has been cited by the following article(s):
[1]
|
Studies on Annealing Kinetics of Cold Forged AA6082
|
|
Advances in Manufacturing Engineering,
2023 |
|
|
[2]
|
Dynamic impact constitutive relation of 6008-T6 aluminum alloy based on dislocation density and second-phase particle strengthening effects
|
|
Journal of Alloys and Compounds,
2022 |
|
|
[3]
|
On the Influence of the Initial Shear Damage to the Cyclic Deformation and Damage Mechanism
|
|
Metals,
2022 |
|
|
[4]
|
Double shear performance of the hybrid aluminium metal matrix composite Al6063-SiC/Al2O3 fabricated through electromagnetic stir casting process
|
|
Materials Today: Proceedings,
2022 |
|
|
[5]
|
Experimental Estimation of Wear Behavior of Al6082 and Al7075 Alloys During Cold Forging.
|
|
Revue des Composites et des …,
2022 |
|
|
[6]
|
Evolution of Fe-containing intermetallic phases and abnormal grain growth in 6063 aluminum alloy during homogenization
|
|
2019 |
|
|
[7]
|
CORROSION MITIGATION OF GRAY CAST IRONAND ALUMINUM IMMERSED
|
|
CSIJ,
2019 |
|
|
[8]
|
Estimation of Wear and Friction Characteristics of Al Alloys for Cold Forging
|
|
IOSR Journal of Engineering,
2019 |
|
|
[9]
|
Effects of Heat Treatment on Microstructure and Mechanical Properties of an ECAPed Al–Zn–Mg–Cu Alloy
|
|
Advanced engineering materials,
2018 |
|
|
[10]
|
Prediction of mechanical and wear properties of 6026 aluminum alloy waste to be used in prosthetics limbs
|
|
AIP Conference Proceedings,
2018 |
|
|
[11]
|
Encyclopedia of Aluminum and Its Alloys, Two-Volume Set (Print)
|
|
2018 |
|
|
[12]
|
تأثير عملية الدرفلة على البارد على البنية المجهرية و الخصائص الميكانيكية لسبيكة Al-Mg-Si
|
|
2018 |
|
|
[13]
|
Microstructural evolution as well as mechanical and electrical properties of AA 6101 wire during recrystallization annealing treatment
|
|
Proceeding …,
2017 |
|
|
[14]
|
Processing of aluminium metal matrix composites-a review
|
|
Journal of …,
2017 |
|
|
[15]
|
Análisis de las propiedades mecánicas de tenacidad, esfuerzo de tensión y dureza de la aleación de aluminio 2024 t4, tratado térmicamente mediante el …
|
|
2016 |
|
|
[16]
|
The synergistic effect of Li addition on microstructure, texture and mechanical properties of extruded Al–Mg–Si alloys
|
|
Materials Chemistry and Physics,
2016 |
|
|
[17]
|
INFLUENCE OF SPECIMEN GEOMETRY AND LUBRICATION CONDITIONS ON THE COMPRESSIONBEHAVIOR OF AA6066 ALUMINUM ALLOY
|
|
International Journal of Mechanical Engineering (IJME) ,
2015 |
|
|
[18]
|
EVALUATION OF MICROSTRUCTURE AND MECHANICAL PROPERTIES OF Al6063-TiC COMPOSITES
|
|
2015 |
|
|
[1]
|
On the Influence of the Initial Shear Damage to the Cyclic Deformation and Damage Mechanism
Metals,
2022
DOI:10.3390/met12071072
|
|
|
[2]
|
Prediction of mechanical and wear properties of 6026 aluminum alloy waste to be used in prosthetics limbs
2018
DOI:10.1063/1.5039222
|
|
|
[3]
|
Influence of Intermetallics and Precipitates on the Fatigue Crack: Nucleation And Propagation in Aluminum Alloys 6005-T6, 6063-T6 and 6351-T6
SAE Technical Paper Series,
2012
DOI:10.4271/2012-36-0520
|
|
|