Cuce, E., Cuce, P.M. and Bali, T. (2013) An Experimental Analysis of Illumination Intensity and Temperature Dependency of Photovoltaic Cell Parameters. Applied Energy, 111, 374-382.
https://doi.org/10.1016/j.apenergy.2013.05.025

has been cited by the following article:

• TITLE: A Study of the Temperature Influence on Different Parameters of Mono-Crystalline Silicon Photovoltaic Module

  AUTHORS: Said Amar, Mustapha Bahich, Youness Bentahar, Mohamed Afifi, Elmostapha Barj

  KEYWORDS: Module Temperature, Photovoltaic Parameters, Solar Irradiation, Solar Panel

  JOURNAL NAME: Journal of Power and Energy Engineering, Vol.9 No.6, June 17, 2021

  ABSTRACT: In this article, the effect of temperature on the photovoltaic parameters of mono-crystalline silicon Photovoltaic Panel is undertaken, using the Matlab environment with varying module temperature in the range 25°C - 60°C at constant solar irradiations 200 - 500 W/m2. The results show that the temperature has a significant impact on the various parameters of the photovoltaic panel and it controls the quality and performance of the solar panel. The photovoltaic parameters are the current of short circuit Isc, the open circuit voltage Vco, the form factor FF, the maximum power Pmax as well as efficiency. The relative change of these photovoltaic parameters with temperature is also evaluated in this article. A DS-100M solar panel has been used as reference model. The results show also that the open circuit voltage, maximum power, fill factor and efficiency decrease with temperature, but the short circuit current increases with temperature. The results are in good agreement with the available literature.