[1]
|
J. S. Beck, J. C. Vartuli, W. J. Roth, M. E. Leonowics, C. T. Kresge, K. D. Schmitt, C. T. –W. Chu, D. H. Olson, E. W. Sheppard, S. B. McCullen, J. B. Higgins and J. L. Schlenker, A new family of mesoporous molecular sieves prepared with liquid crystal templates, J. Am. Chem. Soc. 114 (1992)10834–10843. doi:10.1021/ja00053a020
|
[2]
|
A. Corma, From Microporous to Mesoporous Molecular Sieve Materials and Their Use in Catalysis, Chem. Rev. 97 (1997) 2373–2420. doi:10.1021/cr960406n
|
[3]
|
K. M. Reddy, C. Song, From Microporous to Mesoporous Molecular Sieve Materials and Their Use in Catalysis, Catal. Today 31 (1996)137–144. doi:10.1016/0920-5861(96)00030-2
|
[4]
|
P. Serrano, J. Aguado, J. M. Escola, Catalytic Cracking of a Polyolefin Mixture over Different Acid Solid Catalysts, Ind. Eng. Chem. Res. 39 (2000)1177–1184. doi:10.1021/ie9906363
|
[5]
|
Ghanbari-Siahkali, A. Philippou, J. Dwyer, M. W. Anderson, The acidity and catalytic activity of heteropoly acid on MCM-41 investigated by MAS NMR, FTIR and catalytic tests, Appl. Catal. A: General 192 (2000) 57-69. doi:10.1016/S0926-860X(99)00333-6
|
[6]
|
Y. Zhao, S.L. Qiu, Y. Tang, C. Z. Yu (editors), Recent Progress in Mesostuctured Materials, Stud. Surf. Sci. & Catal. Vol. 165 (2007) 1–920.
|
[7]
|
V. Alfredsson and M. W. Anderson, Structure of MCM-48 Revealed by Transmission Electron Microscopy, Chem. Mater. 8 (1996) 1141–1146. doi:10.1021/cm950568k
|
[8]
|
Timothy J.V. Yates, John Meurig Thomas, Jose-Jesus Fernandez, Osamu Terasaki, Ryong Ryoo, Paul A. Midgley, Three-dimensional realspace crystallography of MCM-48 mesoporous silica revealed by scanning transmission electron tomography, Chemical Physics Letters 418 (2006) 540–543.
|
[9]
|
i Man Kim, Seong Kyun Kim and Ryong Ryoo, Synthesis of MCM-48 single crystals,Chem. Commun. (1998) 259–560.
|
[10]
|
Tingshun Jiang, Duolin Wu, Jiannan Song, Xuping Zhou, Qian Zhao, Meiru Ji, Hengbo Yin, Synthesis and Characterization of Zr- MCM-48 with good thermal and hydrothermal stability, Powder Technology 207 (2011) 422–427. doi:10.1016/j.powtec.2010.11.030
|
[11]
|
W.C. Zhan, Y.L. Guo, Y.Q. Wang, X.H. Liu, Y. Guo, Y.S. Wang, Z.G, Zhang, G.Z. Lu, Synthesis of Lanthanum–Doped MCM–48 Molecular Sieves and Its Catalytic Performance for the Oxidation of Styrene, The Journal of Physical Chemistry B 111 (42) (2007) 12103–12110. doi:10.1021/jp074521l
|
[12]
|
Y.F. Shao, L.Z. Wang, J.L. Zhang, M. Anpo, Synthesis of Hydrothermally Stable and Long-Range Ordered Ce–MCM–48 and Fe–MCM–48 Materials, The Journal of Physical Chemistry B 109 (44) (2005) 20835–20841. doi:10.1021/jp054024+
|
[13]
|
S. Gómez, O. Giraldo, L.J. Garcés, J. Villegas, S.L. Suib, New Synthetic Route for the Incorporation of Manganese Species into the Pores of MCM–48, Chemistry of Materials 16 (2004) 2411–2417.
|
[14]
|
S. Yuan, L.Y. Shi, K. Mori, H. Yamashita, Synthesis of Ticontaining MCM–48 by using TiF4 as titanium source, Materials Letters 62 (2008) 3028–3030. doi:10.1016/j.matlet.2008.01.100
|
[15]
|
U.S. Taralkar, P. Kalita, R. Kumar, P.N. Joshi, Synthesis, characterization and catalytic performance of Sn–MCM–48 in solvent–free Mukaiyama–type aldol condensationreactions, Applied Catalysis A: General 358 (2009) 88–94. doi:10.1016/j.apcata.2009.02.001
|
[16]
|
X.L. Yang, W.L. Dai, R.H. Gao, H. Chen, H.X. Li, Y. Cao, K.N. Fan, Synthesis, characterization and catalytic application of mesoporous W–MCM–48 for the selective oxidation of cyclopentene to glutaraldehyde, Journal of Molecular Catalysis A: Chemical 241 (2005) 205-214. doi:10.1016/j.molcata.2005.07.025
|
[17]
|
M.L. Pe?a, A. Dejoz, V. Fornés, F. Rey, M. I. Vázquez, J. M. López Nieto, Vcontaining MCM-41 and MCM-48 catalysts for the selective oxidation of propane in gas phase, Applied Catalysis A: General 209 (2001) 155-164. doi:10.1016/S0926-860X(00)00761-4
|
[18]
|
M. Hartmann, S. Racouchot, C. Bischof, M. Hartmann, S. Racouchot, C. Bischof, Characterization of copper and zinc containing MCM–41 and MCM–48 mesoporous molecular sieves by temperature programmed reduction and carbon monoxide adsorption, Microporous and Mesoporous Materials 27 (1999) 309-320. doi:10.1016/S1387-1811(98)00264-9
|
[19]
|
M.L. Guzmán-Castillo, H. Armendáriz-Herrera, A. Tobón-Cervantes, D.R. Acosta, P. Salas-Castillo, A. [20] [20] Montoya de la Funte, A. Vázquez-Rodriguez, The effect of sulfate ion on the synthesis and stability of mesoporous materials, Stud. Surf. Sci. Catal. 142 (2002) 1039-1046. doi:10.1016/S0167-2991(02)80261-0
|
[20]
|
C.-L. Chen, H.-P. Lin, S.-T.Wong, C.-Y. Mou, Sulfated zirconia catalyst supported on MCM-41 mesoporous molecular sieve, Appl. Catal. A: General 215 (2001) 21-30. doi:10.1016/S0926-860X(01)00504-X
|
[21]
|
S. Choi, Y. Wang, Z. Nie, J. Liu, C.H.F. Peden, Cssubstituted tungstophosphoric acid salt supported on mesoporous silica, Catal. Today 55 (2000) 117-124. doi:10.1016/S0920-5861(99)00231-X
|
[22]
|
P. Salas, L. F. Chen, J.A. Wang, H. Armendáriz, M.L. Guzman, J.A. Montoya, D. R. Acosta, Thermal Stability and Surface Acidity of Mesoporous Silica Doubly Doped by Incorporation of Sulfate and Zirconium Ions, Applied Surface Science 252 (2005) 1124-1132. doi:10.1016/j.apsusc.2005.02.032
|
[23]
|
J. A. Wang, L. F. Chen, L. E. Nore?a, J. Navarrete, M. E. Llanos, J. L. Contreras, O. Novaro. Mesoporous structure, surface acidity and catalytic properties of the Pt/Zr-MCM-41 catalysts promoted by 12-tungstophosphoric acid, Microporous and Mesoporous Materials 112 (2008) 61-76. doi:10.1016/j.micromeso.2007.09.015
|
[24]
|
C.A. Emeis, Determination of Integrated Molar Extinction Coefficients for Infrared Absorption Bands of Pyridine Adsorbed on Solid Acid Catalysts, J. Catal. 141 (1993) 347-354. doi:10.1006/jcat.1993.1145
|
[25]
|
T. Barzzetti, E. Selli, D. Moscotti, L. Forni, Pyridine and ammonia as probes for FTIR analysis of solid acid catalysts, J. Chem. Soc. Faraday Trans. 92 (1996) 1401-1407. doi:10.1039/ft9969201401
|
[26]
|
A.V. Ivanov, T.V. Vasina, V.D. Nissenbaum, L.M. Kustov, M.N. Timofeeva, J.I. Houzvicka, Isomerization of n-hexane on the Pt-promoted Keggin and Dawson tungstophosphoric heteropoly acids supported on zirconia, Appl. Catal. A: Gen. 259 (2004) 65-72. doi:10.1016/j.apcata.2003.09.011
|
[27]
|
L.R. Pizzio, C.V. Cáceres, M.N. Blanco, Acid catalysts prepared by impregnation of tungstophosphoric acid solutions on different supports, Appl. Catal. A: Gen. 167 (1998) 283-294. doi:10.1016/S0926-860X(97)00328-1
|
[28]
|
J.C. Edwards, C.Y. Thiel, B. Nenac, J.F. Knifton, Solidstate NMR and FT-IR investigation of 12-tungstophosphoric acid on TiO2, Catal. Lett. 51 (1998) 77-83. doi:10.1023/A:1019045319788
|
[29]
|
L.F. Chen, J.A. Wang, L.E. Noren, J. Aguilar, J. Navarrete, P. Salas, J.A. Montoya, P. Del Angel, Synthesis and physicochemical properties of Zr-MCM-41 mesoporous molecular sieves and Pt/H3PW12O40/Zr-MCM-41 catalysts, Journal of Solid State Chemistry 180 (2007) 2958-2972.
|
[30]
|
D. Srinivas, R. Srivastava, P. Ratnasamy, Transesterifications over titanosilicate molecular sieves, Catal. Today 96 (2004) 127-133.
|
[31]
|
A. Sakthivel, S.E. Dapurkar, N.M. Gupta, S.K. Kulshreshtha, P. Selvam, The influence of aluminium sources on the acidic behaviour as well as on the catalytic activity of mesoporous H-AlMCM-41 molecular sieves, Micropor. Mesopor. Mater. 65 (2003) 177-187. doi:10.1016/j.micromeso.2003.08.004
|
[32]
|
T. López, J. Navarrete, R. Gómez, O. Novaro, F. Figueras, H. Armentáriz, Preparation of solgel sulfated ZrO2-SiO2 and characterization of its surface acidity, Appl. Catal. 125 (1999) 217-232.
|
[33]
|
J.A. Anderson, C. Fergusson, I. Rodriguez-Ramos, A. Guerrero-Ruiz, Influence of Si/Zr ratio on the formation of surface acidity in silicazirconia aerogels, J. Catal. 192 (2000) 344-354. doi:10.1006/jcat.2000.2850
|