TITLE:
Study of New Planar Resonator’s Topologies Little Perceptible in Variations of Substratum’s Height
AUTHORS:
Nizar Zrigui, Lahbib Zenkouar, Seddik Bri
KEYWORDS:
Resonator; Planar Technology; Topologies; Echo’s Frequency, Substratum’s Height; Quality Factor
JOURNAL NAME:
Circuits and Systems,
Vol.3 No.3,
June
25,
2012
ABSTRACT: The mobile communication (radio, mobile, satellite telephony…) insert band filters which are required to comply with stringent pass-band characteristics concerning the selectivity, the group delay, the insertion losses and the mass and volume. The mass and volume of payload electronic equipment is a significant contributor to the overall cost of space systems. Within this framework, many improvements were made in the design of filters and multiplexers which represent a considerable portion of the overall satellite payload. The High Temperature Superconducting (HTS) planar technology permits to realize compact size filtering devices. Moreover, it could also provide a superior performance not attainable by any other technology. However, not controllable parameters in the manufacturing processes (indistinctness of the engraving, the not uniformity of substratum thickness) do not allow to obtain a precision on the echo’s frequency and to keep a high quality factor. So, it is necessary to use method to tune the center frequency of filters after the fabrication or to study new resonator topologies which present lower sensitivity to LAIO3 substrate thickness. This last point is the object of this article.