[1]
|
A.Y. Tonkovich , S. Perry, Y. Wang, D. Qiu, T. LaPlante and W.A. Rogers , “Microchanel process technology for compact Methane steam reforming,” Chem. Eng .Sci , vol. 59, pp. 4819–4824, 2004.
|
[2]
|
D. Hickman and L.D. Schmidt, “ Production of syngas by direct catalytic oxidation of Methane”, Science , vol. 259, pp. 343–346,1993.
|
[3]
|
E.E. Gonzo, “ Hydrogen from methanol-steam reforming. Isothermal and adiabatic monolith reactors’ simulation.” ,Int J Hydrogen Energy, vol.33,pp. 3511 – 3516, 2008.
|
[4]
|
E. Lo′pez, A. Irigoyen, T. Trifonov, A. Rodr?′guez, J. Llorca, “ A million-channel reformer on a fingertip: Moving down the scale in hydrogen production”, Int.J. Hydrogen Energy, vol.35 ,pp. 3472 – 3479, 2010.
|
[5]
|
L. Shi, “ Bayless D J and Prudich M E. A CFD model of autothermal reforming”, Int J Hydrogen Energy ,vol .35 ,pp. 3472 – 3479 , 2010.
|
[6]
|
W. Cai, F. Wang, A.V. Veen, C. Descorme, Y. Schuurman and W. Shen , “ Mirodatos C. Hydrogen production from ethanol steam reforming in a micro-channel reactor”, Int J Hydrogen Energy, vol. 35,pp. 1152 – 1159, 2010.
|
[7]
|
X. Zhai, S. Ding, Y. Cheng, Y. Jin and Y. Cheng, “ CFD simulation with detailed chemistry of steam reforming of Methane for hydrogen production in an integrated micro-reactor” , Int J Hydrogen Energy , vol. 35, pp. 5383 – 5392, 2010.
|
[8]
|
T. Boger, “ Monolithic catalysts for the chemical Industry”, Ind Eng Chem Res, vol.43 ,pp. 4602-4611, 2004.
|
[9]
|
R.S. Benson and J .W. Ponton., “ Process Miniaturisation-A Route to Total Environmental Acceptability”, Chem. Eng. Res. Des. ,vol. 71,pp. 160–168,1993.
|
[10]
|
A.Y. Tonkovich, B. Yang , S.T. Perry, S.P. Fitzgerald, Y. Wang , “ From seconds to milliseconds to microseconds through tailored microchannel reactor design of a steam Methanereformer” , Catal Today , vol.120 ,pp. 21-29, 2007.
|
[11]
|
R. J. Bradley, L.C. Nathan, N.T. Diana, A.D. Robert, D.H. Jamelyn, Y. Wang , “ Engineered SMR catalysts based on hydrothermally stable, porous, ceramic supports for microchannel reactors” ,Catal Today,vol. 120 , pp. 54-62, 2007.
|
[12]
|
A.K. Avci, D.L. Trimm, M. Karakaya, “ Microreactor catalytic combustion for chemicals processing”, Catal To-day,vol.155 ,pp. 66-74 ,2010.
|
[13]
|
G. Arzamendi, P.M. Diéguez, M. Montes, J.A. Odriozola, E. Falabella, E. Sousa-Aguiar and L.M .Gandía, “Methane steam reforming in a microchannel reactor for GTL intensification: A computational fluid dynamics simulation study ”, Chemical Engineering Journal , vol.168 ,pp. 168-173, 2009.
|
[14]
|
A. Fazeli, M. Behnam, “ Hydrogen production in a zigzag and straight catalytic wall coated micro channel reactor by CFD modeling”, Int J Hydrogen Energy, vol.35 ,pp. 9496-9503, 2009..
|
[15]
|
G. Arzamendi, P.M. Diéguez, M. Montes, M.A . Centeno, J.A. Odriozola, L.M . Gandía, “Integration of methanol steam reforming and combustion in a microchannel reactor for H2 production: A CFD simulation study ”, Catalysis Today, vol.143, pp. 25-31,2009.
|
[16]
|
S. Fukahori, H. Koga, T . Kitaoka, M. Nakamura, H. Wariis hi , “ Steam reforming behavior of methanol using paper-structured catalysts: experimental and computational fluid dynamic analysis”, Int J Hydrogen Energy, vol. 33, pp. 1661-70?2008.
|
[17]
|
I.Uriz, G.Arzamendi, E.,López,J. Llorca, L.M. Gandía , “Computational fluid dynamics simulation of ethanol steam reforming in catalytic wall microchannels ”, Chemical Engineering Journal, vol.167 ,pp. 536-544 ,2011.
|
[18]
|
L. Shi, D.J. Bayless and M.E. Prudich , “ A CFD model of autothermal reforming” , Int J Hydrogen Energy, vol.34 ,pp. 7666-7675, 2009.
|
[19]
|
M. Hartmanna, L . Maierb, O. Deutschmann, “ Hydrogen production by catalytic partial oxidation of iso-octane at varying flow rate and fuel/oxygen ratio: From detailed kinetics to reactor behavior”, Applied CatalysisA:General , vol.391, pp. 144–152, 2011.
|
[20]
|
M . Hartmann, L. Maier and H.D .Minh, “ Deut-schmann O. Catalytic partial oxidation of iso-octane over rhodium catalysts: An experimental, modeling, and simulation study”, Combustion and Flame , vol.157, pp. 1771–1782,2010.
|
[21]
|
K. Zygourakis and R. Aris, “ Multiple oxidation reactions and diffusion in the catalytic layer of monolith reactors”, Chem. Eng Sci ,vol.32, pp. 733-744 ,1983.
|
[22]
|
Influence of the propene diffusion inside the catalytic layer”, Chemical Engineering Science, vol.55,pp. 1707-1716,2000.
|
[23]
|
M.J. Stutz, D. Poulikakos, “ Optimum washcoat thickness of a monolith reactor for syngas production by partial oxidation of Methane” ,Chemical Engineering Science ,vol.63 ,pp. 1761 – 1770,2008.
|
[24]
|
N. Mladenov, J. Koop, S. Tischer, O. Deutschmann “Modeling of transport and chemistry in channel flows of automotive catalytic converters ”, Chem.Eng.Sci, vol.65, pp. 812-826, 2010.
|
[25]
|
Hoseini N, Msc thesis, Tarbiat Modares University: Tehran- Iran, 2010.
|
[26]
|
J.P. Du Plessis, W.G. Gray, “ Pore-scale modeling of interstitial transport phenomena. In: Fluid Transport in Porous media”, Computational Mechanics Publication Southampton, pp. 61–104,1997.
|
[27]
|
H.K. Plummer, R.J. Jr, R.H. Baird, A.A. Hammerle and Adamczyk JD, “Measurement of Automotive Catalyst Washcoat Loading Parameters by Microscopy Techniques”, Microscopy and Microanalysis, vol.5, pp. 267-281,1999.
|