Stir Casting; Processing Temperature; Holding Time - Articles

Effect of Processing Paramters on Metal Matrix Composites: Stir Casting Process (Articles)

G. G. Sozhamannan, S. Balasivanandha Prabu, V. S. K. Venkatagalapathy

J. of Surface Engineered Materials and Advanced Technology Vol.2 No.1，January 12, 2012

DOI: 10.4236/jsemat.2012.21002 18,712 Downloads 45,425 Views Citations
Microstructural and Mechanical Characterization of Chicken Eggshell-Reinforced Al6061 Matrix Composites (Articles)

Surendra Kumar Dwiwedi, Ashok Kumar Srivastava, Koh-ichi Sugimoto, Manoj Chopkar

Open Journal of Metal Vol.8 No.1，March 27, 2018

DOI: 10.4236/ojmetal.2018.81001 1,344 Downloads 3,040 Views Citations
Visualization of Temperature and Flow Behavior in a Continuous Pasteurizer Using Computation Fluid Dynamics (Articles)

Emmanuel Baidhe, Julia Kigozi, Hussein Kivumbi Balimunsi

Open Access Library Journal Vol.9 No.9，September 21, 2022

DOI: 10.4236/oalib.1108888 99 Downloads 804 Views Citations
Effect of Electroless Copper Coating on the Corrosion Behavior of Aluminium Based Metal Matrix Composites Reinforced with Silicon Carbide Particles (Articles)

Mohamed Zakaulla, A. R. Anwar Khan, P. G. Mukunda

J. of Minerals and Materials Characterization and Eng. Vol.2 No.1，January 10, 2014

DOI: 10.4236/jmmce.2014.21004 5,009 Downloads 7,252 Views Citations
Study of Microstructure and Mechanical Behavior of Aluminum/Garnet/Carbon Hybrid Metal Matrix Composites (HMMCs) Fabricated by Chill Casting Method (Articles)

M. G. Anantha Prasad, Nityanand Bandekar

Journal of Materials Science and Chemical Engineering Vol.3 No.3，March 12, 2015

DOI: 10.4236/msce.2015.33001 4,112 Downloads 5,757 Views Citations
Corrosion Behaviour of Al6061-Frit Particulate Metal Matrix Composites in Sodium Chloride Solution (Articles)

Dasappa Ramesh, Ragera Parameshwarappa Swamy, Tumkur Krishnamurthy Chandrashekar

J. of Minerals and Materials Characterization and Eng. Vol.1 No.1，January 26, 2013

DOI: 10.4236/jmmce.2013.11003 3,813 Downloads 6,037 Views Citations
Equal Channel Angular Pressing of Al-SiC Composites Fabricated by Stir Casting (Articles)

Farouk Shehata, Nahed ElMahallawy, Mohamed Arab, Mohamed Agwa

Open Journal of Metal Vol.3 No.2A，July 16, 2013

DOI: 10.4236/ojmetal.2013.32A1004 5,467 Downloads 10,337 Views Citations
This article belongs to the Special Issue on
Comparative Studies on Microstructure and Mechanical Properties of Granulated Blast Furnace Slag and Fly Ash Reinforced AA 2024 Composites (Articles)

Inampudi Narasimha Murthy, Nallabelli Arun Babu, Jinugu Babu Rao

J. of Minerals and Materials Characterization and Eng. Vol.2 No.4，July 28, 2014

DOI: 10.4236/jmmce.2014.24037 4,915 Downloads 6,635 Views Citations
Effect of Particulate Reinforcement on the Mechanical Properties of Al2024-WC MMCs (Articles)

K. Punith Gowda, J. N. Prakash, Shivashankare Gowda, B. Satish Babu

J. of Minerals and Materials Characterization and Eng. Vol.3 No.6，November 12, 2015

DOI: 10.4236/jmmce.2015.36049 5,607 Downloads 7,108 Views Citations
Heat Transfer Analysis during External Chilling of Composite Material Castings through Experimental and Finite Element (FE) Modelling (Articles)

Joel Hemanth

Modeling and Numerical Simulation of Material Science Vol.4 No.1，January 2, 2014

DOI: 10.4236/mnsms.2014.41001 5,287 Downloads 8,371 Views Citations
Effects of Variation of Some Process Variables on Recrystallization Rate of Aluminium Alloy (6063) (Articles)

O.E. Olorunniwo, P.O. Atanda, K.J. Akinluwade

J. of Minerals and Materials Characterization and Eng. Vol.8 No.1，January 20, 2009

DOI: 10.4236/jmmce.2009.81001 5,939 Downloads 8,153 Views Citations
Tribological Behaviour of Aluminium/Alumina/Graphite Hybrid Metal Matrix Composite Using Taguchi’s Techniques (Articles)

N. Radhika, R. Subramanian, S. Venkat Prasat

J. of Minerals and Materials Characterization and Eng. Vol.10 No.5，April 20, 2011

DOI: 10.4236/jmmce.2011.105032 11,495 Downloads 19,286 Views Citations
Mechanical and Machining Properties Analysis of Al6061-Cu-Reinforced SiC_P Metal Matrix Composite (Articles)

Serajul Haque, Prem Kumar Bharti, Akhtar Hussain Ansari

J. of Minerals and Materials Characterization and Eng. Vol.2 No.1，January 17, 2014

DOI: 10.4236/jmmce.2014.21009 6,502 Downloads 8,894 Views Citations
Influence of Boron Fiber Powder and Graphite Reinforcements on Physical and Mechanical Properties of Aluminum 2024 Alloy Fabricated by Stir Casting (Articles)

H. S. Kumaraswamy, Vinjamuri Bharat, T. Krishna Rao

J. of Minerals and Materials Characterization and Eng. Vol.7 No.3，April 19, 2019

DOI: 10.4236/jmmce.2019.73008 958 Downloads 2,043 Views Citations
Development and Characterization of Aluminium-Based Metal Matrix Composites (Articles)

M. A. Gafur, Al Fahad Ahmed, Raisul Abrar, Surya Sabrin Soshi

Materials Sciences and Applications Vol.14 No.1，January 29, 2023

DOI: 10.4236/msa.2023.141001 312 Downloads 1,602 Views Citations
Improvement in Tribological Properties of Surface Layer of an Al Alloy by Friction Stir Processing (Articles)

Soheyl Soleymani, Amir Abdollah-zadeh, Sima Ahamd Alidokht

J. of Surface Engineered Materials and Advanced Technology Vol.1 No.3，October 18, 2011

DOI: 10.4236/jsemat.2011.13014 6,527 Downloads 11,552 Views Citations
Influence of Microstructure and Experimental Parameters on Mechanical and Wear Properties of Al-TiC Surface Composite by FSP Route (Articles)

S. Jerome, S. Govind Bhalchandra, S.P. Kumaresh Babu, B. Ravisankar

J. of Minerals and Materials Characterization and Eng. Vol.11 No.5，May 18, 2012

DOI: 10.4236/jmmce.2012.115035 5,626 Downloads 7,417 Views Citations
Evaluation of Wear and Corrosion Properties of AA6061/TiB₂ Composites Produced by FSP Technique (Articles)

Dakarapu Santha Rao, Nallu Ramanaiah

J. of Minerals and Materials Characterization and Eng. Vol.5 No.6，October 19, 2017

DOI: 10.4236/jmmce.2017.56029 1,252 Downloads 3,074 Views Citations
Effect of Cooling Conditions on Mechanical and Microstructural Behaviours of Friction Stir Processed AZ31B Mg Alloy (Articles)

Sankar Ramaiyan, Rathinasuriyan Chandran, Senthil Kumar Velukkudi Santhanam

Modern Mechanical Engineering Vol.7 No.4，November 28, 2017

DOI: 10.4236/mme.2017.74010 1,815 Downloads 4,902 Views Citations
Taguchi Optimization of Process Parameters in Friction Stir Welding of 6061 Aluminum Alloy: A Review and Case Study (Articles)

Mohamadreza Nourani, Abbas S. Milani, Spiro Yannacopoulos

Engineering Vol.3 No.2，March 18, 2011

DOI: 10.4236/eng.2011.32017 12,381 Downloads 26,490 Views Citations

<12 3 ...>

	customer@scirp.org
	+86 18163351462(WhatsApp)
	1655362766

	Paper Publishing WeChat

All	Title	Abstract	Keywords
DOI	Author	Journal	Affiliation
ISSN	Subject

	customer@scirp.org
	+86 18163351462(WhatsApp)
	1655362766

	Paper Publishing WeChat

Browse Subjects

Publish with us

Home

About SCIRP

Service

Policies