[1]
|
Y. Sekine, et al., “Fault Diagnosis of Power Systems,” Proceedings of the IEEE, Vol. 80, No. 5, May 1992, pp. 673-683. doi:10.1109/5.137222
|
[2]
|
R. N. Mahanty and P. B. Gupta Dutta, “A Fuzzy Logic Based Fault Classification Approach Using Current Samples Only,” Electric Power Systems Research, 77, 2007, pp. 501-507.doi:10.1016/j.epsr.2006.04.009
|
[3]
|
A. K. Pradhan, A. Routray and M. S. Gudipalli, “Fault Direction Estimation in Radial Distribution System Using Phase Change in Sequence Current,” IEEE Transactions On Power Delivery, Vol. 22, No. 4, 2007, pp. 2065-2071.
|
[4]
|
A. Ukil, B. Deck and V. H. Shah, “Current-Only Directional Overcurrent Relay,” IEEE Sensor Journal, Vol. 11, No. 6, 2011, pp. 1403-1404.
doi:10.1109/JSEN.2010.2094186
|
[5]
|
A. K. Pradhan and P. Jena, “Solution to Close-in Fault Problem in Directional Relaying,” IEEE Transactions On Power Delivery, Vol. 23, No. 3, 2008, pp. 1690-1692.
doi:10.1109/TPWRD.2008.923149
|
[6]
|
A. Ukil, B. Deck and V. H. Shah, “Smart Distribution Protection Using Current-only Directional Overcurrent Relay, IEEE PES Conference Innovative Smart Grid Technology, 2010, pp. 1-7.
|
[7]
|
O. A. S. Youssef, “Fault Classification Based on Wavelet Transforms,” IEEE PES T&D Conference and Exposition, 2001, pp. 531-536.
|
[8]
|
S. A. Gafoor and P. V. R. Rao, “Wavelet Based Fault Detection, Classification and Location in Transmission Lines,” First International Power and Energy Conference- PECon, November 2006, pp. 114-118.
|
[9]
|
S. Das, N. Karnik and S. Santoso, “Distribution Fault-Locating Algorithms Using Current Only,” IEEE Trans. On Power Delivery, Vol. 27, No. 3, 2012, pp. 1144-1153. doi:10.1109/TPWRD.2012.2191422
|
[10]
|
A. Ukil, B. Deck and V. H. Shah, “Current-Only Directional Over-current Protection for Distribution Automation: Challenges and Solutions,” IEEE Transactions on Smart Grid, Vol. PP, No. 99, August 2012, pp. 1-8.
|