Antibiotic Effect on Planktonic and Biofilm-Producing Staphylococci ()
1. Introduction
The major causes of nosocomial and community-acquired infections and re- present a significant burden on the healthcare system are Staphylococcal species. Staphylococcus aureus attachment to medical implants and host tissue, and subsequent establishment of a mature biofilm, play an important role in the persistence of chronic infections [1] . According to the United States National Institutes of Health, more than 60% of all microbial infections are caused by biofilms [2] . Biofilms are an important microbial virulence factor associated with Staphylococci [3] [4] . Microbial biofilms are sessile microorganisms formed by cells that are attached to and embedded in a hydrated matrix of extracellular polymeric substances, where they grow as organized multicellular communities [5] [6] [7] . Bacteria prefer to live in biofilms for better survival. Growth within a biofilm can thwart immune function and antibiotic therapy and thereby complicate the treatment of infectious diseases, especially chronic and foreign device-associated infections [8] . Biofilm structural properties, as well as the physiological attributes of biofilm-forming organisms, lead to an inherent resistance to antibiotics by delaying the penetration of the biofilm matrix [9] . This increased antibiotic resistance holds serious consequences for infection control, treatment regimes, and disease progression. Biofilms can form on medical implants leading to increased morbidity and mortality of affected individuals [10] . Indeed, biofilm formation is a hallmark characteristic of infections caused by S. aureus and S. epidermidis, which consist of multiple bacterial layers encased within an exo-polysaccharide glycocalyx [11] . Some substances, including silver nanoparticles, have been used to decrease biofilm formation [12] . These nanoparticles have a higher capacity to attach to and penetrate bacterial membranes and accumulate inside cells, providing a continuous release of silver ions inside the cell, thereby preventing biofilm formation [13] .
This study aimed to look into the capability to form biofilm and antimicrobial resistance of 260 clinical isolates of COPS (n = 155) and CONS (n = 105).
2. Materials and Methods
2.1. Bacterial Isolates
In the present study, 260 clinical isolates of Staphylococci were recovered from 600 different clinical samples from patients attending Egyptian hospitals. The isolates were collected between January and April 2016. The staphylococcal species were isolated from different clinical infections including Prosthetic joint infection (n = 55), Folliculitis (n = 47), Carbuncle (n = 41), Abscesses (n = 35), Endocarditis (n = 34), Urine (n = 27), and Sputum (n = 21). The isolation and identification of these isolates were carried out in accordance with previously established methodologies [14] , and the API system [15] . API Staph strips utilizes a series of 10 biochemical tests, including alkaline phosphatase, urease, β-glucosidase, β-glucuronidase, and β-galactosidase activity, aerobic acid formation from mannose, mannitol, trehalose, and salicin, and utilization of arginine. The strip was inoculated with bacterial suspension which removed from an overnight culture inoculated on Trypticase soy agar plates containing 5% sheep blood. Reactions of cultures were determined after 5 h of incubation at 35˚C. The color of the strips would then change spontaneously or upon the addition of other reagents. These changes were recorded and interpreted using a reading table and by referring to the Analytical Profile Index.
2.2. Tissue Culture Plate Method for Biofilm Formation
The tissue culture plate (TCP) quantitative assay is widely used and considered as the standard for biofilm formation detection. As previously described by Christensen et al. [16] , we used 96 flat-bottom-well tissue culture plates, filling each well with 0.2 ml bacterial suspension (105 CFU/ml) in TSB. After 48 h incubation at 37˚C, the contents were aspirated and the plates were washed twice with phosphate buffered saline (PBS; pH 7.2). The wells were stained with 0.25% crystal violet for 30 s and then the plates were read in an enzyme-linked immunosorbent assay (ELISA) reader (BioTek, ELx808) at 490 nm. Sterile TSB was used as a negative control. Optical density values were then averaged. A 3-grade scale was used to evaluate slime producing ability of each strain: (−), OD < 0.500; (+), OD 0.500 - 1.500; (++), OD > 1.500. The interpretation of biofilm production as strong, moderate and weak/none was done according to the criteria of Stepanovic et al. [17] .
2.3. Scanning Electron Microscopy (SEM)
Pure colonies of suspected strains were added to 2.5% (v/v) glutaraldehyde in PBS (pH 7.2) for 1.5 h, rinsed with PBS, and then dehydrated in a series of alcohol/water solutions: 30%, 15 min; 50%, 15 min; 70%, 30 min; 90%, 60 min. Samples were dried and gold-palladium coated. SEM examinations were made using a JSM-840 SEM.
2.3.1. Antibiotic Sensitivity Test
Antimicrobial sensitivity tests of the isolated strains were carried out by the disk diffusion method using Mueller-Hinton agar plates. Test strains were pre-in- oculated in trypticase soy broth at 37˚C. This suspension was then used to inoculate Mueller-Hinton agar plates by swabbing them with a sterile cotton swab. Antimicrobial discs were placed into and gently pressed down on the surface of the agar plates. Plates were then incubated aerobically for 18 - 24 h at 37˚C, following which zones of inhibition were measured and recorded. The results were interpreted as sensitive, intermediate, and resistant according to the Clinical and Laboratory Standards Institute (CLSI) guidelines [18] . Twenty antibiotics were selected to represent different classes and mechanisms of action (gentamicin, amikacin, doxycycline, erythromycin, azithromycin; cephradine, cefotaxime, ceftazdime, cefuroxime, amoxicillin/clavulanic, oxacillin, methicillin, imipenem, vancomycin, ciprofloxacin, levofloxacin, rifampicin, trimethoprim, and novobiocin). Antibiotic solutions were prepared as 100 mM stocks in sterile distilled water.
2.3.2. MIC Determination
MICs were determined using the two-fold dilution method in accordance to the CLSI guidelines [18] . Different antibiotic concentrations were prepared (from 1 mg to 0.5 µg). On TSB, a concentration of 106 CFU/mL was used as the starting inoculation. MIC testing was carried out in flat-bottomed microtitre plates (Greiner, Wemmel, Belgium) and visually evaluated after 24 h incubation at 37˚C. MIC values were recorded after transferring 100 UL from each clear well of the microtitre plate to a tryptic soy agar (Lab M, International Medical) plate followed by 24 h incubation at 37˚C.
2.3.3. Biofilm Growth and Antibiotic Testing
Staphylococci were prepared and diluted in TSB to a starting concentration of 106 CFU/ml. Bacterial suspensions (100 UL) were added to 96-well plates. Non- inoculated TSB was included as a blank. Staphylococcal plates were incubated for 72 h at 37˚C on a horizontal shaking plate with growth medium changed every 24 h. Mature Staphylococcus biofilms were obtained after 72 h incubation at 37˚C. Prior to adding antibiotics, growth medium was discarded and biofilms were washed twice with PBS. Next, 100 µL of each antibiotic concentration and 100 µL of TSB/well were added to the biofilm plates. Un-treated biofilms (100% reference values) were obtained by adding 100 µL of sterile water instead of antibiotic. The plates were subsequently incubated at 37˚C for 24 h on a horizontal shaking plate.
2.4. MIC Determination by the BioTimer Assay Method (BTA)
The BTA method [19] uses BioTimer medium with Phenol Red (BT-PR medium) composed of Mueller Hinton broth (21 g), glucose (10 g), phenol red (25 mg), and distilled water to 1000 ml. After sterilization at 121˚C for 15 min, the pH was adjusted to 7.2 ± 0.1. BTA measures microbial metabolism: the time required for colour switch of phenol red indicator in BT-PR medium (red-to-yel- low) due to Staphylococcus metabolism, is correlated to initial bacterial concentration. Therefore, the time required for colour switch determines the number of bacteria present in a sample at Time 0 through a correlation line. To draw the correlation line specific for Staphylococcus spp., 0.2 ml of MH-overnight broth cultures were mixed with 1.8 ml of BT-PR medium. Serial two-fold dilutions in 1 ml of BT-PR medium were performed in microtiter plates and simulta neously counted using colony forming unit (CFU) method. Incubation was performed at 37˚C. The colour of the inoculated BT-PR medium was checked at regular time intervals. For each two-fold dilution, the time required for colour switch of BT- PR medium was recorded and plotted versus the log 10 of CFUs.
2.5. Planktonic Form
Antibiotic sensitivity tests on planktonic forms were performed by the broth dilution method in Mueller Hinton broth according to CLSI, 2015 [18] and in BT- PR medium broth according to the BTA method. A total of 105 CFU/ml from overnight broth cultures were used to inoculate each antibiotic dilution in 1 ml MH or BT-PR media. After overnight incubation at 37˚C, MICs were determined as the lowest antibiotic concentrations that inhibit bacterial growth or BT-PR medium color change.
2.6. Biofilm Form
The antibiotic sensitivity of Staphylococci biofilms was evaluated using the BTA method. Staphylococci strains were grown in the presence of sterile glass beads as described above. After incubation at 37˚C, colonized glass beads were washed three times in sterile saline solution. Antibiotic dilutions were prepared in 1 ml of BT-PR medium in 24-well plates. Each antibiotic dilution was inoculated with one colonized glass bead. As controls, two wells containing BT-PR medium without antibiotics were inoculated, with one colonized (Control A) and one containing only a sterile glass bead (Control B). After overnight incubation at 37˚C, the minimal biofilm inhibitory concentrations (MBICs) were determined as the lowest antibiotic concentration that inhibited a color switch of the inoculated BT-PR medium. To determine the minimal biofilm eradication concentrations (MBECs), glass beads from antibiotic dilutions that did not show a color switch were transferred to BT-PR medium without antibiotics. After incubating for 18 - 24 h at 37˚C, the wells containing unchanged BT-PR medium corresponding to the lowest antibiotic dilution represented the MBEC values.
3. Results
3.1. Identification of Isolated Strains
A total of 260 Staphylococcal strains were isolated from 600 different clinical specimens. Of these, 155 were COPS and 105 were CONS. From these, 124 (80%) and 63 (60%) were biofilm-producing strains, respectively (Table 1).
Biofilm-producing Staphylococci strains determined by the TCP method as COPS were classified as strong (80, 51.6%), moderate, (42, 27.1%), or weak/non- biofilm (33, 21.3%). Those determined to be CONS were also classified as strong (50, 47.6%), moderate (34, 32.4%), and weak/non-biofilm (21, 20%, Table 2).
3.2. Scanning Electron Microscopy Results
Biofilm-forming strains determined by the TCP method (Figure 1) were imaged using an SEM, which confirmed that all biofilm-forming strains identified by
Table 1. Coagulase-positive and coagulase-negative Staph biofilm formation using the tissue culture plate method (TCP).
Table 2. Tissue culture plate method classification of biofilm-forming staphylococci.
Figure 1. Biofilm formation by tissue culture plate (TCP) method.
TCP did produce biofilm (Figure 2(a), Figure 2(b) and Figure 3(a), Figure 3(b)). Overnight incubation with ciprofloxacin (128 µg/ml) led to reductions in biofilm formation, as indicated by cell detachment or sloughing (Figure 4(a) and Figure 4(b)).
3.3. Sensitivity Test by Disc Diffusion Method
Table 3 and Table 4 show that biofilm-forming strains were more resistant to antibiotics than non-biofilm-forming bacteria were.
3.4. MICs for COPS Planktonic and Biofilm-Producing Cells via the Microbroth Dilution Method
For planktonic strains, imipenem (IMP) showed the greatest effect; causing a complete reduction of all strains at a concentration of 32 µg/ml. However, AMC, CXT, and CIP caused a complete reduction at a concentration of 128 µg/ml, while VA caused a complete reduction at a concentration of 512 µg/ml, and GN at 1024 µg/ml.
For biofilm-producing strains, at a concentration of 512 µg/ml, IMP showed the highest effect, causing reduction in 97.5% of strains (119/122). Ciprofloxacin caused reduction in 95.1% of strains (116/122) at the same concentration. CXT, AMC, VA, and GN caused reductions in 93.4% (114/122), 90.9% (111/122), 86.8% (106/122), and 76.2% (93/122) of strains, respectively (Figure 5, Figure 6) (Table 5).
Table 5 and Table 6 show that MICs (as determined using the microbroth dilution method) for cells where a biofilm was present were higher than that for
Table 3. COPS antimicrobial sensitivity.
*Correlation between the number of sensitive strains to the number of biofilm-forming strains. **Correlation between the number of resistant strains to the number of non-biofilm forming strains. Ciprofloxacin (CIP), Levofloxacin (LEV), Gentamicin (GN), Rifampicin (RF), Azithromycin (AZM), Doxycycline (DO), Vancomycin (VA), Methicillin (ME), Amoxicillin/clavulanic acid (AMC), Cefotaxime (CXT), Ceftriaxone (CRO), Imipenem (IMP).
Table 4. CONS antimicrobial sensitivity.
*Correlation between the number of sensitive strains to the number of biofilm-forming strains. **Correlation between the number of resistant strains to the number of non-biofilm forming strains. Ciprofloxacin (CIP), Levofloxacin (LEV), Gentamicin (GN), Rifampicin (RF), Azithromycin (AZM), Doxacycline (DO), Vancomycin (VA), Methicillin (ME), Amoxicillin/clavulanic acid (AMC), Cefotaxime (CXT), Ceftriaxone (CRO), Imipenem (IMP).
planktonic cells. This indicates that the concentration required for a given antibiotic to completely eradicate biofilm strains was much higher than that required
Table 5. MICs for COPS planktonic and biofilm-forming cells by the microbroth dilution method.
Ciprofloxacin (CIP), Gentamicin (GN), Vancomycin (VA), Amoxicillin/clavulanic acid (AMC), Cefotaxime (CXT), Imipenem (IMP).
Table 6. MICs for CONS planktonic and biofilm forming cells by the microbroth dilution method.
Ciprofloxacin (CIP), Gentamicin (GN), Vancomycin (VA), Amoxicillin/clavulanic acid (AMC), Cefotaxime (CXT), Imipenem (IMP).
for planktonic cells. The results agree with those obtained by the BTA method (Table 7 and Table 8). In addition, Table 7 and Table 8 show that the MICs for biofilm cells were higher than that for planktonic cells, as determined by the
Figure 2. SEM image of biofilm-forming COPS.
Figure 3. SEM image of biofilm-forming CONS.
Figure 4. SEM image of biofilm-forming strains after overnight incubation with ciprofloxacin (128 µg). (a) COPS; (b) CONS.
Figure 5. MICs of ciprofloxacin for biofilm forming cells of COPS by BTA method.
Figure 6. MICs for biofilm-forming cells of CONS by BTA method.
Table 7. MICs for COPS planktonic and biofilm forming cells by the BTA method.
Ciprofloxacin (CIP), Gentamicin (GN), Vancomycin (VA), Amoxicillin/clavulanic acid (AMC), Cefotaxime (CXT), Imipenem (IMP).
Table 8. MICs for CONS planktonic and biofilm forming cells by the BTA method.
Ciprofloxacin (CIP), Gentamicin (GN), Vancomycin (VA), Amoxicillin/clavulanic acid (AMC), Cefotaxime (CXT), Imipenem (IMP).
BTA method.
4. Discussion
The structural and physiological properties of biofilm-producing organisms con- fer an inherent resistance to antimicrobial agents [20] . Since rates of antibiotic resistance are currently increasing owing to biofilm production in staphylococci, more research is needed to overcome this problem. The current study was carried out on 260 Staphylococcal spp. (coagulase-positive, 155; coagulase-negative, 105) strains. Of the COPS, 78.7% (122/155) of strains were biofilm producers, while of the CONS, 80% (84/105) of strains were biofilm producers. Biofilm-forming COPS strains, as determined via the TCP method, were classified as strong (51.6%, 80/155), moderate (27.1%, 42/155), or weak/non-biofilm forming (21.3%, 33/155). CONS strains were classified similarly, presenting 47.6% (50/105) strong, 32.4% (34/105) moderate, and 20% (21/105) weak/non-biofilm strains (Table 2).
Certain antibiotics were used to evaluate their effect on biofilm production by COPS and CONS strains. The results revealed that biofilm-producing bacteria were more resistant to antibiotics than non-biofilm-producing bacteria were (Table 4 and Table 5). The efficacies of these antibiotics were evaluated using a concentration range based on MIC. Antibiotics showed variable activity against COPS biofilms. For planktonic strains, imipenem (IMP) showed the greatest effect, causing a complete reduction of the bacterial strains at a concentration of 32 µg/ml. AMC, CXT, and CIP caused a complete reduction at a concentration of 128 µg/ml, while VA caused a complete reduction at 512 µg/ml, and finally GN caused a complete reduction at 1024 µg/ml. Regarding biofilm strains, at a concentration of 512 µg/ml, IMP gave the highest effect, causing reduction in 97.5% (119/122) of strains. Ciprofloxacin caused reduction in 95.1% (116/122) of strains at the same concentration, and CXT, AMC, VA, and GN caused reduction in 93.4% (114/122), 90.9% (111/122), 86.8% (106/122), and 76.2% (93/122) of strains (Table 5).
These results agree with those obtained by Tote et al. [21] and Mathur et al. [22] . They reported that S. epidermidis was able to produce biofilms and cause implant infections. The resistance of 342 clinical strains of S. epidermidis from orthopedic implant infections to 16 different antibiotics has been investigated previously. The isolates were phenotyped and genotyped for extracellular polysaccharide production relevant to staphylococcal biofilm formation in order to ascertain possible associations with antibiotic resistance. Approximately 10% of the isolates were found to be sensitive to all screened antibiotics. In all, 37% - 38% of strains were resistant to β-lactams such as oxacillin and imipenem, while resistance to penicillin, ampicillin, cefazolin, and cefamandole was observed con- sistently in over 80% of strains. About 41% and 16% of erythromycin- and clindamycin-resistant strains, respectively, were noted. Of the isolates, 10% were resistant to chloramphenicol, 23% to sulfamethoxazole, and 26% to ciprofloxacin. Resistance to vancomycin was never observed. Exopolysaccharide-producing strains exhibited a higher prevalence of resistance to the four aminoglycosides (gentamicin, amikacin, netilmicin, and tobramycin), sulfamethoxazole, and ciprofloxacin relative to non-producing isolates. Resistance to multiple antibiotics was more common among exopolysaccharide-forming strains.
Amorena et al. [23] reported that antibiotic susceptibility identification using the microbroth dilution method was similar when comparing suspensions of SP (slime producing) versus NSP (non-slime producing) variants of S. aureus isolates. The observation that antibiotic potency was 100% in the microbroth dilution tests at 1 × MBC but did not reach 1 × log10 CFU when antibiotics were used at 4 × MBC against young (6 h) TSB-grown biofilms may represent a warning signal concerning the exclusive use of classical in vitro tests. Singh et al. [24] found that the penetration of oxacillin, cefotaxime (β-lactams), and vancomycin (a glycopeptide) through S. aureus and S. epidermidis biofilms significantly decreased, whereas that of amikacin (an aminoglycoside) and ciprofloxacin (a fluoroquinolone) was unaffected. The in vitro killing effect of the widely used antibiotics (cephalothin, clindamycin, erythromycin, ofloxacin, rifampicin, teicoplanin, tetracycline, phosphomycin, and vancomycin) was comparatively analyzed previously by Oteiza [25] , on 24-h biofilms of 64 S. epidermidis clinical isolates. This effect was assessed at the expected antibiotic concentration reached in serum using ATP-bioluminescence. Erythromycin, rifampicin, tetracycline, and phosphomycin generally presented a higher killing effect than vancomycin, clindamycin, cephalothin, teicoplanin, and ofloxacin. Differences in the resistance profiles obtained in classical assays (broth microdilution and diffusion) did not help to predict differences in antibiotic killing potency in biofilms. Antibiotic killing potency decreased as biofilm age increased (from 6 to 24 or 48 h) for some antibiotics such as vancomycin, but that of rifampicin or tetracycline was not affected. Berlutti et al. [26] presented an improved method called the BioTimer assay, which can be successfully applied to directly enumerate Staphylococcus in biofilms without any sample manipulation. The BTA method can be used to count Staphylococcus via a genus-specific correlation line that correlates the time required for BT-PR medium color switch with the initial concentration of planktonic bacteria. To validate the BTA method, BTA results, both in counting and in evaluating MICs of planktonic Staphylococcus, have been compared to those obtained by reference methods.
Pantanella et al. [19] reported, using the BTA method, viable Staphylococcus in biofilms in the presence of sub-inhibitory antibiotic concentrations. This observation agrees with our results, indicating the close agreement between BTA and microbroth methods for planktonic cell MIC values. The antibiotic effects on COPS (as determined by the BTA method) showed that imipenem had the greatest effect on COPS planktonic cells, causing 100% reduction at a concentration of 128 µg/ml. However, reduction decreased to 98.3% at 64 µg/ml, 94.2% at 32 µg/ml, and 81.1% at 16 µg/ml, leaving 18.9% of the cells for facilitation of re-colonization at that concentration. Ciprofloxacin caused a 100% reduction at a concentration of 256 µg/ml. However, reduction decreased to 97.5% at 128 µg and 72.9% at 56 µg/ml, leaving 27.1% of the cells for re-colonization. Gentamicin eradicated 81.1% of the planktonic cells at a concentration of 128 µg/ml, and was the least active. We therefore concluded that at the same antibiotic concentration, the eradication of planktonic cells was much higher than that of biofilm cells. In other words, for a certain antibiotic, the concentration required for complete eradication of biofilm strains is much higher than that required for planktonic cells. These results agree with those obtained by the BTA method (Table 7 and Table 8), which also show that MICs of biofilm cells were higher than that of planktonic cells.
The effect of antibiotics on CONS strains showed that imipenem had the greatest effect on biofilm formation, causing an 87% reduction of the biofilm at a concentration of 256 µg/ml by the microtube dilution method and 84.5% reduction by the BTA method. Therefore, the MIC required, for any antibiotic, for the eradication of biofilm cells is much higher than that required for non-biofilm cells. The BTA method has been proven to be reliable.
Acknowledgements
The authors extend their appreciation to the College of Pharmacy Research Center, Deanship of Scientific Research at King Saud University for funding this work.
Conflict of Interests
The authors declare that there is no conflict of interests regarding the publication of this paper.