T. Ohno, M. Akiyoshi, T. Umebayashi, K. Asai, T. Mitsui and M. Matsumura, “Preparation of S-doped TiO2 Photocatalysis and their Photocatalytic Activities under Visible Light,” Applied Catalysis A: General, Vol. 265, No. 1, 2004, pp. 115-121. doi:10.1016/j.apcata.2004.01.007

has been cited by the following article:

• TITLE: Synthesis of Solid Acid Catalysts Based on TiO2- SO42-and Pt/TiO2- SO42- Applied in n-Hexane Isomerization

  AUTHORS: Juan Manuel Hernández Enríquez, Luz Aracely Cortez Lajas, Ricardo García Alamilla, Estefanía Ángeles San Martín, Pedro García Alamilla, Edward Brent Handy, Guadalupe Cárdenas Galindo, Luz Arcelia García Serrano

  KEYWORDS: Acid Catalysts; Sulfated Titanium Oxide; Physico-Chemical Properties; n-Hexane Isomerization

  JOURNAL NAME: Open Journal of Metal, Vol.3 No.3, September 18, 2013

  ABSTRACT: The physicochemical properties and catalytic activity of pure and sulfated titanium oxide (TiO2 and ) is described in this work. Titanium hydroxide synthesized by the sol-gel method was impregnated with a 1 N H2SO4 solution, varying amount of sulfate ions () in the range from 10 to 20 wt%. Pure and modified hydroxides were calcined at 500°C for 3 h and then characterized by TGA-DTG, XRD, BET, FT-IR, potentiometric titration with n-butylamine and 2-propanol dehydration. Catalytic activity of materials was tested in the n-hexane isomerization at 350°C. The results showed that TiO2 and mainly developed anatase phase. All have acceptable specific surface area (95-105 m2/g). Potentiometric titration with n-butylamine revealed that showed higher acidity (430-530 mV) than compared to pure TiO2 (﹣15 mV), indicating that this oxide only has weak acidity. The results showed good relationship between acidity determined by potentiometric titration with n-butylamine and the catalytic activity evaluated by 2-propanol dehydration and n-hexane isomerization. Titanium oxide with 20 wt% ofions was the material that demonstrated the highest catalytic activity for both reactions.