[1]
|
U. Pogliano, G. C. Bosco and M. Lanzillotti, “Precision Measurement of AC Voltages in the Millivolt Ranges,” Proceedings, XVII IMEKO World Congress, 22-27 June 2003, Dubrovnik, Croatia, pp. 625-629.
|
[2]
|
J. Zinkernagel, “A Low-Voltage and High-Frequency ac-dc Transfer System Using Inductive Dividers,” IEEE Transactions on Instrumentation and Measurement, Vol. 43, No. 4, August 1994, pp. 544-548.
|
[3]
|
U. Pogliano, B. Trinchera and F. Francone, “Reconfigur- able Unit for Precise RMS Measurements,” IEEE Transactions on Instrumentation and Measurement, Vol. 58, No. 4, April 2009, pp. 827-831.
|
[4]
|
I. Budovsky and B. D. Inglis, “High-Frequency AC-DC Differences of NML Single-Junction Thermal Voltage Converters,” Institute of Measurement, IEEE Transactions on Instrumentation and Measurement, Vol. 50, No 1, February 2001, pp. 101-105.
|
[5]
|
H. Laiz and M. Klonz, “A Simulation Tool for the AC-DC Transfer Difference of Thermal Converters at Low Frequencies,” IEEE Transactions on Instrumentation and Measurement, Vol. 48, No. 6, December 1999, pp. 1155-1160.
|
[6]
|
H. Fujiki, “New Thin-Film Multijunction Thermal Converter Design for Improved High-Frequency Performance,” IEEE Transactions on Instrumentation and Measurement, Vol. 7, No. 9, September 2007, pp. 1243-1247.
|
[7]
|
M. Klonz, Laiz and E. Kessler, “Development of Thin- Film Multijunction Thermal Converters at PTB/IPHT,” IEEE Transactions on Instrumentation and Measurement, Vol. 50, No. 6, December 2001, pp. 1490-1498.
|
[8]
|
M. Klonz, H. Laiz, T. Spiegel and P. Bittel, “AC-DC Current Transfer Step-Up and Step-Down Calibration and Uncertainty Calculation,” IEEE Transactions on Instrumentation and Measurement, Vol. 51, No. 5, October 2002, pp. 1027-1034.
|
[9]
|
H. Dintners, M. Klonz, A. Lerm, F. VBlklein and T. Weimann, “AC-DC-mV-Transfer with Highly Sensitive Thin-Film Multijunction Thermal Converters,” IEEE Transactions on Instrumentation and Measurement, Vol. IM-42, April 1993, pp. 612-614.
|
[10]
|
I. Budovsky, “A Micropotentiometer-Based System for Low-Voltage Calibration of Alternating Voltage Measurement Standards,” IEEE Transactions on Instrumentation and Measurement, Vol. 46, No. 2, April 1997, pp. 356-360.
|
[11]
|
T. Funck, M. Stojanovi´c and M. Klonz, “Improved High- Input-Impedance mV-Amplifiers with Gain Factors from 10 to 900,” IEEE Transactions on Instrumentation and Measurement, Vol. 58, No. 4, April 2009, pp. 859-862.
|
[12]
|
J. R. Kinard, D. X. Huang and D. B. Novotny, “Integrated Thin-Film Micropotentiometers,” IEEE Transactions on Instrumentation and Measurement, Vol. IM-44, April 1995, pp. 374-376.
|
[13]
|
H. A. Mageed, M. Halawa, A. F. Zobaa and M. M. Abdel Aziz, “Establishment and Characterization of a Traceable AC Voltage Source at NIS, Egypt,” Universities Power Engineering Conference, Padova, Italy, September 2008.
|
[14]
|
www.atmel.com/atmel/acrobat/doc0368.pdf.
|
[15]
|
D. X. Huang, G. Rebuldela and J. D. Harper, “RF-DC Differences of Micropotentiometers,” IEEE Transactions on Instrumentation and Measurement, Vol. 46, No. 2, April 1997, pp. 337-341.
|
[16]
|
Fluke Corporation, “Calibration: Philosophy in Practice,” 2nd Edition, Legal Department, Everett, WA 98206-9090, May 1994.
|
[17]
|
P. S. Filipski and M. Boecker, “AC-DC Current Transfer Standards and Calibrations at NRC,” Symposium of Metrology, Mexico, October 2006.
|
[18]
|
U. Pogliano, G. C. Bosco, “Determination of the Frequency Dependence of the AC-DC Voltage Standard at IEN,” IEEE Transactions on Instrumentation and Measurement, Vol. 46, No. 2, April 1997, pp. 373-376.
|
[19]
|
U. Pogliano, G. C. Bosco and M. Lanzillotti, “Generalized Automatic System for AC/DC Transfer, AC Voltage, and AC Current Measurements,” IEEE Transactions on Instrumentation and Measurement, Vol. 55, No. 5, October 2006, pp. 1747-1751.
|
[20]
|
C. D. Capua, D. Grillo and E. Romeo, “The Implementation of an Automatic Measurement Station for the Determination of the Calibration Intervals for a DMM,” IEEE International Conference on Virtual Environments, Human Computer Interfaces and Measurement Systems, La Coruna-Spain, 10-12 July 2006, pp. 58-62.
|
[21]
|
B. Stojanovic, M. Klonz, H. Laiz and S. Kraicanic, “AC-DC Voltage Transfer Module With Thin-Film Multijunction Thermal Converter,” IEEE Transactions on Instrumentation and Measurement, Vol. 52, No. 2, April 2003, pp. 355-358.
|
[22]
|
T. E. Lipe, “Operation and Reference Manual for the NIST Automated AC-DC Calibration Systems and Software,” NIST Special Publication, May 2004.
|
[23]
|
“The Expression of Uncertainty and Confidence in Measurement,” United Kingdom Accreditation Service, NAMAS, M 3003, 1st Edition, January 2007.
|
[24]
|
“Guide to the Expression of Uncertainty in Measurement,” Saudi Arabian Standards Organization, 2006.
|
[25]
|
D. X. Huang, J. Harper and D. Mcadoo, “Measurement Assurance of RF-DC Differences of Thermal Standards,” NCSL Workshop & Symposium, 1996.
|