[1]
|
Bhave, P.P. and Kulkarni, N. (2015) Air Pollution and Control Legislation in India. Journal of the Institution of Engineers (India): Series A, 96, 259-265. https://doi.org/10.1007/s40030-015-0125-z
|
[2]
|
Ragothaman, A. and Anderson, W.A. (2017) Air Quality Impacts of Petroleum Refining and Petrochemical Industries. Environments, 4, Article No. 66.
|
[3]
|
Achudume, A.C. (2009) The Effect of Petrochemical Effluent on the Water Quality of Ubeji Creek in Niger Delta of Nigeria. Bulletin of Environmental Contamination and Toxicology, 83, 410-415. https://doi.org/10.3390/environments4030066
|
[4]
|
Choi, C.J., Berges, J.A. and Young, E.B. (2012). Rapid Effects of Diverse Toxic Water Pollutants on Chlorophyll a Fluorescence: Variable Responses among Freshwater Microalgae. Water Research, 46, 2615-2626. https://doi.org/10.1016/j.watres.2012.02.027
|
[5]
|
Wang, S., Xu, Y., Lin, Z., Zhang, J., Norbu, N. and Liu, W. (2017) The Harm of Petroleum-Polluted Soil and Its Remediation Research. AIP Conference Proceedings, 1864, Article ID: 020222. https://doi.org/10.1063/1.4993039
|
[6]
|
UN Environment Programme (2018) Plastic Planet: How Tiny Plastic Particles Are Polluting Our Soil. UN Environment Programme: News & Stories. https://www.unep.org/news-and-stories/story/plastic-planet-how-tiny-plastic-particles-are-polluting-our-soil
|
[7]
|
Flaris, V. and Singh, G. (2009) Recent Developments in Biopolymers. Journal of Vinyl and Additive Technology, 15, 1-11. https://doi.org/10.1002/vnl.20171
|
[8]
|
Tang, X.Z., Kumar, P., Alavi, S. and Sandeep, K.P. (2012) Recent Advances in Biopolymers and Biopolymer-Based Nanocomposites for Food Packaging Materials. Critical Reviews in Food Science and Nutrition, 52, 426-442. https://doi.org/10.1080/10408398.2010.500508
|
[9]
|
Heinrich, L.A. (2019) Future Opportunities for Bio-Based Adhesives-Advantages beyond Renewability. Green Chemistry, 21, 1866-1888. https://doi.org/10.1039/C8GC03746A
|
[10]
|
Haag, A.P., Maier, R.M., Combie, J. and Geesey, G.G. (2004) Bacterially Derived Biopolymers as Wood Adhesives. International Journal of Adhesion and Adhesives, 24, 495-502. https://doi.org/10.1016/j.ijadhadh.2004.01.004
|
[11]
|
Kruger, L. and Lacourse, N. (1990) Starch Based Adhesives. In: Skeist, I., Ed., Handbook of Adhesives, Springer, Boston, 153-166. https://doi.org/10.1007/978-1-4613-0671-9_8
|
[12]
|
Dhawale, P.V., Vineeth, S.K., Gadhave, R.V. and Mahanwar, P.A. (2021) Cellulose Stabilized Polyvinyl Acetate Emulsion: Review. Open Journal of Organic Polymer Materials, 11, 51-66. https://doi.org/10.4236/ojopm.2021.112002
|
[13]
|
Luo, X. and Shuai, L. (2020) Lignin-Based Adhesives. In: Inamuddin, Boddula, R., Ahamed, M.I. and Asiri, A.M., Eds., Green Adhesives, John Wiley & Sons, Hoboken, 25-56. https://doi.org/10.1002/9781119655053.ch2
|
[14]
|
Zhou, X. and Du, G. (2020) Applications of Tannin Resin Adhesives in the Wood Industry. In: Aires, A., Ed., Tannins-Structural Properties, Biological Properties and Current Knowledge, IntechOpen, London, 1-19. https://doi.org/10.5772/intechopen.86424
|
[15]
|
Gadhave, R.V., Vineeth, S.K., Dhawale, P.V. and Gadekar, P.T. (2020) Effect of Boric Acid on Poly Vinyl Alcohol-Tannin Blend and Its Application as Water-Based Wood Adhesive. Designed Monomers and Polymers, 23, 188-196. https://doi.org/10.1080/15685551.2020.1826124
|
[16]
|
Shybi, A.A., Varghese, S. and Thomas, S. (2021) Natural Rubber Latex-Based Adhesives: Role of Nanofillers. Journal of Adhesion Science and Technology, 35, 406-418. https://doi.org/10.1080/01694243.2020.1806613
|
[17]
|
Zeng, Y., et al. (2021) Soy Protein-Based Adhesive with Superior Bonding Strength and Water Resistance by Designing Densely Crosslinking Networks. European Polymer Journal, 142, Article ID: 110128. https://doi.org/10.1016/j.eurpolymj.2020.110128
|
[18]
|
Vnučec, D., Kutnar, A. and Goršek, A. (2017) Soy-Based Adhesives for Wood-Bonding—A Review. Journal of Adhesion Science and Technology, 31, 910-931. https://doi.org/10.1080/01694243.2016.1237278
|
[19]
|
Lei, H., Du, G., Wu, Z., Xi, X. and Dong, Z. (2014) Cross-Linked Soy-Based Wood Adhesives for Plywood. International Journal of Adhesion and Adhesives, 50, 199-203. https://doi.org/10.1016/j.ijadhadh.2014.01.026
|
[20]
|
Mitachi, S., Hagiwara, A., Murata, N., Kojima, D., Falco, G. and Mija, A. (2015) Eco-Friendly Optical Adhesives Based onVegetable Oil Thermosets. Journal of The Adhesion Society of Japan, 51, 279-285, https://doi.org/10.11618/adhesion.51.279
|
[21]
|
Sulaiman, N.S., Hashim, R., Sulaiman, O., Nasir, M., Amini, M.H.M. and Hiziroglu, S. (2018) Partial Replacement of Urea-Formaldehyde with Modified Oil Palm Starch Based Adhesive to Fabricate Particleboard. International Journal of Adhesion and Adhesives, 84, 1-8. https://doi.org/10.1016/j.ijadhadh.2018.02.002
|
[22]
|
Jang, Y., Huang, J. and Li, K. (2011) A New Formaldehyde-Free Wood Adhesive from Renewable Materials. International Journal of Adhesion and Adhesives, 31, 754-759. https://doi.org/10.1016/j.ijadhadh.2011.07.003
|
[23]
|
Prasittisopin, L. and Li, K. (2010) A New Method of Making Particleboard with a Formaldehyde-Free Soy-Based Adhesive. Composites Part A: Applied Science and Manufacturing, 41, 1447-1453. https://doi.org/10.1016/j.compositesa.2010.06.006
|
[24]
|
Pizzi, A. (2006) Recent Developments in Eco-Efficient Bio-Based Adhesives for Wood Bonding: Opportunities and Issues. Journal of Adhesion Science and Technology, 20, 829-846. https://doi.org/10.1163/156856106777638635
|
[25]
|
Heinrich, L.A. (2019) Future Opportunities for Bio-Based Adhesives-Advantages beyond Renewability. Green Chemistry, 21, 1866-1888. https://doi.org/10.1039/C8GC03746A
|
[26]
|
Klemm, D., Heublein, B., Fink, H.P. and Bohn, A. (2005) Cellulose: Fascinating Biopolymer and Sustainable Raw Material. Angewandte Chemie International Edition, 44, 3358-3393. https://doi.org/10.1002/anie.200460587
|
[27]
|
Stenstad, P., Andresen, M., Tanem, B.S. and Stenius, P. (2008) Chemical Surface Modifications of Microfibrillated Cellulose. Cellulose, 15, 35-45. https://doi.org/10.1007/s10570-007-9143-y
|
[28]
|
Kalia, S., et al. (2011) Cellulose-Based Bio- and Nanocomposites: A Review. International Journal of Polymer Science, 2011, Article ID: 837875. https://doi.org/10.1155/2011/837875
|
[29]
|
Moon, R.J., Martini, A., Nairn, J., Simonsen, J. and Youngblood, J. (2011) Cellulose Nanomaterials Review: Structure, Properties and Nanocomposites. Chemical Society Reviews, 40, 3941-3994. https://doi.org/10.1039/c0cs00108b
|
[30]
|
Singh, H.K., Patil, T., Vineeth, S.K., Das, S., Pramanik, A. and Mhaske, S.T. (2019). Isolation of Microcrystalline Cellulose from Corn Stover with Emphasis on Its Constituents: Corn Cover and Corn Cob. Materials Today: Proceedings, 27, 589-594. https://doi.org/10.1016/j.matpr.2019.12.065
|
[31]
|
Masoodia, R., El-Hajjar, R.F., Pillai, K.M. and Sabo, R. (2012) Mechanical Characterization of Cellulose Nanofiber and Bio-Based Epoxy Composite. Materials & Design, 36, 570-576. https://doi.org/10.1016/j.matdes.2011.11.042
|
[32]
|
Jang, J.Y., Jeong, T.K., et al. (2012) Thermal Stability and Flammability of Coconut Fiber Reinforced Poly(Lactic Acid) Composites. Composites Part B: Engineering, 43, 2434-2438. https://doi.org/10.1016/j.compositesb.2011.11.003
|
[33]
|
Canche-Escamilla, G., Rodriguez-Laviada, J., Cauich-Cupul, J.I., Mendizabal, E., et al. (2002) Flexural, Impact and Compressive Properties of a Rigid-Thermoplastic Matrix/Cellulose Fiber Reinforced Composites. Composites Part A: Applied Science and Manufacturing, 33, 539-549. https://doi.org/10.1016/S1359-835X(01)00136-1
|
[34]
|
Sdrobis, A., Darie, R.N., et al. (2012) Low Density Polyethylene Composites Containing Cellulose Pulp Fibers. Composites Part B: Engineering, 43, 1873-1880. https://doi.org/10.1016/j.compositesb.2012.01.064
|
[35]
|
Kowalczyk, M., Piorkowska, E., Kulpinski, P. and Pracella, M. (2011) Mechanical and Thermal Properties of PLA Composites with Cellulose Nanofibers and Standard Size Fibers. Composites Part A: Applied Science and Manufacturing, 42, 1509-1514. https://doi.org/10.1016/j.compositesa.2011.07.003
|
[36]
|
Shi, Q.F., Zhou, C.G., Yue, Y.Y., et al. (2012) Mechanical Properties and in Vitro Degradation of Electrospun Bio-Nanocomposite Mats from PLA and Cellulose Nanocrystals. Carbohydrate Polymers, 90, 301-308. https://doi.org/10.1016/j.carbpol.2012.05.042
|
[37]
|
Avella, M., Martuscelli, E. and Pascucci, B. (2012) Flexural Properties Loss of Unidirectional Epoxy/Fique Composites Immersed in Water and Alkaline Medium for Construction Application. Composites Part B: Engineering, 43, 3120-3130. https://doi.org/10.1016/j.compositesb.2012.04.027
|
[38]
|
Houde, A.Y. and Stern, S.A. (1997) Solubility and Diffusivity of Light Gases in Ethyl Cellulose at Elevated Pressures Effects of Ethoxy Content. Journal of Membrane Science, 127, 171-183. https://doi.org/10.1016/S0376-7388(96)00266-9
|
[39]
|
Kabir, M.M., Wang, H., et al. (2012) Mechanical Properties of Chemically-Treated Hemp Fibre Reinforced Sandwich Composites. Composites Part B: Engineering, 43, 159-169. https://doi.org/10.1016/j.compositesb.2011.06.003
|
[40]
|
Lin, X., Chen, S.Y., Hu, W.L., et al. (2009) In Situ Synthesis of CdS Nanoparticles on Bacterial Cellulose Nanofibers. Carbohydrate Polymers, 76, 509-512. https://doi.org/10.1016/j.carbpol.2008.11.014
|
[41]
|
Pandey, J.K., Takagi, H., et al. (2012) An Overview on the Cellulose Based Conducting Composites. Composites Part B: Engineering, 43, 2822-2866. https://doi.org/10.1016/j.compositesb.2012.04.045
|
[42]
|
He, J., Kunitake, T. and Nakao, A. (2003) Facile in Situ Synthesis of Noble Metal Nanoparticles in Porous Cellulose Fibers. Chemistry of Materials, 15, 4401-4406. https://doi.org/10.1021/cm034720r
|
[43]
|
Khulbe, K.C., Matsuura, T. and Feng, C.Y. (2002) Study on Cellulose Acetate Membranes for Reverse Osmosis and Polyethersulfone Membranes for Ultrafiltration by Electron Spin Resonance Technique. Desalination, 148, 329-332. https://doi.org/10.1016/S0011-9164(02)00725-7
|
[44]
|
Lu, T., Jiang, M., Jiang, Z., Hui, D., Wang, Z. and Zhou, Z. (2013) Effect of Surface Modification of Bamboo Cellulose Fibers on Mechanical Properties of Cellulose/Epoxy Composites. Composites Part B: Engineering, 51, 28-34. https://doi.org/10.1016/j.compositesb.2013.02.031
|
[45]
|
Vineeth, S.K., Gadhave, R.V and Gadekar, P.T. (2019) Nanocellulose Applications in Wood Adhesives—Review. Open Journal of Polymer Chemistry, 9, 63-75. https://doi.org/10.4236/ojpchem.2019.94006
|
[46]
|
Veigel, S., Rathke, J., Weigl, M. and Gindl-Altmutter, W. (2012) Particle Board and Oriented Strand Board Prepared with Nanocellulose-Reinforced Adhesive. Journal of Nanomaterials, 2012, Article ID: 158503. https://doi.org/10.1155/2012/158503
|
[47]
|
Mahrdt, E., Pinkl, S., Schmidberger, C., van Herwijnen, H.W.G., Veigel, S. and Gindl-Altmutter, W. (2016) Effect of Addition of Microfibrillated Cellulose to Urea-Formaldehyde on Selected Adhesive Characteristics and Distribution in Particle Board. Cellulose, 23, 571-580. https://doi.org/10.1007/s10570-015-0818-5
|
[48]
|
Tayeb, A.H., Amini, E., Ghasemi, S. and Tajvidi, M. (2018) Cellulose Nanomaterials—Binding Properties and Applications: A Review. Molecules, 23, Article ID: 2684.
|
[49]
|
Grüneberger, F., Künniger, T., Zimmermann, T. and Arnold, M. (2014) Nanofibrillated Cellulose in Wood Coatings: Mechanical Properties of Free Composite Films. Journal of Materials Science, 49, 6437-6448. https://doi.org/10.1007/s10853-014-8373-2
|
[50]
|
Dastjerdi, Z., Cranston, E.D. and Dubé, M.A. (2018) Pressure Sensitive Adhesive Property Modification Using Cellulose Nanocrystals. International Journal of Adhesion and Adhesives, 81, 36-42. https://doi.org/10.1016/j.ijadhadh.2017.11.009
|
[51]
|
Veigel, S., Müller, U., Keckes, J., Obersriebnig, M. and Gindl-Altmutter, W. (2011) Cellulose Nanofibrils as Filler for Adhesives: Effect on Specific Fracture Energy of Solid Wood-Adhesive Bonds. Cellulose, 18, 1227-1237. https://doi.org/10.1007/s10570-011-9576-1
|
[52]
|
Gindl-Altmutter, W. and Veigel, S. (2014) Nanocellulose-Modified Wood Adhesives. In: Oksman, K., Mathew, A.P., Bismarck, A., Rojas, O. and Sain, M., Eds., Handbook of Green Materials, World Scientific Publishing, Singapore, 253-264. https://doi.org/10.1142/9789814566469_0031
|
[53]
|
Cataldi, A., Berglund, L., Deflorian, F. and Pegoretti, A. (2015) A Comparison between Micro- and Nanocellulose-Filled Composite Adhesives for Oil Paintings Restoration. Nanocomposites, 1, 195-203. https://doi.org/10.1080/20550324.2015.1117239
|
[54]
|
Tajvidi, M., Gardner, D.J. and Bousfield, D.W. (2016) Cellulose Nanomaterials as Binders: Laminate and Particulate Systems. Journal of Renewable Materials, 4, 365-376. https://doi.org/10.7569/JRM.2016.634103
|
[55]
|
Jiang, W., Haapala, A., Tomppo, L., Pakarinen, T., Sirviō, J.A. and Liimatainen, H. (2018) Effect of Cellulose Nanofibrils on the Bond Strength of Polyvinyl Acetate and Starch Adhesives for Wood. BioResources, 13, 2283-2292. https://doi.org/10.15376/biores.13.2.2283-2292
|
[56]
|
López-Suevos, F., Eyholzer, C., Bordeanu, N. and Richter, K. (2010) DMA Analysis and Wood Bonding of PVAc Latex Reinforced with Cellulose Nanofibrils. Cellulose, 17, 387-398. https://doi.org/10.1007/s10570-010-9396-8
|
[57]
|
Kaboorani, A., Riedl, B., Blanchet, P., Fellin, M., Hosseinaei, O. and Wang, S. (2012) Nanocrystalline Cellulose (NCC): A Renewable Nano-Material for Polyvinyl Acetate (PVA) Adhesive. European Polymer Journal, 48, 1829-1837. https://doi.org/10.1016/j.eurpolymj.2012.08.008
|
[58]
|
Cui, J., et al. (2015) Enhancement of Mechanical Strength of Particleboard Using Environmentally Friendly Pine (Pinus pinaster L.) Tannin Adhesives with Cellulose Nanofibers. Annals of Forest Science, 72, 27-32. https://doi.org/10.1007/s13595-014-0392-2
|
[59]
|
Zhang, H., Zhang, J., Song, S., Wu, G. and Pu, J. (2011) Modified Nanocrystalline Cellulose from Two Kinds Emission and Bonding Strength of Urea-Fromaldehyde Resin Adhesive. BioResources, 6, 4430-4438.
|
[60]
|
Gao, Q., Li, J., Shi, S.Q., Liang, K. and Zhang, X. (2012) Soybean Meal-Based Adhesive Reinforced with Cellulose Nano-Whiskers. BioResources, 7, 5622-5633. https://doi.org/10.15376/biores.7.4.5622-5633
|
[61]
|
Kojima, Y., et al. (2013) Binding Effect of Cellulose Nanofibers in Wood Flour Board. Journal of Wood Science, 59, 396-401. https://doi.org/10.1007/s10086-013-1348-0
|
[62]
|
Kojima, Y., et al. (2014) Evaluation of Binding Effects in Wood Flour Board Containing Ligno-Cellulose Nanofibers. Materials (Basel), 7, 6853-6864.
|
[63]
|
Ayrilmis, N., Lee, Y.K., Kwon, J.H., Han, T.H. and Kim, H.J. (2016) Formaldehyde Emission and VOCs from LVLs Produced with Three Grades of Urea-Formaldehyde Resin Modified with Nanocellulose. Building and Environment, 97, 82-87. https://doi.org/10.1016/j.buildenv.2015.12.009
|
[64]
|
Via, B.K., Fasina, O. and Atta-Obeng, E. (2012) Effect of Microcrystalline Cellulose, Species, and Particle Size on Mechanical and Physical Properties of Particleboard. Wood and Fiber Science, 44, 227-235.
|
[65]
|
Hunt, J.F., Leng, W. and Tajvidi, M. (2017) Vertical Density Profile and Internal Bond Strength of Wet-Formed Particleboard Bonded with Cellulose Nanofibrils. Wood and Fiber Science, 49, 413-423.
|
[66]
|
Diop, C.I.K., Tajvidi, M., Bilodeau, M.A., Bousfield, D.W. and Hunt, J.F. (2017) Evaluation of the Incorporation of Lignocellulose Nanofibrils as Sustainable Adhesive Replacement in Medium Density Fiberboards. Industrial Crops and Products, 109, 27-36. https://doi.org/10.1016/j.indcrop.2017.08.004
|
[67]
|
Amini, E., Tajvidi, M., Gardner, D.J. and Bousfield, D.W. (2017) Utilization of Cellulose Nanofibrils as a Binder for Particleboard Manufacture. BioResources, 12, 4093-4110. https://doi.org/10.15376/biores.12.2.4093-4110
|
[68]
|
Cheng, H.N., Kilgore, K., Ford, C., Fortier, C., Dowd, M.K. and He, Z. (2019) Cottonseed Protein-Based Wood Adhesive Reinforced with Nanocellulose. Journal of Adhesion Science and Technology, 33, 1357-1368. https://doi.org/10.1080/01694243.2019.1596650
|
[69]
|
Oh, M., Ma, Q., Simsek, S., Bajwa, D. and Jiang, L. (2019) Comparative Study of Zein- and Gluten-Based Wood Adhesives Containing Cellulose Nano Fibers and Crosslinking Agent for Improved Bond Strength. International Journal of Adhesion and Adhesives, 92, 44-57. https://doi.org/10.1016/j.ijadhadh.2019.04.004
|
[70]
|
Zhang, H., Liu, P., Musa, S., Mai, C. and Zhang, K. (2019) Dialdehyde Cellulose as a Bio-Based Robust Adhesive for Wood Bonding. ACS Sustainable Chemistry & Engineering, 7, 10452-10459. https://doi.org/10.1021/acssuschemeng.9b00801
|
[71]
|
Kwon, J.H., Lee, S.H., Ayrilmis, N. and Han, T.H. (2015) Tensile Shear Strength of Wood Bonded with Urea-Formaldehyde with Different Amounts of Microfibrillated Cellulose. International Journal of Adhesion and Adhesives, 60, 88-91.
|
[72]
|
Chen, H., Nair, S.S., Chauhan, P. and Yan, N. (2019) Lignin Containing Cellulose Nanofibril Application in pMDI Wood Adhesives for Drastically Improved Gap-Filling Properties with Robust Bondline Interfaces. Chemical Engineering Journal, 360, 393-401. https://doi.org/10.1016/j.cej.2018.11.222
|
[73]
|
Salon, M.C.B., Bayle, P.A., Abdelmouleh, M., Boufi, S. and Belgacem, M.N. (2008) Kinetics of Hydrolysis and Self-Condensation Reaction of Silanes by NMR Spectroscopy. Colloids and Surfaces A: Physicochemical and Engineering Aspects, 312, 83-91. https://doi.org/10.1016/j.colsurfa.2007.06.028
|
[74]
|
Donath, S., Militz, H. and Mai, C. (2006) Creating Water-Repellent Effects on Wood Bytreatment with Silanes. Holzforschung, 60, 40-46.
|
[75]
|
Abdelmouleh, M., Boufi, S., ben Salah, A., Belgacem, M.N. and Gandini, A. (2002) Interaction Ofsilane Coupling Agents with Cellulose. Langmuir, 18, 3203-3208. https://doi.org/10.1021/la011657g
|
[76]
|
Averous, L. (2009) Biodegradable Polymer Blends and Composites from Renewable Resources. Macromolecular Chemistry and Physics, 210, 890. https://doi.org/10.1002/macp.200900141
|
[77]
|
Bledzki, A.K., Reihmane, S. and Gassan, J. (1996) Properties and Modification Methods for Vegetable Fibers for Natural Fiber Composites. Journal of Applied Polymer Science, 59, 1329-1336. https://doi.org/10.1002/(SICI)1097-4628(19960222)59:8<1329::AID-APP17>3.0.CO;2-0
|
[78]
|
Hornsby, P.R., Hinrichsen, E. and Tarverdi, K. (1997) Preparation and Properties of Polypropylene Composites Reinforced with Wheat and Flax Straw Fibres: Part II Analysis of Composite Microstructure and Mechanical Properties. Journal of Materials Science, 32, 1009-1015. https://doi.org/10.1023/A:1018578322498
|
[79]
|
Oksman, K., Wallstrom, L., Berglund, L.A. and Filho, R.D.T. (2002) Morphology and Mechanical Properties of Unidirectional Sisal-Epoxy Composites. Journal of Applied Polymer Science, 84, 2358-2365. https://doi.org/10.1002/app.10475
|
[80]
|
Saheb, D.N. and Jog, J.P. (1999) Natural Fiber Polymer Composites: A Review. Advances in Polymer Technology, 18, 351-363. https://doi.org/10.1002/(SICI)1098-2329(199924)18:4<351::AID-ADV6>3.0.CO;2-X
|
[81]
|
Georgopoulos, S.T., Tarantili, P.A., Avgerinos, E., Andreopoulos, A.G. and Koukios, E.G. (2005) Thermoplastic Polymers Reinforced with Fibrous Agricultural Residues. Polymer Degradation and Stability, 90, 303-312. https://doi.org/10.1016/j.polymdegradstab.2005.02.020
|
[82]
|
Tanpichai, S. and Oksman, K. (2016) Cross-Linked Nanocomposite Hydrogels Based on Cellulose Nanocrystals and PVA: Mechanical Properties and Creep Recovery. Composites Part A: Applied Science and Manufacturing, 88, 226-233. https://doi.org/10.1016/j.compositesa.2016.06.002
|
[83]
|
Tanpichai, S. and Oksman, K. (2018) Crosslinked Poly(Vinyl Alcohol) Composite Films with Cellulose Nanocrystals: Mechanical and Thermal Properties. Journal of Applied Polymer Science, 135, Article ID: 45710. https://doi.org/10.1002/app.45710
|
[84]
|
Sirviō, J.A., Honkaniemi, S., Visanko, M. and Liimatainen, H. (2015) Composite Films of Poly(Vinyl Alcohol) and Bifunctional Cross-Linking Cellulose Nanocrystals. ACS Applied Materials & Interfaces, 7, 19691-19699. https://doi.org/10.1021/acsami.5b04879
|
[85]
|
Spoljaric, S., Salminen, A., Luong, N.D. and Seppälä, J. (2014) Stable, Self-Healing Hydrogels from Nanofibrillated Cellulose, Poly(Vinyl Alcohol) and Borax via Reversible Crosslinking. European Polymer Journal, 56, 105-117. https://doi.org/10.1016/j.eurpolymj.2014.03.009
|
[86]
|
Pramanik, R., Ganivada, B., Ram, F., Shanmuganathan, K. and Arockiarajan, A. (2019) Influence of Nanocellulose on Mechanics and Morphology of Polyvinyl Alcohol Xerogels. The Journal of the Mechanical Behavior of Biomedical Materials, 90, 275-283. https://doi.org/10.1016/j.jmbbm.2018.10.024
|
[87]
|
Song, T., Tanpichai, S. and Oksman, K. (2016) Cross-Linked Polyvinyl Alcohol (PVA) Foams Reinforced with Cellulose Nanocrystals (CNCs). Cellulose, 23, 1925-1938. https://doi.org/10.1007/s10570-016-0925-y
|
[88]
|
Abdelmouleh, M., Boufi, S., ben Salah, A., Belgacem, M.N. and Gandini, A. (2002) Interaction of Silane Coupling Agents with Cellulose. Langmuir, 18, 3203-3208. https://doi.org/10.1021/la011657g
|
[89]
|
Salas, C., Nypelö, T., Rodriguez-Abreu, C., Carrillo, C. and Rojas, O.J. (2014) Nanocellulose Properties and Applications in Colloids and Interfaces. Current Opinion in Colloid & Interface Science, 19, 383-396. https://doi.org/10.1016/j.cocis.2014.10.003
|
[90]
|
Hajlane, A. (2014) Development of Hierarchical Cellulosic Reinforcement for Polymer Composites. Licentiate Thesis, Luleå Tekniska Universitet, Luleå.
|
[91]
|
Eyley, S. and Thielemans, W. (2014) Surface Modification of Cellulose Nanocrystals. Nanoscale, 6, 7764-7779. https://doi.org/10.1039/C4NR01756K
|
[92]
|
Kalia, S., Boufi, S., Celli, A. and Kango, S. (2014) Nanofibrillated Cellulose: Surface Modification and Potential Applications. Colloid and Polymer Science, 292, 5-31. https://doi.org/10.1007/s00396-013-3112-9
|
[93]
|
Mohd, N.H., Ismail, N.F.H., Zahari, J.I., Wan Fathilah, W.F., Kargarzadeh, H., Ramli, S. and Othaman, R. (2016) Effect of Aminosilane Modification on Nanocrystalline Cellulose Properties. Journal of Nanomaterials, 2016, Article ID: 4804271. https://doi.org/10.1155/2016/4804271
|
[94]
|
Xie, K., Yu, Y. and Shi, Y. (2009) Synthesis and Characterization of Cellulose/Silica Hybrid Materials with Chemical Crosslinking. Carbohydrate Polymers, 78, 799-805. https://doi.org/10.1016/j.carbpol.2009.06.019
|
[95]
|
Mabrouk, A.B., Kaddami, H., Magnin, A., Belgacem, M.N., Dufresne, A. and Boufi, S. (2011) Preparation of Nanocomposite Dispersions Based on Cellulose Whiskers and Acrylic Copolymer by Miniemulsion Polymerization: Effect of the Silane Content. Polymer Engineering & Science, 51, 62-70. https://doi.org/10.1002/pen.21778
|
[96]
|
Xie, Y., Hill, C.A.S., Xiao, Z., Militz, H. and Mai, C. (2010) Silane Coupling Agents Used for Natural Fiber/Polymer Composites: A Review. Composites Part A: Applied Science and Manufacturing, 41, 806-819. https://doi.org/10.1016/j.compositesa.2010.03.005
|
[97]
|
De Oliveira Taipina, M., Ferrarezi, M.M.F., Yoshida, I.V.P. and Gonçalves, M. (2013) Surface Modification of Cotton Nanocrystals with a Silane Agent. Cellulose, 20, 217-226. https://doi.org/10.1007/s10570-012-9820-3
|
[98]
|
Low, I.M., McGrath, M., et al. (2007) Mechanical and Fracture Properties of Cellulose Fibre-Reinforced Epoxy Laminates. Composites Part A: Applied Science and Manufacturing, 38, 963-974. https://doi.org/10.1016/j.compositesa.2006.06.019
|
[99]
|
Hsieh, K.H., Han, J.L., et al. (2001) Graft Interpenetrating Polymer Networks of Urethane Modified Bismaleimide and Epoxy (I): Mechanical Behavior and Morphology. Polymer, 42, 2912-2917. https://doi.org/10.1016/S0032-3861(00)00641-8
|
[100]
|
Alamri, H. and Low, I.M. (2012) Mechanical Properties and Water Absorption Behaviour of Recycled Cellulose Fibre Reinforced Epoxy Composites. Polymer Testing, 31, 620-628. https://doi.org/10.1016/j.polymertesting.2012.04.002
|
[101]
|
Shih, Y.F. (2007) Mechanical and Thermal Properties of Waste Water Bamboo Husk Fiber Reinforced Epoxy Composites. Materials Science and Engineering: A, 445-446, 289-295. https://doi.org/10.1016/j.msea.2006.09.032
|
[102]
|
Mohamed, H.G., Mostafa, A.E., Kazuya, O. and Toru, F. (2010) Effect of Microfibrillated Cellulose on Mechanical Properties of Plain-Woven CFRP Reinforced Epoxy. Composite Structures, 92, 1999-2006. https://doi.org/10.1016/j.compstruct.2009.12.009
|
[103]
|
Reddy, K.O., Maheswari, C.U., et al. (2013) Tensile and Structural Characterization of Alkali Treated Borassus Fruit Fine Fibers. Composites Part B: Engineering, 44, 433-438. https://doi.org/10.1016/j.compositesb.2012.04.075
|
[104]
|
Mishra, S., Misra, M., Tripathy, S.S., et al. (2002) The Influence of Chemical Surface Modification on the Performance of Sisal-Polyester Biocomposites. Polymer Composites, 23, 164-170. https://doi.org/10.1002/pc.10422
|
[105]
|
Jarukumjorn, K. and Suppakarn, N. (2009) Effect of Glass Fiber Hybridization on Properties of Sisal Fiber-Polypropylene Composites. Composites Part B: Engineering, 40, 623-627. https://doi.org/10.1016/j.compositesb.2009.04.007
|
[106]
|
Lu, T., Jiang, M., Jiang, Z., Hui, D., Wang, Z. and Zhou, Z. (2013) Effect of Surface Modification of Bamboo Cellulose Fibers on Mechanical Properties of Cellulose/Epoxy Composites. Composites Part B: Engineering, 51, 28-34. https://doi.org/10.1016/j.compositesb.2013.02.031
|
[107]
|
Abdelmouleh, M., Boufi, S., Belgacem, M.N., Dufresne, A. and Gandini, A. (2005) Modification of Cellulose Fibers with Functionalized Silanes: Effect of the Fiber Treatment on the Mechanical Performances of Cellulose-Thermoset Composites. Journal of Applied Polymer Science, 98, 974-984. https://doi.org/10.1002/app.22133
|
[108]
|
Gao, T.M., Huang, M.F., Li, P.W., Han, Z.P., Xie, R.H. and Chen, H.L. (2012) Preparation and Characterization Nano-Cellulose and its Surface Modification by Silane Coupling Agent. Applied Mechanics and Materials, 217-219, 260-263. https://doi.org/10.4028/www.scientific.net/AMM.217-219.260
|
[109]
|
Thakur, M.K., Gupta, R.K. and Thakur, V.K. (2014) Surface Modification of Cellulose Using Silane Coupling Agent. Carbohydrate Polymers, 111, 849-855. https://doi.org/10.1016/j.carbpol.2014.05.041
|
[110]
|
Sanaeepur, H., Kargari, A. and Nasernejad, B. (2014) Aminosilane Functionalization of a Nanoporous Y-Type Zeolite for Application in a Cellulose Acetate Based Mixed Matrix Membrane for CO2 Separation. RSC Advances, 4, 63966-63976, https://doi.org/10.1039/C4RA08783F
|
[111]
|
Lu, J., Askeland, P. and Drzal, L.T. (2008) Surface Modification of Microfibrillated Cellulose for Epoxy Composite Applications. Polymer, 49, 1285-1296. https://doi.org/10.1016/j.polymer.2008.01.028
|