1. Introduction
Dental materials have special requirements. For health reasons, dental materials should be suitable for use in the oral environment. In certain applications, strength and durability of a dental material is important to ensure satisfactory performance. In some other situations, the esthetic component would be more important.
Esthetic dental appearance of teeth is one of the patients’ demands. This helped in the evolution of esthetic restorations, including the use of resin-based composite materials [1] -[7] . Restorative dentistry is a major specialty in practical clinical dentistry. In order to treat dental caries, we need to excavate the pathology and restore the cavity with a proper dental filling material. One of the options is the use of light polymerized direct-toothcolored restorative materials.
Resin-based composite restorative material is one of the light polymerized restorative materials, an accepted dental filling, and more clinically accepted from 1970s [8] [9] . Since then, evolution has made it one of the most commonly used types of filling; the light cured composite resin [2] [3] [9] . With its success rate is in an increasing scale [6] [9] , composite restoration is being more and more used in restorative dentistry field.
Many countries have recognized the importance of technology assessment in dental care. Dental technology review is needed because of the rapid increase of published research and rising dental-care expenditures due to new dental treatment options. The pace of change with which dentists must cope daily in their practices has also accelerated. Evaluating, adopting, implementing new technologies, has taken an important role in a dental practice. Some of the areas which have emerged recently are Dental Composites, Aesthetic Posts, Ceramics, Veneers, Computer-aided design/Computer aided manufacturing (CAD/CAM). This paper looks at the advantages and disadvantages of each of these materials (Table 1).
Table 1. Advantages and disadvantages of the aesthetic materials.
2. Dental Composites (Figure 1)
“Composite” refers to a mixture of different materials. Dental composites are tooth-colored filling materials composed of synthetic polymers, particulate ceramic reinforcing fillers, molecules which promote or modify the polymerization reaction that produces the cross-linked polymer matrix from the dimethacrylate resin monomers, and silane coupling agents which bond the reinforcing fillers to the polymer matrix [10] . Every component of the composite has a different function and contributes towards the success of the final dental restoration. However, the most significant developments in the evolution of commercial composites to date have been direct results of modifications to the filler component. Fillers are used in dental composites to provide strengthening [11] , increased stiffness [12] , reduced dimensional change when heated and cooled [13] , reduced setting contraction [14] , enhanced esthetics, and improved handling.
Ferracane [10] classified dental conposites based on the filler size as:
1) Microfills: Amorphous silica filler particles (0.04 µm), pre-polymerized resin fillers (5 - 50 µm), inorganic filler volume 25% - 50%;
2) Minifills: Barium, strontium or zirconia silicate fillers (0.6 - 1.0 µm), amorphous silica (0.04 µm), typical inorganic filler volume 50% - 70%;
3) Midfills: Barium, strontium or zirconia silicate fillers (1 - 1.5 µm), amorphous silica (0.04 µm), typical inorganic filler volume 55% - 70% and also contains quartz fillers.
2.1. Advantages
Dental composites are esthetic and relatively less expensive. The restoration can be completed in one day and it has also the property of “self-sealing”. Another advantage is that these restorations can be easily repaired though the frequency of repair is relatively low.
2.2. Disadvantages
Sometimes after the placement of dental composites, the patient may complain of moderate tooth sensitivity. Another disadvantage is that the method of application is technique sensitive. It also costs more than dental amalgam. Dental composites tend to shrink when hardened and also may wear faster than dental enamel.
3. Aesthetic Posts
The introduction of aesthetic posts has made a great impact on the restoration of endodontically treated teeth. Since their introduction [15] [16] , technology had modified and further improved post shape and materials; in
Figure 1. Dental composites. Courtesy: Durham dental fillings, Dr. Christopher Bouldin.
addition, the use of innovative adhesive systems and cementation techniques has offered the possibility to achieve high level of adhesion within the root canal [17] -[19] , producing new posts which ensure dental tissue conservation [19] . The restoration of endodontically treated teeth is a critical step in the success of root canal treatment [20] . Factors such as trauma and caries can lead to the creation of a large flared root canal. Traumatic impact on the anterior teeth in young patients often interrupts apical closure and full root development, leading to the formation of an enlarged root canal that remains flared. Flared canals are more susceptible to fracture because the remaining walls are thin, and the restoration of these teeth requires techniques that will not compromise the integrity of the remaining radicular tooth structure [21] [22] . Until 15 years ago, the restoration of these teeth involved a combination of prefabricated or custom made metallic posts and cores [22] . However, the introduction of materials that can bond to dentine has created an alternative option for the reconstruction and rehabilitation of root canals that have been severely damaged by caries, trauma, congenital disorders, or internal resorption [23] . Polyethylene fibers are used to improve the impact strength of composite materials, and they are nearly invisible in resinous matrices. For these reasons, polyethylene fibres seem to be the most appropriate and aesthetic strengtheners of composite materials [24] [25] .
3.1. Advantages
The advantages of aesthetic posts are: It offers retention without the need for extensive preparation of tooth structure, it may increase resistance form of the tooth preparation to some extent, and it is less time consuming and less expensive than cast restorations which require multiple appointments [24] .
3.2. Disadvantages
It does not increase the strength of the overlying restorative material. It induces stresses in dentin in the form of cracks or craze lines, which may increase the potential for the fracture of tooth and micro leakage. It could increase the chances of perforation into root canal or on the external tooth surface. The long term results are also not available [23] .
4. Ceramic Crowns (Figure 2)
Ceramics are replacing metals as materials of choice in dental crowns [26] , as well as in other biomechanical prostheses. Although alumina-based crowns continue to replace metal-based crowns, failure rates remain an issue [27] . Clinically, bulk fractures are the reported cause of all ceramic crown failure whether the crown is a monolith or a layered structure [28] . Failure generally does not result from damage at the occlusal surface, but rather from subsurface radial cracks at the cementation interface. The radial cracks are initially contained within the inner core layer, but subsequently propagate to the core boundaries, ultimately causing irretrievable failure.
4.1. Advantages
The major advantage of ceramic crowns is the esthetic result. The thermal conductivity is low for ceramics and Before Ceramic Crowns After Ceramic Crowns
Figure 2. Ceramic crowns. Courtesy: Smile by design dental group, Dr. Choi.
also it is resistant to corrosion. Also, there are no galvanic reactions for ceramics. Dental ceramics are claimed to be the most biocompatible materials used to date for dental restorations [29] [30] .
4.2. Disadvantages
Ceramic crowns are expensive and require a high level of clinical skill. The process of preparation is technique sensitive and it requires the removal of considerable amount of sound tooth structure [31] . Occasional postoperative pain from cementation and bonding techniques has been reported. Excessive wear of opposing tooth may occur if ceramic surface is not properly glazed or polished [32] .
5. CAD/CAM for Ceramic Crowns (Figure 3)
All-ceramic posterior crowns can be fabricated either as core crowns using CAD/CAM-generated copings, which are manually veneered by the laboratory technician or are CAD/CAM-generated as full monolithic crowns [33] . CAD/CAM (computer-aided design/computer aided manufacturing) systems have evolved over the last two decades and have been used by dental health professionals for over twenty years [34] . One of the main lines of implementation was the intraoperative use for dental restoration using prefabricated ceramic monoblocks [35] . The CAD/CAM systems have been used mostly for the manufacturing of prosthetic fixed restorations, such as inlays, onlays, veneers and crowns. Custom abutments created with CAD/CAM technology have the potential to provide the advantages of both stock and laboratory processed custom abutments without the disadvantages. First, like laboratory-made abutments, CAD/CAM abutments are specific for each patient [36] , however the results are much more consistent. The virtually designed abutment is electronically transferred to a CAM milling apparatus that creates the abutment from a block of the selected abutment material. Most of the inherent dimensional inaccuracies of waxing, investing and casting are eliminated. Unlike stock or cast custom abutments, the abutment surfaces of CAD/CAM abutments are not subjected to the above-mentioned manipulation processes after machining, so CAD/CAM abutments have the potential to provide the most accurate fit of any abutment type. When compared with a stock and cast abutment, the cost of a CAD/CAM implant abutment presently lies somewhere between the two. This expense is likely to decrease over time as CAD/CAM systems for abutment fabrication become commonplace. Conversely, costs of manpower and labor-intensive laboratory processes are likely to escalate, thereby increasing the cost of prepared stock abutments or handmade cast custom abutments. Materials used CAD/CAM technology has used metals such as titanium and titanium alloys, and ceramics such as aluminum oxide or zirconium oxide for the fabrication of implant abutments [37] .
Figure 3. Dental CAD/CAM milling machine. Courtesy: Robots and design, Seongnam city, Gyunggi-do, Korea.
5.1. Advantages
Many dentists enjoy and prefer having total control of their restorative services without involvement with a laboratory. In-office CAD/CAM restoration fabrication allows that independence. The computer and milling processes diminish potential inaccuracies resulting from the hand/laboratory fabrication process [38] .
Dentists are able to delegate much of the CAD/CAM restoration fabrication procedure to competent, intelligent and motivated staff members, thereby freeing themselves to accomplish tasks that only they can legally perform. Patients appreciate the convenience of having restorations placed in one appointment, instead of having to come back for a second seating appointment. The in-office procedure is relatively fast, and because it enables the dentist to delegate much of the clinical procedure to staff members, the efficiency and productivity of the dental office can be improved. In-office CAD/CAM users report that they can perform more dental procedures, at a faster rate, with outcomes at least as predictable as and sometimes more predictable than those that resulted when they used conventional procedures.
5.2. Disadvantages
The cost of in-office CAD/CAM is a significant deterrent. Practitioners need to be convinced of its acceptability and practicability in their practices [39] . Becoming familiar with the CAD/CAM concept requires time and concentration, but after repeated use, the operation of the device becomes nearly automatic. As with any new technology, its cost is high, but using it can be financially feasible. Clinical and basic science investigations have resulted in positive findings on the concept.
6. Ceramic Veneers (Figure 4)
Since their introduction in the early 1980’s ceramic veneers have gained wide acceptance as a primary mode of restoration in esthetic dentistry [40] . As patients’ aesthetic expectations continue to increase, dental teams are challenged to identify a systematic approach for achieving natural oral and facial aesthetics with ceramic veneers. Advances in ceramic materials and veneering techniques allow practitioners to restore function and aesthetics using conservative and biologically sound methods as well as promoting long term oral health [41] . Aesthetics, treatment planning and clinical care should be considered in accordance with the interrelationship between the teeth, gingival tissues, lips and face. Consideration as to how the facial and psychological parameters can influence a natural smile design must also be taken into account. Because ceramic veneers are primarily indicated for the improvement of aesthetics, the design of the smile should respect the symmetry and the harmonious arrangement of dento-facial elements [42] . The patient is often the final judge of restorations in aesthetically driven treatment. If the clinician and patient do not have the same results in mind, there is the possibility that the patient will not approve the definitive restorations. For these reasons it is important to accurately visualize the restorations before finalization [43] [44] .
6.1. Advantages
Some of the advantages of Porcelain veneers are: They are extremely natural looking. Porcelain and tooth enamel are both white and translucent. So they react to light in similar ways. Light enters them both and is reflected back off the layer beneath them. They are stain resistant and very durable [41] .
Figure 4. Ceramic veneers. Courtesy: Seasons of smiles dental, Dr. Norman Medina.
6.2. Disadvantages
While porcelain veneers are an excellent choice for most people, there are some disadvantages that should be considered:
1) Porcelain veneers have a potential to break;
2) Porcelain veneer application is not a reversible process;
3) The porcelain veneer procedure is more expensive than composite dental veneers;
4) Increased tooth-sensitivity.
For most people, the benefits of porcelain veneer dental bonding far outweigh any negative aspects of the procedure.
7. Conclusion
Dentist and dental technician alike must be aware of the current technologies in their fields and be able to use it to their and their patient’s advantage. The learning objective of this article is to review the advantages and disadvantages of recent esthetic materials and technology to aid in the proper utilization of the available treatment options with discretion.