[1]
|
G. Hanrahan and K. Lu, “Application of Factorial and Response Surface Methodology in Modern Experimental Design and Optimization,” Critical Reviews in Analytical Chemistry, Vol. 36, 2006, pp. 141-151.
doi:10.1080/10408340600969478
|
[2]
|
P. E. Smith and E. A. Arsenault, “Application of Factorial and Response Surface Methodology in Modern Experimental Design and Optimization,” Talanta, Vol. 48, 1996, pp. 1207-1268. doi:10.1016/0039-9140(96)01882-6
|
[3]
|
K. J. Lamble and S. J. Hill, “Microwave Digestion Procedures for Environmental Matrices, Critical Review,” Analyst, Vol. 123, 1998, pp. 103-133. doi:10.1039/a800776d
|
[4]
|
I. V. Kubrakova and E. S. Toropchenova, “Microwave Heating for Enhancing Efficiency of Analytical Operations (Review),” Inorganic Materials, Vol. 44, 2008, pp. 1509-1519. doi:10.1134/S0020168508140069
|
[5]
|
H. M. Kinston and S. J. Haswell, “Microwave-Enhanced Chemistry, Fundamental, Sample Preparation and Applications,” American Chemical Society, Washington DC, 1997.
|
[6]
|
C. Bosch Ojeda and F. Sánchez Rojas, “Sample Dissolution for Elemental Analysis/Microwave Digestion,” Encyclopedia of Analytical Chemistry, 2nd Edition, Elsevier, 2005, pp. 153-163.
doi:10.1016/B0-12-369397-7/00540-9
|
[7]
|
M. Luo, J. Gao, G. Qiao and Z. Jin, “Synthesis of Wood-Derived Ceramics from Biological Templates,” Progress in Chemistry, Vol. 20, 2008, pp. 989-1000.
|
[8]
|
H. Sieber, J. Cao, C. R. Rambo and P. Greil, “Manufacturing of Porous Oxide Ceramics from Bioorganic Preforms,” Ceramic Engineering and Science Proceedings, Vol. 23, 2002, pp. 175-181.
doi:10.1002/9780470294758.ch20
|
[9]
|
M. Singh and B. M. Yee, “Reactive Processing of Environmentally Conscious, Biomorphic Ceramics from Natural Wood Precursors,” Journal of the European Ceramic Society, Vol. 24, 2004, pp. 209-217.
doi:10.1016/S0955-2219(03)00244-9
|
[10]
|
J. Cao, C. R. Rambo and H. Sieber, “Preparation of Porous Al2O3-Ceramics by Biotemplating of Wood,” Journal of Porous Materials, Vol. 11, 2004, pp. 163-172.
doi:10.1023/B:JOPO.0000038012.58705.c9
|
[11]
|
J. Cao, O. Rusina and H. Sieber, “Processing of Porous TiO2-Ceramics from Biological Preforms,” Ceramics International, Vol. 30, 2004, pp. 1971-1974.
doi:10.1016/j.ceramint.2003.12.180
|
[12]
|
J. Cao, C. R. Rambo and H. Sieber, “Manufacturing of Microcellular, Biomorphous Oxide Ceramics from Native Pine Wood,” Ceramics International, Vol. 30, 2004, pp. 1967-1970. doi:10.1016/j.ceramint.2003.12.181
|
[13]
|
C. R. Rambo, J. Cao and H. Sieber, “Preparation and Properties of Highly Porous, Biomorphic YSZ Ceramics,” Materials Chemistry and Physics, Vol. 87, 2004, pp. 345-352. doi:10.1016/j.matchemphys.2004.05.031
|
[14]
|
C. R. Rambo, J. Cao, O. Rusina and H. Sieber, “Manufacturing of Biomorphic (Si,Ti,Zr)-Carbide Ceramics by Sol-Gel Processing,” Carbon, Vol. 43, 2005, pp. 1174-1183. doi:10.1016/j.carbon.2004.12.009
|
[15]
|
Statgraphics Plus (version 5.1), Reference Manual; Manugistics: Rockville, MD, 1992.
|
[16]
|
Physical Electronics, Multitechnique ESCA Reference Manual for the PCACCES Software Version 6.0; Physical Electronics: Minneapolis, USA, 1995.
|
[17]
|
M. Nechar, M. F. Molina and J. M. Bosque-Sendra, “Application of Doehlert Optimization and Factorial Designs in Developing and Validating a Solid-Phase Spectrophotometric Determination of Trace Levels of Cadmium,” Analytica Chimica Acta, Vol. 382, 1999, pp. 117-130. doi:10.1016/S0003-2670(98)00768-5
|
[18]
|
L. M. Costa, S. L. C. Ferreira, A. R. A. Nogueira and J. A. Nóbrega, “Use of Factorial Design for Optimization of Microwave-Assisted Digestion of Lubricating Oil,” Journal of the Brazilian Chemical Society, Vol. 16, 2005, pp. 1269-1274.
|