Share This Article:

Influence of Substrate Bias Voltage on the Properties of Sputtered Aluminum-Scandium Thin Sheets

Abstract Full-Text HTML Download Download as PDF (Size:1127KB) PP. 115-119
DOI: 10.4236/jsemat.2012.22018    4,466 Downloads   7,974 Views   Citations

ABSTRACT

Thin sheets (20 μm - 30 μm) of an aluminum-scandium alloy were manufactured by magnetron sputtering with a homogeneous thickness distribution. The influence of bias voltage on the sheet properties was investigated. Steel sheets of 100 μm were employed as substrate and were coated in a dc magnetron sputtering unit fitted with a rectangular target of aluminum 2.0 w% scandium master alloy. After deposition, the substrates were dissolved in an oxidizing medium and thus freestanding aluminum-scandium thin films were obtained. The homogeneous thickness was achieved by a reciprocal movement of the substrate. The influence of a radio frequency bias voltage on the coating properties was investigated. The bias voltage resulted in an important coarsening of the columnar structure as well as an increase of the roughness and hardness. Additionally, a low bias voltage could intensively reduce the coating defect density without altering too much the sheet properties.

Conflicts of Interest

The authors declare no conflicts of interest.

Cite this paper

J. Kovac, H. Stock and H. Zoch, "Influence of Substrate Bias Voltage on the Properties of Sputtered Aluminum-Scandium Thin Sheets," Journal of Surface Engineered Materials and Advanced Technology, Vol. 2 No. 2, 2012, pp. 115-119. doi: 10.4236/jsemat.2012.22018.

References

[1] F. Vollertsen, Z. Hu, H. Schulze Niehoff and C. Theiler, “State of the Art in Micro Forming and Investigations into Micro Deep Drawing,” Journal of Materials Processing Technology, Vol. 151, No. 1-3, 2004, pp. 70-79. doi:10.1016/j.jmatprotec.2004.04.266
[2] F. Vollertsen, Z. Hu, H.-R. Stock and B. Koehler, “On the Limit Drawing Ratio of Magnetron Sputtered Aluminium-Scandium Foils within Micro Deep Drawing,” Production Engineering Research and Development, Vol. 4, No. 5, 2010, pp. 451-456.doi:10.1007/s11740-010-0229-2
[3] J. Royset and N. Ryum, “Scandium in Aluminium Alloys,” International Materials Reviews, Vol. 50, No. 1, 2005, pp. 19-44. doi:10.1179/174328005X14311
[4] K. Venkateswarlu, L. C. Pathak, A. K. Ray, G. Das, P. K. Verma, M. Kumar and R. N. Ghosch, “Microstructure, Tensile Strength and Wear Behavior of Al-Sc Alloy,” Materials Science and Engineering A, Vol. 383, No. 2, 2004, pp. 374-380. doi:10.1016/j.msea.2004.05.075
[5] H.-R. Stock, B. Koehler, H. Bomas and H.-W. Zoch, “Characteristics of Aluminium-Scandium Alloy Thin Sheets Obtained by Physical Vapor Deposition,” Materials and Design, Vol. 31, Suppl. 1, 2010, pp. S79-S81. doi:10.1016/j.matdes.2010.04.040
[6] B. Warcholinski, A. Gilewicz, J. Ratajski, Z. Kuklinski and J. Rochowicz, “An Analysis of Macroparticle-Related Defects on CrCN and CrN Coatings in Dependence of the Substrate Bias Voltage,” Vacuum, 2011, in press. doi:10.1016/j.vacuum.2011.04.023
[7] Q. Kong, L. Ji, H. Li, X. Liu, Y. Wang, J. Chen and H. Zhou, “Influence of Substrate Bias Voltage on the Microstructure and Residual Stress of CrN Films Deposited by Medium Frequency Magnetron Sputtering,” Materials Science and Engineering B, Vol. 176, No. 11, 2011, pp. 850-854. doi:10.1016/j.mseb.2011.04.015
[8] J. A. Thornton and D. W. Hoffman, “Stress-Related Effects in Thin Films,” Thin Solid Films, Vol. 171, No. 1, 1989, pp. 5-31. doi:10.1016/0040-6090(89)90030-8
[9] F. Ericson, N. Kris-tensen, J.-A. Schweitz and U. Smith, “A Transmission Electron Microscopy Study of Hillocks in Thin Aluminum Films,” Journal of Vacuum Science and Technology B, Vol. 9, No. 1, 1991, pp. 58-63. doi:10.1116/1.585790
[10] S.-J. Hwang, W. D. Nix and Y.-C. Joo, “A Model for Hillock Growth in Al Thin Films Controlled by Plastic Deformation,” ActaMateriala, Vol. 55, No. 15, 2007, pp. 5297-5503. doi:10.1016/j.actamat.2007.05.046
[11] R. E. Cuthrell, D. M. Mattox, C. R. Peeples, P. L. Dreike and K. P. Lamppa, “Residual Stress Anisotropy, Stress Control, and Re-sistivity in Post Cathode Magnetron Sputter Deposited Molybdenum Films,” Journal of Vacuum Science and Technology A, Vol. 6, No. 5, 1988, pp. 2914-2920. doi:10.1116/1.575451
[12] S.-L. Lee, J.-K. Chang, Y.-C. Cheng, K.-Y. Lee and W.-C. Chen, “Effects of Scandium Addi-tion on Electrical Resistivity and Formation of Thermal Hillocks in Aluminum Thin Films,” Thin Solid Films, Vol. 519, No. 11, 2011, pp. 3578-3581. doi:10.1016/j.tsf.2011.01.272

  
comments powered by Disqus

Copyright © 2019 by authors and Scientific Research Publishing Inc.

Creative Commons License

This work and the related PDF file are licensed under a Creative Commons Attribution 4.0 International License.