Nardeli, J.V., Fugivara, C.S., Taryba, M., Pinto, E.R.P., Montemor, M.F. and Benedetti, A.V. (2019) Tannin: A Natural Corrosion Inhibitor for Aluminum Alloys. Progress in Organic Coatings, 135, 368-381.
https://doi.org/10.1016/j.porgcoat.2019.05.035

has been cited by the following article:

• TITLE: Experimental Investigation of Inhibition Efficiency of Crocin for Chloride-Induced Corrosion of Aluminum Alloys

  AUTHORS: Paraskevi Pantazopoulou, Stamatina Theohari, Sofia Kalogeropoulou

  KEYWORDS: Crocin, Aluminum Corrosion, Eco-Friendly Inhibitors, Sodium Chloride Environment, Electrochemical and Gravimetric Methods

  JOURNAL NAME: Open Journal of Applied Sciences, Vol.12 No.11, November 29, 2022

  ABSTRACT: The use of Crocin, derived from the flowers of Crocus sativus, is investigated as corrosion inhibitor for the AA1050, AA5083, AA5754 and AA6082 aluminum alloys in chloride ions environment. Aluminum and aluminum alloys are subjected to corrosion in the aggressive environment of chlorides, so several green corrosion inhibitors, mostly of plant origin, with minimum impact on health and the environment have been examined. In this study, the inhibition efficiency of 1.25 mM Crocin in a 0.01 M NaCl corrosive solution was assessed via electrochemical corrosion techniques and gravimetric mass loss measurements of the aluminum alloys. The surface of the specimens was examined using Scanning Electron Microscopy, Energy Dispersive Spectroscopy, Stereomicroscopy and Glossiness measurements. Experimental results reveal the protective anticorrosive action of Crocin for all aluminum alloys in the sodium chloride medium.