[1]
|
WCED (World Commission on Environment Development) (1987) Our Common Future, World Commission on Environment and Development. Oxford University Press, Oxford.
|
[2]
|
Anastas, P. and Zimmerman, J. (2003) Design through the Twelve Principles of Green Engineering. Environmental Science & Technology, 37, 94A-101A. https://doi.org/10.1021/es032373g
|
[3]
|
McDonough, W., Braungart, M., Anastas, P.T. and Zimmerman, J.B. (2003) Applying the Principles of Green Engineering to Cradle-to-Cradle Design. Environmental Science and Technology, 37, 434A-441A. https://doi.org/10.1021/es0326322
|
[4]
|
White, L. and Noble, B. (2013) Strategic Environmental Assessment for Sustainability: A Review of a Decade of Academic Research. Environmental Impact Assessment Review, 42, 60-66. https://doi.org/10.1016/j.eiar.2012.10.003
|
[5]
|
Gerngross, T. and Slater, S. (2000) How Green Are Green Plastics? Scientific American. https://doi.org/10.1038/scientificamerican0800-36
|
[6]
|
Chandra, R. and Rustgi, R. (2011) Biodegradation of Maleated Linear Low-Density Polyethylene and Starch Blends. Polymer Degradation and Stability, 56, 185-202. https://doi.org/10.1016/S0141-3910(96)00212-1
|
[7]
|
European Commission, DG Environment (2011) BIO Intelligence Service, Plastic Waste in the Environment—Final Report.
|
[8]
|
Halley, P.J., Truss, R.W., Markotsis, M.G., Chaleat, C., Russo, M., Sargent, A.L., et al. (2007) A Review of Biodegradable Thermoplastic Starch Polymers. In: Polymer Durability and Radiation Effects, American Chemical Society, Washington DC, Chapter 24, 287-300. https://doi.org/10.1021/bk-2007-0978.ch024
|
[9]
|
Tom, L., Mark, R., Brenda, P., et al. (2009) Sustainable Biomaterials Collaborative, Guidelines for Sustainable Bioplastics, Volume 1.
|
[10]
|
Bastioli, C. (2005) Starch-Based Technology. In: Bastioli, C., Ed., Handbook of Biodegradable Polymers, Rapra Technology Limited, Shawbury, 257-286.
|
[11]
|
Patel, M., Bastioli, C., Marini, L. and Wurdinger, E. (2005) Life-Cycle Assessment of Bio-Based Polymers and Natural Fiber Composites. In: Biopolymers Online, Wiley, Hoboken, 272-291.
|
[12]
|
BPI World (2013) BPI Certified Compostable Plastic Resins, Cutlery, Bags, and Packaging.
|
[13]
|
Hunter, S., Pereira, B. and Helling, R. (2008) Life Cycle Assessment of Sugarcane Polyethylene. The DOW Chemical Company. https://www.dow.com/-/media/dow/business-units/dow-us/energ-ice/109-52241
|
[14]
|
Liu, Z. and Liang, J. (1999) Methanol to Olefin Conversion Catalyst. Current Opinion in Solid State & Material Science, 4, 80-84. https://doi.org/10.1016/S1359-0286(99)80015-1
|
[15]
|
Chavan, S., Srinivas, D. and Ratnasamy, P. (2001) Selective Oxidation of Para-Xylene to Terephthalic Acid by µ3-Oxo-Bridged Co/Mn Cluster Complexes Encapsulated in Zeolite-Y. Journal of Catalysis, 204, 409-419. https://doi.org/10.1006/jcat.2001.3385
|
[16]
|
Penga, F., Rena, J., Xub, F., Bianb, J., Pengc, P. and Sun, R. (2010) Comparative Studies on the Physico-Chemical Properties of Hemicelluloses Obtained by DEAE-Cellulose-52 Chromatography from Sugarcane Bagasse. Food Research International, 43, 683-693. https://doi.org/10.1016/j.foodres.2009.10.020
|
[17]
|
Zhao, X., Wu, R. and Liu, D. (2011) Production of Pulp, Ethanol and Lignin from Sugarcane Bagasse by Alkali-Peracetic Acid Delignification. Biomass and Bioenergy, 35, 2874-2882. https://doi.org/10.1016/j.biombioe.2011.03.033
|
[18]
|
Park, S. and Lee, S. (2005) Systems Biological Approach for the Production of Various Polyhydroxyalkanoates by Metabolically Engineered Escherichia coli. Macromolecular Symposia, 224, 1-9. https://doi.org/10.1002/masy.200550601
|
[19]
|
Qi, Z., Ye, H., Xu, J., Chen, J. and Guo, B. (2013) Improved the Thermal and Mechanical Properties of Poly(butylene succinate-co-butylene adipate) by Forming Nanocomposites with Attapulgite. Colloids and Surfaces A: Physicochemical and Engineering Aspects, 421, 109-117. https://doi.org/10.1016/j.colsurfa.2012.12.051
|
[20]
|
Tan, L., Chen, Y., Ahou, W., Nie, H., Li, F. and He, X. (2010) Novel Poly(butylene succinate-co-lactic acid) Copolyesters: Synthesis, Crystallization, and Enzymatic Degradation. Polymer Degradation and Stability, 95, 1920-1927. https://doi.org/10.1016/j.polymdegradstab.2010.04.010
|
[21]
|
Urakami, T., et al. (2000) Development of Biodegradable Plastic Poly-Beta Hydroxybutyrate/Polycaprolactone Blend Polymer. Kobunshi Ronbunshu, 57, 263. https://doi.org/10.1295/koron.57.263
|
[22]
|
Greene, J. (2009) Biodegradable and Oxodegradable Plastics Degradation in Compost and Marine Environments. Proceedings of the 8th World Congress of Chemical Engineering, Montreal, August 2009.
|
[23]
|
Greene, J. (2013) PHA Biodegradable Blow-Molded Bottles: Compounding and Performance. Plastics Engineering, 69, 16-21. https://doi.org/10.1002/j.1941-9635.2013.tb00940.x
|
[24]
|
Tianjin Biodegradable Plastics (2011) Green Bio from Tianjin.
|
[25]
|
Wang, W.T., Zhang, H., Jia, R., Dai, Y.Y., Dong, H.Z., Hou, H.X. and Guo, Q.B. (2018) High Performance Extrusion Blown Starch/Polyvinyl Alcohol/Clay Nanocomposite Films. Food Hydrocolloids, 79, 534-543. https://doi.org/10.1016/j.foodhyd.2017.12.013
|
[26]
|
Natureworks (2013) How Ingeo Is Made. https://www.natureworksllc.com/What-is-Ingeo/How-Ingeo-is-Made
|
[27]
|
Shindo, S. and Tachibana, T. (2004) Production of L-Lactic Acid from Spent Grain, a By-Product of Beer Production. Journal of the Institute of Brewing, 110, 347-351. https://doi.org/10.1002/j.2050-0416.2004.tb00631.x
|
[28]
|
Mussatto, S., Fernandes, M., Manciha, I. and Roberto, I. (2008) Effects of Medium Supplementation and pH Control on Lactic Acid Production from Brewer’s Spent Grain. Biochemical Engineering Journal, 40, 437-444. https://doi.org/10.1016/j.bej.2008.01.013
|
[29]
|
Auras, R., Harte, B. and Selke, S. (2004) An Overview of Polylactides as Packaging Materials. Macromolecular Bioscience, 4, 835-864. https://doi.org/10.1002/mabi.200400043
|
[30]
|
Garlotta, D. (2001) A Literature Review of Poly(lactic acid). Journal of Polymers and the Environment, 9, 63-84. https://doi.org/10.1023/A:1020200822435
|
[31]
|
Cooper-White, J.J. and Mackay, M.E. (1999) Rheological Properties of Poly(lactides). Effect of Molecular Weight and Temperature on the Viscoelasticity of Poly(l-lactic acid). Journal of Polymer Science Part B: Polymer Physics, 37, 1803-1814. https://doi.org/10.1002/(SICI)1099-0488(19990801)37:15<1803::AID-POLB5>3.0.CO;2-M
|
[32]
|
Datta, R. and Henry, M. (2006) Lactic Acid: Recent Advances in Products, Processes, and Technologies—A Review. Journal of Chemical Technology & Biotechnology, 81, 1119-1129. https://doi.org/10.1002/jctb.1486
|
[33]
|
Taubner, V. and Shishoo, R. (2001) Influence of Processing Parameters on the Degradation of Poly(l-lactide) during Extrusion. Journal of Applied Polymer Science, 79, 2128-2135. https://doi.org/10.1002/1097-4628(20010321)79:12<2128::AID-APP1020>3.0.CO;2-#
|
[34]
|
Song, J.H., Murphy, R.J., Narayan, R. and Davies, G.B.H. (2009) Biodegradable and Compostable Alternatives to Conventional Plastics. Philosophical Transactions of the Royal Society B, Biological Sciences, 364, 2127-2139. https://doi.org/10.1098/rstb.2008.0289
|
[35]
|
Westhoff, R.P., Otey, F.H., Mehltretter, C.L. and Russell, C.R. (1974) Starch-Filled Polyvinyl Chloride Plastics—Preparation and Evaluation. Industrial and Engineering Chemistry Product Research and Development, 13, 123-125. https://doi.org/10.1021/i360050a008
|
[36]
|
Perez, S., Baldwin, P.M. and Gallant, D.J. (2004) Structural Features of Starch Granules I. In: James, B. and Roy, W., Eds., Starch, 3rd Edition, Academic Press, San Diego, Chapter 5.
|
[37]
|
Averous, L. and Halley, P.J. (2009) Biocomposites Based on Plasticized Starch. Biofuels, Bioproducts and Biorefining, 3, 329-343. https://doi.org/10.1002/bbb.135
|
[38]
|
Averous, L. (2004) Biodegradable Multiphase Systems Based on Plasticized Starch: A Review. Journal of Macromolecular Science Part C Polymer Reviews, 44, 231-274. https://doi.org/10.1081/MC-200029326
|
[39]
|
Sagnelli, D., Hooshmand, K., Kemmer, G.C., et al. (2017) Cross-Linked Amylose Bio-Plastic: A Transgenic-Based Compostable Plastic Alternative. International Journal of Molecular Sciences, 18, 2075. https://doi.org/10.3390/ijms18102075
|
[40]
|
Suryadevara, V., Lankapalli, S.R., Danda, L.H., Pendyala, P. and Katta, V. (2017) Studies on Jackfruit Seed Starch as a Novel Natural Superdisintegrant for the Design and Evaluation of Irbesartan Fast Dissolving Tablets. Integrative Medicine Research, 6, 280-291. https://doi.org/10.1016/j.imr.2017.04.001
|
[41]
|
Rengsutthi, K. and Charoenrein, S. (2011) Physico-Chemical Properties of Jackfruit Seed Starch (Artocarpus heterophyllus) and Its Application as a Thickener and Stabilizer in Chilli Sauce. LWT—Food Science and Technology, 44, 1309-1313. https://doi.org/10.1016/j.lwt.2010.12.019
|
[42]
|
Lopez, O.V. and Garcia, M.A. (2012) Starch Films from a Novel (Pachyrhizus ahipa) and Conventional Sources: Development and Characterization. Materials Science and Engineering: C, 32, 1931-1940. https://doi.org/10.1016/j.msec.2012.05.035
|
[43]
|
Dias, A.B., Muller, C.M.O., Larotonda, F.D.S. and Laurindo, J.B. (2010) Biodegradable Films Based on Rice Starch and Rice Flour. Journal of Cereal Science, 51, 213-219. https://doi.org/10.1016/j.jcs.2009.11.014
|
[44]
|
Zhou, Z., Robards, K., Helliwell, S. and Blanchard, C. (2002) Composition and Functional Properties of Rice. International Journal of Food Science & Technology, 37, 849-868. https://doi.org/10.1046/j.1365-2621.2002.00625.x
|
[45]
|
Mali, S., Sakanaka, L.S., Yamashita, F. and Grossmann, M.V.E. (2005) Water Sorption and Mechanical Properties of Cassava Starch Films and Their Relation to Plasticizing Effect. Carbohydrate Polymers, 60, 283-289. https://doi.org/10.1016/j.carbpol.2005.01.003
|
[46]
|
Mariappan Kadarkarainadar, M., Jawaid, M. and Asim, M. (2019) Corn and Rice Starch-Based Bio-Plastics as Alternative Packaging Materials. Fiber, 7, 32. https://doi.org/10.3390/fib7040032
|
[47]
|
Gadhave, R.V., Das, A., Mahanwar, P.A. and Gadekar, P.T. (2018) Starch Based Bio-Plastics: The Future of Sustainable Packaging. Open Journal of Polymer Chemistry, 8, 21-33. https://doi.org/10.4236/ojpchem.2018.82003
|
[48]
|
Larotonda, F., Hilliou, L., Sereno, A. and Gonçalves, M. (2005) Green Edible Films Obtained from Starch-Domestic Carrageenan Mixtures.
|
[49]
|
Sagnelli, D., Hebelstrup, K.H., Leroy, E., Rolland-Sabate, A., Guilois, S., Kirkensgaard, J.J.K., Mortensen, K., Lourdin, D. and Blennow, A. (2016) Plant-Crafted Starches for Bioplastics Production. Carbohydrate Polymers, 152, 398-408. https://doi.org/10.1016/j.carbpol.2016.07.039
|
[50]
|
Mooney, B.P. (2009) The Second Green Revolution? Production of Plant-Based Biodegradable Plastics. Biochemical Journal, 418, 219-232. https://doi.org/10.1042/BJ20081769
|
[51]
|
Cereda, M.P., Henrique, C.M., Oliveira, M.A., Ferraz, M.V. and Vicentini, N.V. (2000) Characterization of Edible Films of Cassava Starch by Electron Microscopy. Brazilian Journal of Food Technology, 3, 91-95.
|
[52]
|
Narayan, R., Bloembergen, S. and Lathia, A. (1999) Method of Preparing Biodegradable Modified-Starch Moldable Products and Films. USA Patent No. 5,869,647.
|
[53]
|
Alobi, N.O., Sunday, E.A., Magu, T.O., Oloko, G.O. and Nyong, B.E. (2017) Analysis of Starch from Non-Edible Root and Tubers as Sources of Raw Materials for the Synthesis of Biodegradable Starch Plastics. Journal of Basic and Applied Research, 3, 27-32.
|
[54]
|
Oladayo, O.O., Umunna, Q.C., Joseph, O.S. and Oluwasegun, W. (2016) Physicochemical Chemical Properties of Cassava Starch and Starch-Keratin Prepared Biofilm. Songklanakarin Journal of Science and Technology, 38, 349-355.
|
[55]
|
Mojzoobi, M.R., Coonock, A.J., Hill, M.S. and Harding, S.E. (2003) Partial Fractionation of Wheat Starch Amylose and Amylopectin Using Zonal Ultra-Centrifugation. Carbohydrate Polymer, 52, 269-274. https://doi.org/10.1016/S0144-8617(02)00295-3
|
[56]
|
Lusser, M., Parisi, C., Plan, D. and Rodriguez-Cerezo, E. (2012) Deployment of New Biotechnologies in Plant Breeding. Nature Biotechnology, 30, 231-239. https://doi.org/10.1038/nbt.2142
|
[57]
|
Adikwu, M.U. (1998) Molecular Weight and Amylose/Amylopectin Ratio of the Starch from Gladiolus Actinomorphantus. Nigerian Journal of Natural Products and Medicine, 2, 54-56. https://doi.org/10.4314/njnpm.v2i1.11786
|
[58]
|
Ahimbisibwe, M., Banadda, N., Seay, J., Nabuuma, B., Atwiju-kire, E., Wembabazi, E. and Nuwamanya, E. (2019) Influence of Weather and Purity of Plasticizer on Degradation of Cassava Starch Bioplastics in Natural Environmental Conditions. Journal of Agricultural Chemistry and Environment, 8, 237-250. https://doi.org/10.4236/jacen.2019.84018
|
[59]
|
Xie, F., Yu, L., Chen, L. and Li, L. (2008) A New Study of Starch Gelatinization under Shear Stress Using Dynamic Mechanical Analysis. Carbohydrate Polymers, 72, 229-234. https://doi.org/10.1016/j.carbpol.2007.08.007
|
[60]
|
Callari, J. (1998) Blown Film Strategies: With the Right Technology, You Can Go Where the Growth Is. Plastics Technology, February, 32.
|
[61]
|
Butler, T. (1995) How to Extrude Plastomer Blown Film. Plastics Technology, February, 50.
|
[62]
|
Shogren, R. (1998) Starch: Properties and Materials Applications. In: Kaplan, D., Ed., Biopolymers from Renewable Resources, Springer, Berlin, New York, 30-46. https://doi.org/10.1007/978-3-662-03680-8_2
|
[63]
|
Kalichevsky, M.T., Jaroszkiewicz, E.M., Ablett, S., Blanshard, J.M.V. and Lillford, P.J. (1992) The Glass-Transition of Amylopectin Measured by Dsc, Dmta and Nmr. Carbohydrate Polymers, 18, 77-88. https://doi.org/10.1016/0144-8617(92)90129-E
|
[64]
|
Bilotti, E., Fischer, H.R. and Peijs, T. (2008) Polymer Nanocomposites Based on Needle-Like Sepiolite Clays: Effect of Functionalized Polymers on the Dispersion of Nanofiller, Crystallinity, and Mechanical Properties. Journal of Applied Polymer Science, 107, 1116-1123. https://doi.org/10.1002/app.25395
|
[65]
|
Gidley, M.J. (1985) Quantification of the Structural Features of Starch Polysaccharides by NMR Spectroscopy. Carbohydrate Research, 139, 85-94. https://doi.org/10.1016/0008-6215(85)85074-6
|
[66]
|
Bigio, D.I. (1997) Scale-Up in Polymer Processing. Extrusion Division RETEC, Asheville.
|
[67]
|
Dean, K., Yu, L. and Wu, D.Y. (2007) Preparation and Characterization of Melt-Extruded Thermoplastic Starch/Clay Nanocomposites. Composites Science and Technology, 67, 413-421. https://doi.org/10.1016/j.compscitech.2006.09.003
|
[68]
|
Wang, J., Yu, L., Xie, F., Chen, L., Li, X. and Liu, H. (2010) Rheological Properties and Phase Transition of Cornstarches with Different Amylose/Amylopectin Ratios under Shear Stress. Starch-Starke, 62, 667-675. https://doi.org/10.1002/star.201000059
|
[69]
|
Decaen, P., Rolland-Sabaté, A., Colomines, G., Guilois, S., Lourdin, D., Valle, G.D. and Leroy, E. (2020) Influence of Ionic Plasticizers on the Processing and Viscosity of Starch Melts. Carbohydrate Polymers, 230, 115591. https://doi.org/10.1016/j.carbpol.2019.115591
|
[70]
|
Lourdin, D., Dellavalle, G. and Colonna, P. (1995) Influence of Amylose Content on Starch Films and Foams. Carbohydrate Polymers, 27, 261-270. https://doi.org/10.1016/0144-8617(95)00071-2
|
[71]
|
Hoover, R. (2001) Composition, Molecular Structure, and Physicochemical Properties of Tuber and Root Starches: A Review. Carbohydrate Polymers, 45, 253-267. https://doi.org/10.1016/S0144-8617(00)00260-5
|
[72]
|
Morrison, W.R., Tester, R.F., Snape, C.E., Law, R. and Gidley, M.J. (1993) Swelling and Gelatinisation of Cereal Starches. IV. Some Effects of Lipid-Complexed Amylose and Free Amylose in Waxy and Normal Barley Starches. Cereal Chemistry, 70, 385-391.
|
[73]
|
Bocharnikova, I., Wasserman, L.A., Krivandin, A.V., Fornal, J., Blaszczak, W., Chernykh, V.Y., et al. (2003) Structure and Thermodynamic Melting Parameters of Wheat Starches with Different Amylose Content. Journal of Thermal Analysis and Calorimetry, 74, 681-695. https://doi.org/10.1023/B:JTAN.0000011001.02981.88
|
[74]
|
Tan, I., Torley, P.J. and Halley, P.J. (2008) Combined Rheological and Optical Investigation of Maize, Barley and Wheat Starch Gelatinisation. Carbohydrate Polymers, 72, 272-286. https://doi.org/10.1016/j.carbpol.2007.08.018
|
[75]
|
Cheetham, N.W.H. and Tao, L. (1998) Variation in Crystalline Type with Amylose Content in Maize Starch Granules: An X-Ray Powder Diffraction Study. Carbohydrate Polymers, 36, 277-284. https://doi.org/10.1016/S0144-8617(98)00007-1
|
[76]
|
Rauwendaal, C. (2001) Polymer Extrusion. Carl Hanser, Munich. https://doi.org/10.1002/0471440264.pst126
|
[77]
|
Tadmor, Z. and Klein, I. (1970) Engineering Principles of Plasticating Extrusion. Van Nostrand Reinhold, New York.
|
[78]
|
Cantor, K. (1990) An Optimization Technique for the Extrusion of Blown Film Polyethylene. MS Thesis, Pennsylvania State University, State College.
|
[79]
|
Chung, C.I. (2011) Extrusion of Polymers Theory and Practice. Hanser, Munich, 344-355.
|
[80]
|
Sodergard, A., Selin, J.-F., Niemi, M., Johansson, C.-J. and Meinander, K. (2003) Processable Poly(hydroxy acids). US Patent 6,559,244B1.
|
[81]
|
Hiltunen, E., Selin, J.-F. and Skog, M. (2000) Polyactide Films. US Patent 6,117,928.
|
[82]
|
Schmack, G., Tandler, B., Vogel, R., Beyreuther, R., Jacobsen, S. and Fritz, H.G. (1999) Biodegradable Fibers of Poly(l-lactide) Produced by High-Speed Melt Spinning and Spin Drawing. Journal of Applied Polymer Science, 73, 2785-2797. https://doi.org/10.1002/(SICI)1097-4628(19990929)73:14<2785::AID-APP1>3.0.CO;2-L
|
[83]
|
Randall, J.R., Ryan, C.M., Lunt, J., Hartman, M.H., Hall, E.S., Kolstad, J.J., et al. (2002) Impact Modified Melt-Stable Lactide Polymer Compositions and Processes for Manufacture Thereof. US Patent 6,495,631.
|
[84]
|
Li, M., Liu, P., Zou, W., Yu, L., Xie, F., Pu, H., et al. (2011) Extrusion Processing and Characterization of Edible Starch Films with Different Amylose Contents. Journal of Food Engineering, 106, 95-101. https://doi.org/10.1016/j.jfoodeng.2011.04.021
|
[85]
|
Walenta, E., Fink, H.-P., Weigel, P., Ganster, J. and Schaaf, E. (2001) Structure-Property Relationships of Extruded Starch, 2 Extrusion Products from Native Starch. Macromolecular Materials and Engineering, 286, 462-471. https://doi.org/10.1002/1439-2054(200108)286:8<462::AID-MAME462>3.0.CO;2-A
|
[86]
|
Ziegler-Borowska, M., Wegrzynowska-Drzymalska, K., Chelminiak-Dudkiewicz, D., Kowalonek, J. and Kaczmarek, H. (2018) Photochemical Reactions in Dialdehyde Starch. Molecules, 23, 3358. https://doi.org/10.3390/molecules23123358
|
[87]
|
Graaf, R.A., De Karman, A.P. and Janssen, L.P.B.M. (2003) Material Properties and Glass Transition Temperatures of Different Thermoplastic Starches after Extrusion Processing. Starch, 55, 80-86. https://doi.org/10.1002/star.200390020
|
[88]
|
Oniszczuk, T. and Janssen, L.P.B.M. (2009) Influence of Addition of Fiber on the Mechanical Properties of TPS Moldings. In: Janssen, L.P.B.M. and Moscicki, L., Eds., Thermoplastic Starch. A Green Material for Various Industries, Wiley-VCH, Weinheim, 197-208. https://doi.org/10.1002/9783527628216.ch11
|
[89]
|
Wójtowicz, A. (2009) The Melting Process in Thermoplastic Starches. In: Janssen, L. and Moscicki, L., Eds., Thermoplastic Starch. A Green Material for Various Industries, Wiley, Weinheim, 105-117. https://doi.org/10.1002/9783527628216.ch5
|
[90]
|
You, X., Li, L., Gao, J., Yu, J. and Zhao, Z. (2003) Biodegradable Extruded Starch Blends. Journal of Applied Polymer Science, 88, 627-635. https://doi.org/10.1002/app.11533
|
[91]
|
van den Einde, R., Bolsius, A., van Soest, J., Janssen, L., van der Goot, A. and Boom, R. (2004) The Effect of Thermomechanical Treatment on Starch Breakdown and the Consequences for Process Design. Carbohydrate Polymers, 55, 57-63. https://doi.org/10.1016/j.carbpol.2003.07.004
|
[92]
|
Mościcki, L., Mitrus, M., Wójtowicz, A., Oniszczuk, T., Rejak, A. and Janssen, L. (2012) Application of Extrusion-Cooking for Processing of Thermoplastic Starch (TPS). Food Research International, 47, 291-299. https://doi.org/10.1016/j.foodres.2011.07.017
|
[93]
|
Stasiak, M., Molenda, M., Opaliński, I. and Blaszczak, W. (2013) Mechanical Properties of Native Corn, Wheat and Potato Starches. Czech Journal of Food Sciences, 31, 347-354. https://doi.org/10.17221/348/2012-CJFS
|
[94]
|
Zhang, J.-F. and Sun, X. (2007) Biodegradable Foams of Poly(lactic acid)/Starch. I. Extrusion Condition and Cellular Size Distribution. Journal of Applied Polymer Science, 106, 857-862. https://doi.org/10.1002/app.26715
|
[95]
|
Kuusipalo, J. (2001) Starch-Based Polymers in Extrusion Coating. Journal of Polymers and the Environment, 9, 125-135. https://doi.org/10.1023/A:1020402911494
|
[96]
|
Koppolu, R., Lahti, J., Abitbol, T., Swerin, A., Kuusipalo, J. and Toivakka, M. (2019) Continuous Processing of Nanocellulose and Polylactic Acid into Multilayer Barrier Coatings. ACS Applied Materials & Interfaces, 11, 11920-11927. https://doi.org/10.1021/acsami.9b00922
|
[97]
|
Matzinos, P., Tserki, V., Kontoyiannis, A. and Panayiotou, C. (2002) Processing and Characterization of Starch/Polycaprolactone Products. Polymer Degradation and Stability, 77, 17-24. https://doi.org/10.1016/S0141-3910(02)00072-1
|
[98]
|
Tajuddin, S., Xie, F., Nicholson, T.M., Liu, P. and Halley, P.J. (2011) Rheological Properties of Thermoplastic Starch Studied by Multipass Rheometer. Carbohydrate Polymers, 83, 914-919. https://doi.org/10.1016/j.carbpol.2010.08.073
|
[99]
|
Della Valle, G., Boche, Y., Colonna, P. and Vergnes, B. (1995) The Extrusion Behaviour of Potato Starch. Carbohydrate Polymers, 28, 255-264. https://doi.org/10.1016/0144-8617(95)00111-5
|
[100]
|
Follain, N., Joly, C., Dole, P., Roge, B. and Mathlouthi, M. (2006) Quaternary Starch Based Blends: Influence of a Fourth Component Addition to the Starch/Water/ Glycerol System. Carbohydrate Polymers, 63, 400-407. https://doi.org/10.1016/j.carbpol.2005.09.008
|
[101]
|
Maddams, W. and Preedy, J. (1978) X-Ray Diffraction Orientation Studies on Blown Polyethylene Films. I. Preliminary Measurements. Journal of Applied Polymer Science, 22, 2721-2737. https://doi.org/10.1002/app.1978.070221001
|
[102]
|
Kwack, T., Han, C. and Vickers, M. (1988) Development of Crystalline Structure during Tubular Film Blowing of Low-Density Polyethylene. Journal of Applied Polymer Science, 35, 363-389. https://doi.org/10.1002/app.1988.070350207
|
[103]
|
Fahrngruber, B., Siakkou, E., Wimmer, R., Kozich, M. and Mundigler, N. (2017) Malic Acid: A Novel Processing Aid for Thermoplastic Starch/Poly(butylene adipate-co-terephthalate) Compounding and Blown Film Extrusion. Journal of Applied Polymer Science, 134, 45539. https://doi.org/10.1002/app.45539
|
[104]
|
Giles, H.F., et al. (2014) Extrusion: The Definitive Processing Guide and Handbook. Second Edition, Crescent Associates Inc., Rochester, 540-541.
|
[105]
|
Brampton Engineering Inc., 8031 Dixie Road, Brampton, Ontario.
|
[106]
|
Reifenhauser Incorporated, 2 Washington Street, Ipswich, MA.
|
[107]
|
American Kuhne Inc., 31 Connecticut Avenue, Norwich, CT 06360.
|
[108]
|
Black Clawson Converting Machinery LLC, 46 North First Street, Fulton, NY.
|
[109]
|
Feiertag, B.A. (1999) Air Entrainment in Plastic Film Handling and Windingdthe State of the Art. ANTEC Conference Proceeding, New York, 283.
|
[110]
|
A. R. Engineering Machine Inc., 1061 Brevik Place, Mississaugua, Ontario.
|
[111]
|
NDC Infrared Engineering, 5314 North Irwindale Ave., Irwindale, CA.
|
[112]
|
Gupta, A., Simpson, D. and Harrison, I. (1993) A Morphological Study of HDPE-Blown Films Using Small-Angle X-Ray Scattering. Journal of Applied Polymer Science, 50, 2085-2093. https://doi.org/10.1002/app.1993.070501206
|
[113]
|
(2008) Piggy-Back Extruders for 11-Layer Blown Film. Plastics Technology, June, 19.
|
[114]
|
Plast-Control Inc., 29 Green Street, Newburyport, MA.
|
[115]
|
Anonymous (1996) What You Need to Know about Running Metallocene LLDPEs. Plastics World, July, 41.
|
[116]
|
Dowd, L.E. (1986) Blown Film Extrusion. United States Patent 4632801.
|
[117]
|
Todd, H.R., Allen, K.D. and Alting, L. (1994) Manufacturing Processes Reference Guide. Industrial Press Inc., 131-132.
|
[118]
|
Thurnwall, M., Kutanova, V., Boldizar, A. and Rigdahl, M. (2008) Film Blowing of Thermoplastic Starch. Carbohydrate Polymers, 71, 583-590. https://doi.org/10.1016/j.carbpol.2007.07.001
|
[119]
|
Thuwall, M., Boldizar, A. and Rigdahl, M. (2006) Extrusion Processing of High Amylose Potato Starch Materials. Carbohydrate Polymers, 65, 441-446. https://doi.org/10.1016/j.carbpol.2006.01.033
|
[120]
|
Addex Inc., 295 Lincoln Street, Hingham, MA.
|
[121]
|
Chinsirikul, W., Kerddonfag, N., Winotapun, C. and Khumsang, P. (2008) Plastic Extrusion Asia. Tech. Paper, 55.
|
[122]
|
Wu, C.Y., Lui, W.B. and Peng, J. (2018) Optimization of Extrusion Variables and Maleic Anhydride Content on Biopolymer Blends Based on Poly(hydroxybutyrate-co-hydroxyvalerate)/Poly(vinyl acetate) with Tapioca Starch. Polymers, 10, 827. https://doi.org/10.3390/polym10080827
|
[123]
|
Nasr, M., Tawfik, A., Suzuki, M. and Ookawara, S. (2014) Mathematical Modeling of Bio-Hydrogen Production from Starch Wastewater via Up-Flow Anaerobic Staged Reactor. Desalination and Water Treatment, 54, 50-58. https://doi.org/10.15376/biores.8.4.4951-4968
|
[124]
|
Rakos, R. and Sebastian, D. (1990) Design and Optimization of Extrusion Dies Using Computer Based Simulations. Advances in Polymer Technology, 10, 297-307. https://doi.org/10.1002/adv.1990.060100406
|
[125]
|
Chabrat, E., Rouilly, A., Evon, P., Longieras, A. and Rigal, L. (2010) Relevance of Lab-Scale Conical Twin-Screw Extruder for Thermoplastic STARCH/PLA Blends Rheology Study. PPS-26 Polymer Processing Society 24th Annual Meeting, 4-8 July 2010.
|
[126]
|
Martin, O., Averous, L. and Della Valle, G. (2003) In-Line Determination of Plasticized Wheat Starch Viscoelastic Behavior: Impact of Processing. Carbohydrate Polymers, 53, 169-182. https://doi.org/10.1016/S0144-8617(03)00040-7
|
[127]
|
Rudnik, E. (2008) Compostable Polymer Materials. Elsevier Publishing, Amsterdam, 28-31, 183-198.
|
[128]
|
Madival, S., Auras, R., Singh, S. and Narayan, R. (2009) Assessment of the Environmental Profile of PLA, PET and PS Clamshell Containers Using LCA Methodology. Journal of Cleaner Production, 17, 1183-1194. https://doi.org/10.1016/j.jclepro.2009.03.015
|
[129]
|
Vink, E., Davies, S. and Kolstad, J. (2010) The Eco-Profile for Current Ingeo® Polylactide Production. Industrial Biotechnology, 6, 212-225. https://doi.org/10.1089/ind.2010.6.212
|
[130]
|
Greene, J.P. (2014) Sustainable Plastics: Environmental Assessments of Biobased, Biodegradable, and Recycled Plastics. John Wiley & Sons, Inc., Hoboken.
|
[131]
|
Zanela, J., Casagrande, M., Reis, M.O., Grossmann, M.V.E. and Yamashita, F. (2017) Biodegradable Sheets of Starch/Polyvinyl Alcohol (PVA): Effects of PVA Molecular Weight and Hydrolysis Degree. Waste and Biomass Valorization, 10, 319-326. https://doi.org/10.1007/s12649-017-0051-6
|
[132]
|
Zanela, J., Bilck, A.P., Casagrande, M., Grossmann, M.V.E. and Yamashita, F. (2018) Oat Fiber as Reinforcement for Starch/Polyvinyl Alcohol Materials Produced by Injection Molding. Starch-Stärke, 70, Article ID: 1700248. https://doi.org/10.1002/star.201700248
|
[133]
|
Cantor, K. (2019) Blown Film Extrusion. Hanser, Munich. https://doi.org/10.3139/9781569906972.fm
|
[134]
|
Ahammad, M. and Minh Nguyen, T. (2016) Influence of the Presence of Chemical Additives on the Thermal Properties of Starch. Food and Nutrition Sciences, 7, 782-796. https://doi.org/10.4236/fns.2016.79079
|
[135]
|
Shah, A.A., Hasan, F., Hameed, A. and Ahmed, S. (2008) Biological Degradation of Plastics: A Comprehensive Review. Biotechnology Advances, 26, 246-265. https://doi.org/10.1016/j.biotechadv.2007.12.005
|
[136]
|
Emadian, S.M., Onay, T.T. and Demirel, B. (2017) Biodegradation of Bioplastics in Natural Environments. Waste Management, 59, 526-536. https://doi.org/10.1016/j.wasman.2016.10.006
|
[137]
|
Rudnik, E. and Briassoulis, D. (2011) Degradation Behaviour of Poly(lactic acid) Films and Fibres in Soil under Mediterranean Field Conditions and Laboratory Simulations Testing. Industrial Crops and Products, 33, 648-658. https://doi.org/10.1016/j.indcrop.2010.12.031
|
[138]
|
Williams, E. and Williams, P. (1997) Analysis of Products Derived from Fast Pyrolysis of Plastic Waste. Journal of Analytical and Applied Pyrolysis, 40-41, 347-363. https://doi.org/10.1016/S0165-2370(97)00048-X
|
[139]
|
Kurokawa, H., Ohshima, M., Sugiyama, K. and Miura, H. (2003) Methanolysis of Polyethylene Terephthalate (PET) in the Presence of Aluminium Triisopropoxide Catalyst to Form Dimethyl Terephthalate and Ethylene Glycol. Polymer Degradation and Stability, 79, 529-533. https://doi.org/10.1016/S0141-3910(02)00370-1
|
[140]
|
Basurko, O. and Mesbahi, E. (2014) Methodology for the Sustainability Assessment of Marine Technologies. Journal of Cleaner Production, 68, 155-164. https://doi.org/10.1016/j.jclepro.2012.01.022
|
[141]
|
Narayan, R. (2011) Rationale, Drivers, Standards, and Technology for Biobased Materials. In: Graziani, M. and Fornasiero, P., Eds., Renewable Resources and Renewable Energy: A Global Challenge, 2nd Edition, CRC Press, Boca Raton, 10-16.
|
[142]
|
Chen, F., Zhang, M. and Wu, Z. (2010) Toward Delivery of Multiple Growth Factors in Tissue Engineering. Biomaterials, 31, 6279-6308. https://doi.org/10.1016/j.biomaterials.2010.04.053
|
[143]
|
Lasprilla, A., Martinez, G., Lunelli, B., Jardini, A. and Filho, R. (2012) Poly-Lactic Acid Synthesis for Application in Biomedical Devoces—A Review. Biotechnology Advances, 30, 321-328. https://doi.org/10.1016/j.biotechadv.2011.06.019
|
[144]
|
Dearnaley, G. and Arps, J. (2005) Biomedical Applications of Diamond-Like Carbon (DLC) Coatins: A Review. Surface & Coatings Technology, 200, 2518-2524. https://doi.org/10.1016/j.surfcoat.2005.07.077
|