[1]
|
E. O. Hall, “Yield Point Phenomena in Metals and Alloys,” Plenum Press, New York, 1970.
|
[2]
|
Y. Sakai, “Strength of Heavily Cold Worked Two-Phase-Copper Alloy,” Materia Japan, Vol. 36, 1997, pp. 692-696.
|
[3]
|
T. G. Nieh and J. Wadsworth, “Hall-Petch Relation in Nanocrystalline Solid,” Scripta Metallurgica et Materialia, Vol. 25, No. 4, 1991, pp. 955-958. doi:10.1016/0956-716X(91)90256-Z
|
[4]
|
P. G. Sanders, J. A. Eastman and J. R. Weertman, “Elastic and Tensile Behavior of Nanocrystalline Copper and Palladium,” Acta Materialia, Vol. 45, No. 10, 1997, pp. 4019-4025. doi:10.1016/S1359-6454(97)00092-X
|
[5]
|
L. Lu, M. L. Sui and K. Lu, “Superplastic Extensibility of Nanocrystalline Copper at Room Temperature,” Science, Vol. 287, No. 5457, 2000, pp. 1463-1466. doi:10.1126/science.287.5457.1463
|
[6]
|
L. L. Shaw, “Processing Nanostructured Materials: An Overview,” JOM Journal of the Minerals, Metals and Materials Society, Vol. 52, No. 12, 2000, pp. 41-45. doi:10.1007/s11837-000-0068-2
|
[7]
|
Y. Saito, H. Utsunomiya, N. Tsuji and T. Sakai, “Novel ultra-High Straining Process for Bulk Materials- Development of the Accumulative Roll-Bonding (ARB) Process,” Acta Materialia, Vol. 47, No. 2, 1999, pp. 579-583.doi:10.1016/S1359-6454(98)00365-6
|
[8]
|
Z. Horita, D. J. Smith, M. Furukawa, M. Nemoto, R. Z. Valiv and T. G. Langdon, “An Investigation of Grain Boundaries in Submicrometer-Grained Al-Mg Solid Solution Alloys Using High – Resolution Electron Microscope,” Journal of Materials Research, Vol. 11, No. 8, 1996, pp. 1880-1890. doi:10.1557/JMR.1996.0239
|
[9]
|
A. Belyakov, W. Gao, H. Miura and T. Sakai, “Strain-Induced Grain Evolution in Polycrystalline Copper during Warm Deformation,” Metallurgical and Materials Transactions A, Vol. 29, No. 12, 1998, pp. 2957-2965. doi:10.1007/s11661-998-0203-1
|
[10]
|
G. Wang, S. D. Wu, L. Zuo, C. Esling, Z. G. Wang and G. Y. Li, “Microstructure, texture, Grain Boundaries in Recrystallization Regions in Pure Cu ECAE Samples,” Materials Science and Engineering A, Vol. 346, No. 1-2, 2003, pp. 83-90. doi:10.1016/S0921-5093(02)00521-X
|
[11]
|
H. Yamamoto and N. Inakazu, “On the Relation between Drawing Ratio and Mechanical Properties for Copper Wire,” Journal of the Japan Copper and Brass Research Association, Vol. 11, 1974, pp. 133-141.
|
[12]
|
N. Inakazu and H. Kawakami, “Drawing,” In: H. Tanaka, Ed., The Japan Society of Technology of Plasticity, Corona Publishing Co. Ltd., Tokyo, 1994, pp. 80-86.
|
[13]
|
V. Randle, “Grain Boundary Engineering: An Overview after 25 Years,” Materials Science and Technology, Vol. 36, No. 3, 2010, pp. 253-261. doi:10.1179/026708309X12601952777747
|
[14]
|
L. N. Brewer, M. A. Othon, L. M. Young and T. M. Angeliu, “Misorientation mapping for Visualization of Plastic Deformation via Electron Back-Scattered Diffraction,” Microscopy and Microanalysis, Vol. 12, No. 1, 2006, pp. 85-91. doi:10.1017/S1431927606060120
|
[15]
|
M. A. Arafin and J. A. Szpunar, “Modeling of grain Boundary Character Reconstruction and Predicting Intergranular Fracture Susceptibility of Texture and Random Polycrystalline,” Computional Matterials Science, Vol. 50, No. 2, 2010, pp. 656-665. doi:10.1016/j.commatsci.2010.09.031
|
[16]
|
T. Watanabe, “The Impact of Grain Boundary Character Distribution on Fracture in Polycrystals,” Material Science and Engineering A, Vol. 176, No. 1-2, 1994, pp. 39-49. doi:10.1016/0921-5093(94)90957-1
|
[17]
|
N. Brown, “The Dependence of Wire Texture in FCC Metals on Stacking Fault Energy,” Transactions of Metallization Society AIME, Vol. 221, 1969, pp. 236-238.
|
[18]
|
N. Inakazu and H. Yamamoto, “A Study on the Process of Fiber Texture Formation in Aluminium,” The Japan Institution of Metals, Vol. 37, 1973, pp. 1224-1229.
|
[19]
|
N. Inakazu, “Metal Drawing,” Kindai Hensyu Publishing Co. Ltd., Tokyo, 1985, p. 157.
|