[1]
|
X. Li, L. G. Tabil, S. Panigrahi and W. J. Crerar, “Processing Flax Fiber-Reinforced Polymer Composites by Injection Molding,” CSAE/SCGR 2005 Meeting Winnipeg, Winnipeg, 26-29 June 2005, pp. 1-8.
|
[2]
|
M. Tajvidi1, R. H. Falk and J. C. Hermanson, “Effect of Natural Fibers on Thermal and Mechanical Properties of Natural Fiber Polypropylene Composites Studied by Dynamic Mechanical Analysis,” Journal of Applied Polymer Science, Vol. 101, No. 6, 2006, pp. 4341-4349.
doi:10.1002/app.24289
|
[3]
|
M. S. Sobhy and M. T. Tammam, “The Influence of Fiber Length and Concentration on Physical Properties of Wheat Husk Fibers Rubber Composites”, International Journal of Polymer Science. Vol. 2010, 2010, Article ID: 528173.
doi:10.1155/2010/528173
|
[4]
|
J. Mirbagheri, M. Tajvidi, J. C. Hermanson and I. Ghasemi, “Tensile Properties of Wood Flour/Kenaf Fibre Polypropylene Hybrid Composites,” Journal of Applied Polymer Science, Vol.105, No. 5, 2007, pp. 3054-3059.
doi:10.1002/app.26363
|
[5]
|
L. Y. Mwaikambo and M. P. Ansell, “The Effect of Chemical Treatment on the Properties of Hemp, Sisal, Jute and Kapok Fibres for Composite Reinforcement,” Die Angewandte Makromolekulare Chemie, Vol. 272, No. 1, 1999, pp. 108-116.
doi:10.1002/(SICI)1522-9505(19991201)272:1<108::AID-APMC108>3.0.CO;2-9
|
[6]
|
A. K. Bledzki and O. Farukh, “Wood Fibre Reinforced Polypropylene Composites: Effect of Fibre Geometry and Coupling Agent on Physico-Mechanical Properties,” Applied Composite Materials, Vol. 10, No. 6, 2003, pp. 365-379. doi:10.1023/A:1025741100628
|
[7]
|
R. M. Rowell, et al., “Utilization of Natural Fibers in Plastic Composites, Problems and Opportunities,” Journal of Thermoplastic Composites Materials, Vol. 15, No. 4, 1997, pp. 281-300.
|
[8]
|
H.-S. Kim, B.-H. Lee, S.-W. Choi, S. Kim and H.-J. Kim, “The Effect of Types of Maleic Anhydride-Grafted Polypropylene (MAPP) on the interfacial Adhesion Properties of Bio-Flour-Filled Polypropylene Composites” Composites Part A, Vol. 38, 2007, pp. 1473-1482.
doi:10.1016/j.compositesa.2007.01.004
|
[9]
|
H.-S. Kim, S. Kim, H.-J. Kim and H.-S. Yang, “Thermal Properties of Bio-Flour-Filled Polyolefin Composites with Different Compatibilizing Agent Type and Content,” Thermochimica Acta, Vol. 451, No. 1-2, 2006, pp. 181-188.
doi:10.1016/j.tca.2006.09.013
|
[10]
|
N. Islam, R. Rahman, M. Haque and M. Huque, “Treated Coir Reinforced Polypropylene Composites,” Composites Part A, Vol. 41, No. 2, 2010, pp. 192-198.
doi:10.1016/j.compositesa.2009.10.006
|
[11]
|
A. K. Bledzkia, M. Letmana, A. Viksneb and L. Rence, “A Comparison of Compounding Processes and Wood Type for Wood Fibre—PP Composites,” Composites Part A, Vol. 36, No. 6, 2005, pp. 789-797.
doi:10.1016/j.compositesa.2004.10.029
|
[12]
|
B. Wang, S. Panigrahi, L. Tabil, W. Crerar and S. Sokansanj, “Application of Pretreated Flax Fibres in Composites,” Written for Presentation at the CSAE/SCGR 2003 Meeting, Montréal, 6-9 July, 2003. Paper No. 3-357.
|
[13]
|
B. Wang, S. Panigrahi, L. Tabil, W. Crerar and S. Sokansanj, “Application of Pretreated Flax Fibres in Composites,” Written for Presentation at the CSAE/SCGR 2003 Meeting, Montréal, 6-9 July, 2003. Paper No. 3-337.
|
[14]
|
S. M. L. Rosaa and E. F. Santosb, “Studies on the Properties of Rice-Husk-Filled-PP Composites—Effect of Maleated,” Materials Research, Vol. 12, No. 3, 2009, pp. 333-338.
|
[15]
|
H.-S. Yang, H.-J. Kim, H.-J. Park, B.-J. Lee and T.-S. Hwang, “Effect of Compatibilizing Agents on Rice-Husk Flour Reinforced Polypropylene Composites”, Composite Structures, Vol. 77, No. 1, 2007, pp.45-55.
doi:10.1016/j.compstruct.2005.06.005
|
[16]
|
M. E Sakhawy and M. L. Hassan, “Physical and Mechanical Properties of Microcrystalline Cellulose Prepared from Agricultural Residues,” Carbohydrate Polymers, Vol. 67, No. 1, 2007, pp. 1-10.
doi:10.1016/j.carbpol.2006.04.009
|
[17]
|
B. R.Guduri, C. Khoathane, R. D. Anandjiwala, A. De Vries, E. R.Sadiku and L. Van Wyk, “Effect of Water Absorption on Mechanical Properties of Flax Fibre Reinforced Composites,” International Conference on Composite Science and Technology (ICCST6), Durban, 22-24 January 2007, pp. 1-10.
|
[18]
|
L. Dányádi, J. Móczó and B. Pukánszky, “Effect of Various Surface Modifications of Wood Flour on the Properties of PP/Wood Composites,” Composite Part A, Vol. 41, No. 2, 2010, pp. 199-206.
doi:10.1016/j.compositesa.2009.10.008
|
[19]
|
N. Stark, “Influence of Moisture Absorption on Mechanical Properties of Wood Flour-Polypropylene Composites,” Journal of Thermoplastic Composite Materials, Vol. 14, No. 5, 2001, pp. 421-432.
doi:10.1106/UDKY-0403-626E-1H4P
|
[20]
|
A. K. Bledzki, A. A. Mamuna and J. Volk, “Physical, Chemical and Surface Properties of Wheat Husk, Rye Husk and Soft Wood and Their Polypropylene Composites,’’ Composites Part A, Vol. 41, 2010, pp. 480-488.
doi:10.1016/j.compositesa.2009.12.004
|