[1]
|
R. J. Zhu, X. B. Wang, H. Y. Miao, X. F. Yang and Z. H. Huang, “Effect of Dimethoxy Methane and Exhaust Gas Recirculation on Combustion and Emission Characteristics of a Direct Injection Diesel Engine,” Fuel, Vol. 90, No. 5, 2011, pp. 1731-1737.
doi:10.1016/j.fuel.2011.01.035
|
[2]
|
Y. Akasaka and Y. Sakurai, “Effect of Oxygenated Fuel on Exhaust Emission from DI Diesel Engines,” JSME Transactions, Vol. 63, No. 609, 1996, pp. 1833-1899.
doi:10.1299/kikaib.63.1833
|
[3]
|
C. S. Cheung, R. J. Zhu and Z. H. Huang, “Investigation on the Gaseous and Particulate Emissions of a Compression Ignition Engine Fueled with Diesel-Dimethyl Carbonate Blends,” Science of the Total Environment, Vol. 409, No. 3, 2011, pp. 523-529.
doi:10.1016/j.scitotenv.2010.10.027
|
[4]
|
Y. Ren, Z. H. Huang, D. M. Jiang, L. X. Liu, K. Zeng, B. Liu and X. B. Wang, “Engine Performance and Emission Characteristics of a Compression Ignition Engine Fuelled with Diesel/Dimethoxy Methane Blends,” Proceedings of IMechE, Part D: Journal of Automobile Engineering, Vol. 219, 2005, pp. 905-914.
doi:10.1243/095440705X28367
|
[5]
|
Y. F. Gong, S. H. Liu, H. J. Guo, T. G. Hu and L. B. Zhou, “A New Diesel Oxygenate Additive and Its Effects on Engine Combustion and Emissions,” Applied Thermal Engineering, Vol. 27, No. 1, 2007, pp. 202-207.
doi:10.1016/j.applthermaleng.2006.04.021
|
[6]
|
M. Husnawan, H. H. Masjuki, T. M. I. Mahlia, S. Mekhilef and M. G. Saifullah, “Use of Post Flame Metal- Based and Oxygenated Additive Combination for Biodiesel-Diesel Blends,” Journal of Scientific and Industrial Research, Vol. 68, 2009, pp. 1049-1052.
|
[7]
|
S. C. Sorenson and S. E. Mikkelsen, “Performance and Emissions of a 0.2731 Direct Injection Diesel Engine Fueled with Neat Dimethyl Ether,” SAE Transactions, Vol. 104, 1995, pp. 80-90.
|
[8]
|
J. C. Ball, M. A. Gonzalez, C. Lapin and E. Linley, “Dimethoxy Methane in Diesel Fuel,” SAE Paper No. 2001- 01-3627.
|
[9]
|
W. Liu, Z. H. Haung, J. S. Wang, X. Q. Qiao and J. X. Hau, “Effects of Dimethoxy Methane Blended with Gas- to-Liquids on Particulate Matter Emissions from a Compression Ignition Engine,” Energy Fuel, Vol. 22, 2008, pp. 2307-2313. doi:10.1021/ef700735c
|
[10]
|
W. Momani, S. Abu-Ein, M. Momani and S. M. Fayyad, “Effects of Oxygenated Gasoline on Fuel and Air Mass Flow Rates and Air Fuel Ratio,” American Journal of Applied Sciences, Vol. 6, 2009, pp. 974-977.
doi:10.3844/ajassp.2009.974.977
|
[11]
|
N. Miyamoto and H. Ogawa, T. Arima, “Improvement of Diesel Combustion and Emissions with Addition of Various Oxygenated Agents to Diesel Fuels,” SAE Paper No. 962115, 1996.
|
[12]
|
I. Ahmed, “Oxygenated Diesel: Emissions and Performance Characteristics of Ethanol-Diesel Blends in CI Engines,” SAE Paper No. 2001-01-2474, 2001.
|
[13]
|
T. Nibin, A. P. Sathiyagnanam, S. Sivaprakasam and C. G. Saravanan, “Investigation on Emission Characteristics of a Diesel Engine Using Oxygenated Fuel Additive,” Journal of Institution of Engineers (India), Vol. 86, 2005, pp. 51-54.
|
[14]
|
M. N. Nabi, D. Kannan, J. E. Hustad and M. M. Rahman, “Role of Oxygenated Fuel to Reduce Diesel Emissions: A Review,” International Conference on Mechanical Engineering (ICME 2009), Dhaka, Bangladesh, 26-28 December 2009.
|
[15]
|
C. Bertolic, “Diesel Combustion Improvements by the Use of Oxygenated Synthetic Fuels,” SAE Paper No. 972972, 1997.
|
[16]
|
M. Iranmanesh, J. P. Subrahmanyam and M. K. J. Babu, “Potential of Diethyl Ether as a Blended Supplementary Oxygenated Fuel with Biodiesel to Improve Combustion and Emission Characteristics of Diesel Engines,” SAE Paper No. 2008-01-1805, 2008.
|