composites Science and Technology,
2014
DOI:10.1016/j.compscitech.2014.05.019
|
|
|