
1. Introduction
The direct computation of surface integrals of vector fields [1] is quite difficult, but we can simplify the derivation of the result using the Gauss theorem [2] [3] . However, the Gauss theorem can be used to calculate a flux through a closed surface that fully encloses a volume, but it can not directly be used to calculate the flux through surfaces with boundaries. See examples below:
Example 1: Evaluate
, where
is the lateral surface of
.
Example 2: Evaluate
, where
is the lateral surface of
.
The above example doesn’t satisfy the condition that the integrand has a first-order continuous partial derivative in the closed space, and Gauss theorem cannot be used directly. In order to use the Gauss theorem in the flux through surfaces with boundaries, we often construct a closed surface that fully encloses a volume through a complemented surface in the boundaries.
In this paper, we first discuss a classical surface integral of vector fields, then introduce an approach for the computation of integral surfaces in vector fields and obtain a generalized mathematical expression based on Gauss theorem. It turns out that with these conclusions the computation of common complex integral, such as Example 1 and Example 2, within minimum time is realized. The integral given by theorem 1 is more general. The research on surface integral of vector field in this paper will enrich and develop the integral theory to a certain extent, and provide reference for other application fields.
2. Main Results
Lemma 1: 1) Suppose
is a subset of
which is compact and has a piecewise smooth boundary
;
;
,
,
are continuously differentiable vector field defined on a neighborhood of
; 2) Let:
, for any
and
. Then we have:
(1)
Remark 1 (1) Take:
. It is intuitively clear from the construction of the integral that the example 1 and example 2 belong to the Equation (1). A general application of the Equation (1) is in natural science and physical science.
Theorem 1: Suppose
is a subset of
which is compact and has a piecewise smooth boundary
;
;
,
,
are continuously differentiable vector field defined on a neighborhood of
;
. Then:
1) Let:
Denote by
, a small surface taken within the integral surfaces. The space bounded by
is denoted by
. The space bounded by
and
is denoted by
, satisfying
,
.
2) It is easy to know that the partial derivatives of functions P, Q, R are continuous on the place
and
3) Using Gauss theorem, we have:
(2)
where
is the outer edge of the surface,
is the inner side of the surface.
4) The speed of solving surface integrals of vector fields depends on the surface shape that we take. By introducing a surface
, solutions to the Equation (2) are given by the solutions to the other integral equations. Two kinds of methods has be shown in the following:
a) Take
as a small oval surface
, see Figure 1.
so the Equation (2) can be written in the form:
(3)
Calculation of Equation (3) is often done by using the following methods:
i) Using Gauss theorem [2] ,
Indeed:
then we obtain:
ii) Using the connection of two kinds of surface integral.
Project the surface on the xoy plane, see Figure 2.
Let:
Then:
(4)
Using polar coordinate transformation. If x, y are transformed into r,
by a transformation
,
then we have Equation (4) as follows:
Then we obtain:
iii) Using the relationship between the two kinds of surface integrals.
where on surface
, we have:
Let:
then we have:
That is:
Similarly on surface
, we have:
since the surface of
is symmetric about the xoy plane, we have:
(5)
Similar with Equation (4), we have Equation (5) is
Then we obtain:
b) Take
as a small cube surface
, see Figure 3.
Let:
Then:
where:
However, we can compute
as follows:
(6)
Using a simple equation:
We have the follows:
(7)
The key idea in solving Equation (7) is using proper variable transform, make sure the computation of Equation (7) is easier to come out.
Suppose:
Then:
(8)
Meanwhile, the integration interval is known to be:
This implies:
(9)
From Equation (8) and Equation (9), we have Equation (7) as:
(10)
Suppose:
(11)
Then we show that:
(12)
From Equation (11) Equation (12), we have Equation (10) as:
(13)
Apply
to Equation (13) to obtain:
Similarly:
Then:
(14)
Let
Next we show that the sum of
is
.
With:
(15)
Therefore, the denominator of Equation (15) is:
(16)
the numerator of Equation (15) is:
(17)
Equations (15)-(17) imply the value of
is
, in other words:
(18)
From Equation (18) we have Equation (15) as follows:
Then we obtain:
Remark 2: 1) The result of Equation (18) is proved by computer simulation, the process is given in the appendix.
2) Lemma 1 is a generalization of the Gauss theorem. Theorem 1 is a general expression for the lemma 1.
3) From theorem 1, it is sufficient to compute the surface integrals in vector fields, such as Example 1 and Example 2.
Example 1:
Example 2:
Lots of surface integrals are integrals of the form
.
Funding
Natural Science Foundation of Chongqing (Grant No. cstc2020jcyj-msxmX0232); Higher Education Research Project of Chongqing Municipal (Grant No. 203332).
Appendix
Suppose
as follows:
1).
2).
3).
4).
5).
6).
According to Equation (18), using R we can obtain:
> 3.1415926 = 2
[1] 1.570796
> atan((1/3)^(1/2))+atan((1/3)^(1/2))+atan((1/3)^(1/2))
[1] 1.570796
> atan((1/1)^(1/2))+atan((1/4)^(1/2))+atan((1/9)^(1/2))
[1] 1.570796
> atan((8/7)^(1/2))+atan((8/(4*7))^(1/2))+atan((8/(16*7))^(1/2))
[1] 1.570796
> atan((24/(4*9))^(1/2))+atan((24/(9*9))^(1/2))+atan((24/(16*9))^(1/2))
[1] 1.570796
> atan((30/(4*10))^(1/2))+atan((30/(9*10))^(1/2))+atan((30/(25*10))^(1/2))
[1] 1.570796
> atan((5/9)^(1/2))+atan((5/16)^(1/2))+atan((5/25)^(1/2))
[1] 1.570796