Liu, J., Chen, G.M. and Yang, J.P. (2008) Preparation and Characterization of Poly(vinyl chloride)/Layered Double Hydroxide Nano-Composites with Enhanced Thermal Stability. Polymer, 49, 3923-3927.
http://dx.doi.org/10.1016/j.polymer.2008.07.014

has been cited by the following article:

• TITLE: Preparation of MgAl LDHs Intercalated with Amines and Effect on Thermal Behavior for Poly(vinyl chloride)

  AUTHORS: Xiaoyu Xue, Hongmei Zhang, Shuhua Zhang

  KEYWORDS: Poly(vinyl chloride), Layered Double Hydroxide, Thermal Stability

  JOURNAL NAME: Advances in Materials Physics and Chemistry, Vol.4 No.12, December 10, 2014

  ABSTRACT: MgAl LDHs intercalated with CO(NH2)2, NH4Cl and NH3·H2O were prepared by co-precipitation and XRD, FT-IR, TGA-DTA and SEM techniques were employed for characterization. The results indicated that the layer-layer spacing of LDHs was enlarged by 0.169, 0.285 and 0.227 Å with the intercalation of CO(NH2)2, NH+4 and NH3, separately. The effects on thermal stability and degradation behavior of synthesized LDHs where mole ratios of Mg/Al/urea = 3:1:1, Mg/Al/NH4Cl = 3:1:1.5 and Mg/Al/NH3·H2O = 3:1:0.5 were investigated by Congo Red Method and thermogravimetric analysis (TGA) from 25°C - 800°C under N2. The TGA and DTA results showed, by incorporating 5% MgAl-CO(NH2)2 LDH, the dehydrochlorination temperature of PVC composites is 12°C higher than MgAl-NH+4 and MgAl-NH3 LDHs. MgAl-NH3 LDH enhances the ending temperature of the first degradation stage of PVC composites by 8°C compared with MgAl LDH. The LDH intercalated with CO(NH2)2 is proved to be an effective thermal stabilizer for PVC processing.