has been cited by the following article(s):
|
[1]
|
Continuous and Pulse TIG Arc Treatment for Surface Hardening of WAAM-MIG Parts
|
|
Transactions of the Indian …,
2024 |
|
|
|
|
[2]
|
Effect of Austempering and Martempering on Mechanical Properties and Structure of Bearing Steel (En31)
|
|
Sch J Eng Tech,
2024 |
|
|
|
|
[3]
|
Chapter 8| Heat Treatment Process Technologies—Hardening and Tempering Treatments
|
|
Rolling Bearing Steel: Design …, 2022 - … 100 Barr Harbor Drive,
2022 |
|
|
|
|
[4]
|
ИССЛЕДОВАНИЕ КИНЕТИКИ ДИФФУЗИОННОГО НАСЫЩЕНИЯ ВЫСОКОХРОМИСТЫХ СТАЛЕЙ МАРТЕНСИТНОГО КЛАССА ПОСЛЕ РАЗЛИЧНЫХ ВИДОВ ХИМИКО-ТЕРМИЧЕСКОЙ ОБРАБОТКИ
|
|
АВИАЦИОННЫЕ МАТЕРИАЛЫ И ТЕХНОЛОГИИ,
2022 |
|
|
|
|
[5]
|
Gaseous carbonitriding of high carbon chromium bearing steel: Correlation between composition, microstructure and stability
|
|
Surface and Coatings Technology,
2022 |
|
|
|
|
[6]
|
滚动轴承材料及热处理进展与展望 (续完)
|
|
轴承,
2020 |
|
|
|
|
[7]
|
Effect of ammonia addition on microstructure and wear performance of carbonitrided high carbon bearing steel AISI 52100
|
|
2019 |
|
|
|
|
[8]
|
Gefügeaufbau und mechanische Eigenschaften nach Einsatzhärten außerhalb des üblichen Parameterfeldes
|
|
2019 |
|
|
|
|
[9]
|
Surface Modification Innovation for Wear Resistance Increasing
|
|
2019 |
|
|
|
|
[10]
|
Effect of tribological parameters on sliding wear and friction coefficient which relates to preload loss in tapered roller bearing
|
|
Industrial Lubrication and Tribology,
2018 |
|
|
|
|
[11]
|
Hardness improvement on low carbon steel using pack carbonitriding method with holding time variation
|
|
Sriwijaya International Conference on Engineering, Science and Technology (SICEST 2016),
2017 |
|
|
|
|
[12]
|
The influence of carbonitriding on hardness, retained austenite and residual stress in 52100 steel
|
|
Thesis,
2015 |
|
|
|
|
[13]
|
Observing early stage rail axle bearing damage
|
|
Engineering Failure Analysis,
2015 |
|
|
|
|
[14]
|
Predication of A Mathematical Model for A Hardness in Steel-52100
|
|
Journal of Engineering and Development,
2014 |
|
|
|
|
[1]
|
Analysis of Malfunctioning of Centrifugal Compressor of Starter Engine of an Aircraft
Defect and Diffusion Forum,
2022
DOI:10.4028/p-2ur9hq
|
|
|
|
|
[2]
|
Rolling Bearing Steel: Design, Technology, Testing and Measurements
2022
DOI:10.1520/MNL8320200010
|
|
|
|
|
[3]
|
Rolling Bearing Steel: Design, Technology, Testing and Measurements
2022
DOI:10.1520/MNL8320200010
|
|
|
|
|
[4]
|
Rolling Bearing Steel: Design, Technology, Testing and Measurements
2022
DOI:10.1520/MNL8320200010
|
|
|
|
|
[5]
|
Rolling Bearing Steel: Design, Technology, Testing and Measurements
2022
DOI:10.1520/MNL8320200010
|
|
|
|
|
[6]
|
Effect of ammonia addition on microstructure and wear performance of carbonitrided high carbon bearing steel AISI 52100
Surface and Coatings Technology,
2019
DOI:10.1016/j.surfcoat.2019.01.019
|
|
|
|
|
[7]
|
Surface Modification Innovation for Wear Resistance Increasing
IOP Conference Series: Materials Science and Engineering,
2019
DOI:10.1088/1757-899X/613/1/012039
|
|
|
|
|
[8]
|
Hardness improvement on low carbon steel using pack carbonitriding method with holding time variation
MATEC Web of Conferences,
2017
DOI:10.1051/matecconf/201710101012
|
|
|
|