Apollonov, V.V. (1988) Promising realization of stable heat transfer by means of evaporation condensation of heat carver in high porous cellular metals for high intensity laser optics. Invited Lecture on International Conference “Lasers’88”, Lake Tahoe.

has been cited by the following article:

• TITLE: High power optics and its new manifestations

  AUTHORS: Victor V. Apollonov

  KEYWORDS: Heat Transfer; Surface Deformation; Optical Polishing; Reflectivity; Intermetallic Coatings; Porous Structures; LD Structures; Silicon Carbide; Space-Based Telescopes

  JOURNAL NAME: Natural Science, Vol.5 No.5, May 29, 2013

  ABSTRACT: The advent of the laser has placed stringent requirements on the fabrication, performance and quality of optical elements employed within systems for most practical applications. Their high power performance is generally governed by three distinct steps, firstly the absorption of incident optical radiation (governed primarily by various absorption mechanisms); secondly, followed by a temperature increase and response governed primarily by thermal properties and finally the elements thermo-optical and thermomechanical response, e.g., distortion, stress birefringenous fracture, etc. All of which needs to be understood in the design as efficient, compact, reliable and useful for many applications high power systems, under a variety of operating conditions, pulsed and continuous wave, rep-rated or burst mode of varying duty cycles.