J. T. Kuo, T. H. Yeh and C. Yeh, “Design of Microstrip Bandpass Filters with a Dual Pass Band Response,” IEEE Microwave Theory and Techniques Transactions, Vol. 53, No. 4, April 2005, pp. 1331-1337. doi:10.1109/TMTT.2005.845765

has been cited by the following article:

• TITLE: Study and Enhanced Design of RF Dual Band Bandpass Filter Validation and Confirmation of Experimental Measurements

  AUTHORS: Mohamed Mabrouk, Leila Bousbia

  KEYWORDS: RF Filters, Dual Bandpass, Effective Permittivity, Physical And Geometrical Parameters

  JOURNAL NAME: Circuits and Systems, Vol.2 No.4, October 24, 2011

  ABSTRACT: Dual band bandpass filter is designed and optimized for RF wireless applications. The performances of that RF dual band filter are improved especially parameters describing the insertion loss, return losses and rejection. Dual-band bandpass filter using stub loaded resonators is designed and characterized. Theoretical results are compared with experimental data. This comparison shows that the magnitude of reflection coefficient S11 from ADSTM simulation is better than 28.0 dB, and the insertion loss S21 is less than 0.5 dB. The two rejections are also better than 32.0 dB. The simulated results also show that two central frequencies are located at desired 1.82 and 2.95 GHz. Comparison of measured and simulated results shows frequency drift. The main reason for this frequency shifting is due to some uncertainties. These are obviously due to geometrical and physical parameters H and εr respectively of Duroid substrate used during design and measurements.