[1]
|
K. Iwakiri, M. Furukawa, S. Ibaraki and I. Tomita, “Unsteady and 3D Flow Phenomena in Transonic Centrifugal Compressor Impeller at Rotating Stall,” Proceedings of ASME Turbo Expo, Orlando, Florida, 8-12 June 2009. www.teurbexpo.org
|
[2]
|
R. Kurz, “Surge Control Design System Design,” Proceedings of ASME Turbo Expo, Orlando, Florida, 8-12 June 2009. www.teurbexpo.org
|
[3]
|
J.-L. Lu, W. Chu and K. Peng, “Nu-merical and Experimental Research of Stall Inception on Sub-sonic Axial Flow Compressor Rotor,” Journal of Aerospace Engineering, Vol. 48, No. 2, 2010, pp. 3-4.
|
[4]
|
T. Okada, A. Kawajiri, O. Yataka and O. Eisuke, “Stall Inception Process and Prospects for active Hub-Flap control in Three Stage axial flow compressor,” Journal of Thermal Science, Co-Published with Springer-Varlag GmbH, 2008, pp. 4-8.
|
[5]
|
E. A. Ogbonaya, “Modeling Vibration-Based Faults in Rotor Shaft of Gas Turbine,” Ph.D. Dessertation, Depart- ment of Marine Engineering, Nigeria, 2004, pp. 20-22, 92-95, 180-181.
|
[6]
|
J. Huabing, Y. Wei, L. Yagun and L. Quishi, “Experi- mental Investigation of the Influence of Inlet Distortion on the Stall Inception in a Low Speed Axial Compre- ssor,” Proceedings of ASME Turbo Expo, Orlando, Florida, 8-12 June 2009. www.Teurbex-po.org
|
[7]
|
S. S. Rao, “Mechanical Vibration,” 4th Edition, Pvt Ltd., Dorling Kingsley, Licenses of Pearson Education in South Asia.
|
[8]
|
C. B. Meher-Homji, M. Chaker and A. E. Brouley, “The Fouling of Axial Flow Compres-sor-Causes, Effects Susceptibility and Sensitivity,” Proceedings of ASME Turbo Expo, Orlando, Florida, 8-12 June 2009. www.teurbexpo. org
|
[9]
|
M. Morini, M. Pinelli, P. R. Spina and M. Venturini, “Influence of Blade Deterioration on Com-pressor and Turbine Performance,” ASME Paper GT2008-50043, 2008.
|
[10]
|
T. W. Song, J. L. Sohn, T. S. Kim and T. R. O. Sung, “An Improved Analytic Model to Predict Fouling Phenomena in the Axial Flow Compressor of Gas Tur-bine Engines,” Proceedings of the International Gas Turbine Congress, Tokyo, 2-7 November 2003.
|
[11]
|
A. D. Mezherisky and A. V. Sudarev, “The Mechanism of Fouling and the Cleaning Technique in Application to Flow Parts of Power Generation Plant Compressors,” ASME Paper 90-GT-103, 1990.
|
[12]
|
C. B. Meher-Homji, “Gas Turbine Axial Compres-sor Fouling: A Unified Treatment of its Effect, Detection and Control,” International Journal of Turbo and Jet Engines, Vol. 9, No. 4, 1992, pp. 99-111.
|
[13]
|
E. D. Bently, C. T. Hatch and B. Grissom, “Fundamental of Rotating Machinery Diagnostics,” Bentley Pressurized Bearing Press, Minden, 2002.
|
[14]
|
E. A. Ogbonnaya and K. T. Johnson, “Modeling Vibrational Effects of Surge and Stall on GT Compressor,” Journal of International Research and Development Institute, 2010, pp. 142-146.
|
[15]
|
N. S. V. K. Rao, “Mechanical Vibration of Elastic Systems,” 1st Edition, Asian Books Private Limited, Mahavirlane, Vardhan House, Darya Lzanj, New Delhi, 2006.
|
[16]
|
R. V. Dukkipati and J. Srivinas, “Textbook of Mechanical Vibrations,” 3rd Edition, Prentice-Hall of India Private Limited, Connaught Circus, New Delhi, 2007.
|
[17]
|
P. B. Ferdinand and R. E. Jr. Johnston, “Vector Mechanics for Engineers: Static and Dynamic,” 6th Edition, McGraw-Hill Companies Inc., Boston, 2004.
|