TITLE:
Design and Implementation of Double Base Integer Encoder of Term Metrical to Direct Binary
AUTHORS:
Takialddin A. Al Smadi
KEYWORDS:
ADC; CMOS VLSI; High Speed Data Converters; Code
JOURNAL NAME:
Journal of Signal and Information Processing,
Vol.4 No.4,
November
1,
2013
ABSTRACT:
The
digital processing signal
is one of the subdivisions of the analog digital converter interface; data
transfer rate in modern telecommunications is a critical parameter. The
greatest feature of parallel
conversion rate (4-bit parallel Flash 5/s converter) is designed and
modeled in 0.18 micron CMOS technology. Low speed swing operation as analog and
digital circuits leads to high speed of low power operation power with 70 mVt 1.8 V A/D
converter from the power dissipated during operation in the 5 GHz range.
Average offset is used to minimize the effect of the bias of a comparator. This paper contains the 8-bit encoder of the metrical term code to direct binary
code decreasing power consumption, which is shown by results and comparison
with other designs using computer simulation. The results of the flash
ADC time-interleaved are a more significant
improvement in terms of power and areas than those previously reported.