[1]
|
A. K. S. Bhat, “Analysis and design of a modified series resonant converter,” IEEE Transactions, Power Electronics, Vol. 8, pp. 423-430, October 1995.
|
[2]
|
A. K. S. Bha, “Analysis and design of LCL-Type series resonant converter,” IEEE INTELEC, pp. 172-178, 1994.
|
[3]
|
A. K. S. Bhat, “Analysis and design of a fixed-frequency LCL-Type series resonant converter with capacitive output filter,” IEE PROC-Circuits Devices System, Vol. 144, No. 2, April 1997.
|
[4]
|
R. Sevverns, “Topologie for three element resonant converter,” in IEEE Applied Power Electronics, Conference Record, pp. 712-722, March 1990.
|
[5]
|
E. G. Schmidtner, “A new High-Frequency resonant Converter topology,” in High Frequency Power Conversion Conference Record, pp. 390-403, 1988.
|
[6]
|
R. L. Steigerwald, “A comparison of half bridge resonant converter topology,” IEEE Transaction, Power Electronics, Vol. 3, pp.174-182, April 1988.
|
[7]
|
T. H. Solane, “Design of high-efficiency series resonant converter above resonance,” IEEE Transactions, Aerospace Electronics System, Vol. 26, pp. 393-402, March 1990.
|
[8]
|
V. Agarwal, V. Belaguli, and A. K. S. Bhat, “Large signal analysis using discrete time domain modeling for LCC-type parallel resonant converter operating in discontinuous current mode,” in Canadian Conference Electrical and Computer Engineering, pp. 83–88, 1993.
|
[9]
|
K. S Bhat, “Analysis and design of a series parallel resonant converter,” IEEE Transactions on Power Electronics, Vol. 8, pp.1–11, 1993.
|
[10]
|
V. Belaguli, “Series-parallel and parallel series resonant converters operating on the utility line-analysis, simulation and experimental results,” Ph.D. Dissertation, University Victoria, 1995.
|
[11]
|
R. Severns, “Topologies for three element resonant converters,” in IEEE Applied Power Electronics, Conference Record, pp. 712–722, 1990.
|
[12]
|
H. Neufeld, “Half-bridge resonant converter using the CS-360,” Cherry Semiconductor, Application Note, 1990.
|
[13]
|
B. P. McGrath, “Design of a soft-switched 6-kw battery charger for traction applications,” IEEE Transactions on Power Electronics, Vol. 22, No. 4, pp.1136–1142, July 2007.
|
[14]
|
H. Deng, “Analysis and design of iterative learning control strategies for UPS inverters,” IEEE Transactions on Industrial Electronics, Vol. 54, No. 3, pp. 1739–1751, June 2007.
|
[15]
|
F. Z. Peng, “Z-Source inverter for motor drives,” IEEE Transactions on Power Electronics, Vol. 20, No. 4, pp.857–862, July 2005.
|
[16]
|
V. Belaguli, “Series-parallel and resonant converter operating in DCM–Analysis, design, simulation and experimental results,” IEEE Transactions on Circuits and Systems, Vol. 47, pp. 433–441, 2000.
|
[17]
|
Y. Jang, “Isolated boost converters,” IEEE Transactions on Power Electronics, Vol. 22, No. 4, pp. 1514–1521, July 2007.
|