M. Modesti, A. Lorenzetti, D. Bon and S. Besco, “Effect of Processing Conditions on Morphology and Mechanical Properties of Compatibilised Polypropylene Nanocompo- Sites,” Polymer, Vol. 46, No. 23, August 2005, pp. 10237-10245. doi:10.1016/j.polymer.2005.08.035

has been cited by the following article:

• TITLE: Poly (Ethylene–Co–Vinyl Acetate)/Clay Nanocomposites: Effect of Clay Nature and Compatibilising Agents on Morphological Thermal and Mechanical Properties

  AUTHORS: Elisabetta Ugel, Gaetano Giuliano, Michele Modesti

  KEYWORDS: EVA, Nanocomposites, Film Blowing, Hydrotalcite, Compatibiliser.

  JOURNAL NAME: Soft Nanoscience Letters, Vol.1 No.4, October 11, 2011

  ABSTRACT: A series of nanocomposites based on an ethylene vinyl acetate (EVA) copolymer with two types of inorganic clays was prepared by melt blending and film blowing.The tested clays were Hydrotalcite (a layered double hydroxide) and Dellite 72T (an organo-modified montmorillonite) in different percentage, the exfoliation degree of which has been evaluated in the presence of three types of compatibilisers. The nanocomposite morphology, thermal behaviour and mechanical properties were analysed as function of the nature and content of clays and in the presence of compatibilisers.