Load-Measuring Pot Bearing with Built-In Load Cell

Journals Menu

Follow SCIRP

ISSN Print: 1947-3931
ISSN Online: 1947-394X
www.scirp.org/journal/eng
E-mail: eng@scirp.org

"Load-Measuring Pot Bearing with Built-In Load Cell —Part I: Design and Performance"
written by Jeong-Rae Cho, Young Jin Kim, Jong-Won Kwark, Sung Yong Park, Won Jong Chin, Byung-Suk Kim,
published by Engineering, Vol.5 No.11, 2013

has been cited by the following article(s):

[1]	Strategies for mitigation of the failure of concrete pedestals supporting bridge girder bearings
	2017

[2]	로드셀 삽입형 하중계측용 포트받침의 온도 특성 개선
	2015

[3]	Load-Measuring Pot Bearing with Built-In Load Cell—Part II: Fatigue Performance and Experimental Temperature Correction
	Engineering, 2013

Follow SCIRP

Free SCIRP Newsletters

Add your e-mail address to receive free newsletters from SCIRP.

Top

[1]	Evaluation of a Load Cell-Based Bridge Weigh-in-Motion System Transportation Research Record: Journal of the Transportation Research Board, 2024 DOI:10.1177/03611981241263336

[2]	Load-Measuring Pot Bearing with Built-In Load Cell —Part II: Fatigue Performance and Experimental Temperature Correction Engineering, 2013 DOI:10.4236/eng.2013.511108