[1]
|
J. Sptanton and S. Nakaki, “Design guidelines for precast concrete seismic structural systems,” PRESSS Report No. 01/03-09, UW Report No. SM 02-02, Seattle, WA 98195, February 2002.
|
[2]
|
R. Hawileh, H. Tabatabai, A. Rahman, and A. Amro, “Non-dimensional design procedures for precast, prestressed concrete hybrid frames,” J PCI 2005, Vol. 51. No. 5, pp. 110-130, 2005.
|
[3]
|
R. Hawileh, A. Rahman, and H. Tabatabai, “3-D FE modeling and low-cycle fatigue fracture criteria of mild steel bars subjected to axial and bending loading,” Proceedings of McMat, Joint ASME/ASCE/SES Conference on Mechanics and Materials, Baton Rouge, Louisiana, June 2005.
|
[4]
|
G. S. Cheok and W. C. Stone, “Performance of 1/3 scale model precast concrete beam-column connections subjected to cyclic inelastic loads,” Report No. 4, Report No. NISTIR 5436, NIST, Gaithersburg, MD, June 1994.
|
[5]
|
J. B. Mander and F. D. Panthaki, “Low-cycle fatigue behavior of reinforcing steel,” Journal of Materials in Civil Engineering-ASCE, Vol. 6, No. 4, pp. 453-468, 1994.
|
[6]
|
W. Liu, “Low cycle fatigue of A36 steel bars subjected to bending with variable amplitudes,” Ph. D Thesis, State University of New York at Buffalo, 2001.
|
[7]
|
ANSYS. User’s manual. Version 8.0, 2004.
|
[8]
|
J. A. Collins, “Failure of materials in mechanical design,” Second Edition, Ohio State University, Columbus, OH, 1993.
|
[9]
|
S. S. Manson, “Behavior of materials under conditions of thermal stress,” Heat Transfer Symposium, University of Michigan Engineering Research Institute, Ann Arbor, Mich, pp. 9-75, 1953.
|
[10]
|
S. K. Koh and R. I. Stephens, “Mean stress effects on low cycle fatigue for high strength steel,” Fatigue Fracture of Engineering Materials and Structure, Vol. 14, No.4, pp. 413-428, 1991.
|
[11]
|
J. B. Mander and F. D. Panthaki, “Low-cycle fatigue behavior of reinforcing steel,” Journal of Materials in Civil Engineering-ASCE, Vol. 6, No. 4, pp. 453-468, 1994.
|
[12]
|
R. Hawileh, A. Rahman, and H. Tabatabai, “Low cycle fatigue criteria for mild steel bars under combined bending and axial loading,” IMAC-XXIII, Society for Experimental Mechanics, Inc, Orlando, Florida, February 2005.
|
[13]
|
D. J. Raynor, D. E. Lehman, and J. F. Stanton, “Bond-slip response of reinforcing bars grouted in ducts,” J ACI Structure, Vol. 99, No. 5, pp. 568-577, 2002.
|