Targonski, S.D. and Pozar, D.M. (1994) Analysis and Design of a Microstrip Reflectarray Using Patches of Variable Size. Antennas and Propagation Society International Symposium, AP-S. Digest, June 1994, 1820-1823.

has been cited by the following article:

• TITLE: Improvement in Reflectarray Antenna Bandwidth with Changing the Geometrical Shape

  AUTHORS: Alireza Bayat, Vahid Soufi Niyaraki

  KEYWORDS: Increasing of Reflectarray Antenna Bandwidth, Non-Flat Reflectarray Antenna

  JOURNAL NAME: Open Journal of Antennas and Propagation, Vol.2 No.2, June 26, 2014

  ABSTRACT: The method of this paper is based on change in the geometrical shape of the reflectarray plane which is similar to a concave shape and with this changing, it is tried to make the incident waves orthogonal as much as possible in order to remove the phase error caused by incident wave variation. The other benefit of this work is omitting frequency change error caused by path difference between reflectarray antenna bandwidth. Two types of reflectarray antennas operating at X-band frequency with a linear polarization are considered in this design: concave and flat reflectarray antennas with the diameter of 135 mm. elements which are used in this paper are variable-size patches. The proposed reflectarray antenna (concave) approximately has 25% 3-dB bandwidth which shows an increment in bandwidth about 18% compared to flat reflectarray antenna.