Ajiboye, T.K., Abdulkareem, S. and Anibijuwon, A.O.Y. (2016) Investigation of Mechanical Properties of Briquette Product of Sawdust-Charcoal as a Potential Domestic Energy Source. Journal of Applied Science and Environmental Management, 20, 1179-1188.
https://doi.org/10.4314/jasem.v20i4.34

has been cited by the following article:

• TITLE: Recovering Wood Waste to Produce Briquettes Enriched with Commercial Kraft Lignin

  AUTHORS: Carlos Eduardo Silveira da Silva, Fernando José Borges Gomes, Larisse Aparecida Ribas Batalha, Roberto Carlos Costa Lelis, Ana Márcia Macedo Ladeira Carvalho, Angélica de Cássia Oliveira Carneiro, Alexandre Monteiro de Carvalho

  KEYWORDS: Hardwood Biomass Densification, Heating Values, Solid Fuel

  JOURNAL NAME: Natural Resources, Vol.12 No.5, May 31, 2021

  ABSTRACT: Aiming to use lignocellulosic biomass as energy source, one of the process that may aggregate values is the densification process, which allows the production of bioenergy using solid fuels, mainly for reducing transportation costs. In this research, solid fuel from co-briquetting of wood residues from sawmill using commercial kraft lignin as binder was investigated. The effects of compression pressure (900, 1200 and 1500 PSI) and briquette formulation (varying wood and kraft lignin proportion) on the quality and characteristics of briquettes were evaluated. The main findings were that briquetting of wood residues with kraft lignin resulted in an improvement of bulk density, strength rupture modulus, low heating value (LHV) and high heating value (HHV). The briquettes using 4% and 6% of kraft lignin, and submitted to 1200 to 1500 PSI, presented higher bulk density and strength resistance, respectively. On the other hand, the heating values showed the highest results with the addition of 2% lignin at 900 PSI, being the legal range for additives in briquettes for many countries such as in European Union.