[1]
|
Adepoju, S. O. and Olaleye, B. M., (2001). Gravity concentration of silica sand from
Itakpe iron-ore tailings by tabling operation. Nigerian Journal of Engineering Management. Vol. 2, No. 2, 51-55.
|
[2]
|
Akande, J. M. and Olaleye, B. M., (2000). Recovery of Galena concentrate from lead-
Zinc ore by jigging operation. Proceedings of the 18th Annual Conference of the
Institute of Science and Technology. 28th Nov. – 1st Dec. 2000.
|
[3]
|
Galvin, K.P., Pratten, S.J., Lambert, N., Callen, A.M., and Lui, J. (2002). Influence of a
jigging action on the gravity separation achieved in a teetered bed separator.
Minerals Engineering 15, 1199–1202.
|
[4]
|
Gribble, C.D; (1988), Rutley’s element of mineralogy, 27th edition, London Pg. 235-6
and 427-9.
|
[5]
|
Honaker, R.Q., Wang, D., Ho, K., (1996). Application of the Falcon concentrator for fine coal cleaning. Miner. Eng. 9 (11), 1143–1156.
|
[6]
|
Mohanty, M. K., Honaker, R. Q., and Patwardhan, A. (2002). Altair jig: an in-plant
evaluation for fine coal cleaning. Minerals Engineering 15, 157–166
|
[7]
|
Parkinson, J.W., (1989). Centrifugal jig coal cleaning feasibility test results, Interim
Report prepared for Electric Power Research Institute (EPRI), California and
Empire State Electric Energy Research Corporation, NY.
|
[8]
|
Pryor, E.J. (1965), Mineral processing, Elsevier Publishing Co. Ltd. Amsterdam –
London – New York
|
[9]
|
Wills B.A; (1989), Mineral Processing Technology, An introduction to the Practical
aspect of ore treatment and mineral recovery. 3rd edition, Pergamon, New York.
|
[10]
|
Yang, D. C., Bozzato, P., and Ferrara, G. (2003). Iron Ore Beneficiation with Packed
Column Jig. Journal of Minerals & Materials Characterization & Engineering,
Vol. 2, No.1, pp43-51, 2003.
|